Page 1 PROJECT: Vocational Training Improvement Project (VTIP) COUNTRY: India (amt in Rs.lakh) Name of the State: JAN FEB MAR APR MAY JUNE JULY AUG SEPT OCT NOV DEC JAN FEB M AR A PR MAY JUNE JULY AUG SEPT OCT NOV DEC APPRAISAL REVISED 1 4 5,8 11 ACTUAL APPRAISAL REVISED 1 4 5,8 11 ACTUAL APPRAISAL REVISED 1 4 5,8 11 ACTUAL APPRAISAL REVISED 1 4 5,8 11 ACTUAL APPRAISAL REVISED 1 4 5,8 11 ACTUAL APPRAISAL REVISED 1 4 5,8 11 ACTUAL APPRAISAL REVISED 1 4 5,8 11 ACTUAL POST POST NCB 211.20 PROCUREMENT PLAN FOR 2010-11 PROCUREMENT WILL BE DONE BY COMMISSIONER,SPIU,DET, KARNATAKA REVIEW BY BANK 2010 2011 SL. NO. DESCRIPTION OF ITEM AND QUANTITY METHOD OF PROCURE- MENT ESTIMAT- ED COST 2 NCB-PKG-02, Procurement of General Machineries NCB 186.40 1 NCB-PKG-01, Procurement of Milling Machineries NCB 196.00 NCB 180.00 POST 4 NCB-PKG-04, Procurement of CNC Machines NCB 220.00 POST 3 NCB-PKG-03, Procurement of Lathe Machines NCB 209.40 POST 6 NCB-PKG-06, Procurement of PLC System NCB 210.00 POST 5 NCB-PKG-05, Procurement of Hydraulic & Pneumatic Trainer Kits POST 7 NCB-PKG-07, Procurement of Welding Machines Page 2 APPRAISAL REVISED 1 4 5,8 11 ACTUAL APPRAISAL REVISED 1 4 5,8 11 ACTUAL APPRAISAL REVISED 1 4 5,8 11 ACTUAL APPRAISAL REVISED 1 4 5,8 11 ACTUAL APPRAISAL REVISED 1 4 5,8 11 ACTUAL APPRAISAL REVISED 1 4 5,8 11 ACTUAL APPRAISAL REVISED ACTUAL For Procurement Schedule refer to List of Tools & Equipments NCB 213.68 8 NCB-PKG-08, Procurement of General Machines NCB 210.20 POST NCB 98.73 POST 10 NCB-PKG-10, Procurement of Air Condition Equipments NCB 147.80 POST 9 NCB-PKG-09, Procurement of General Welding Machines NCB 183.37 POST 12 NCB-PKG-12, Procurement of Electronic Eqvipments NCB 196.26 POST 11 NCB-PKG-11, Procurement of Automobile Eqvipments POST 14 National Shopping for Small Tools & Equipments Total 44 Packages(Multiple packages each package not exceeding 46.00 Lakhs) NS 1378.90 POST 13 NCB-PKG-13, Procurement of Electronic Trainers & Eqvipments Page 3 APPRAISAL REVISED ACTUAL APPRAISAL REVISED ACTUAL 4120.02 1 INITIATE PREPARATION OF SPECIFICATIONS AND BID DOCUMENTS 9 INITIAL DELIVERY AT SITE 2 TRANSMIT SPECIFICATIONS AND BID DOCUMENTS TO IDA 10 INTERIM DELIVERY AT SITE 3 IDA CLEARANCE OF SPECIFICATION AND BID DOCUMENTS 11 FINAL DELIVERY AT SITE * = Amount contains for 24 No. of COE ITI's 4 ISSUE INVITATION TO BID 5 OPEN BIDS 6 TRANSMIT EVALUATION REPORT AND AWARD RECOMMENDATIONS TO IDA 7 IDA CLEARANCE OF RECOMMENDATIONS 8 AWARD CONTRACT *: Includes the TOTAL TIME PERIOD required to complete the procurement of all items under SHOPPING MODE by ALL ITI's #: Includes the TOTAL TIME PERIOD required to complete the procurement of all items under NCB MODE by ALL ITI's E: Equipment POST For Procurement Schedule refer to List of Tools & Equipments 15 National Shopping for UPS one Package (package not exceeding 46.00 Lakhs) National shopping under DGS&D 39.84 for Commissioner, Employment & Training. Draft approved by the commissioner) Joint Director(Trg) POST TOTAL Rs. Forty One Crore twenty lakhs and two thousand only. 16 National Shopping for Furnitures Total 13 Packages (Multiple packages each package not exceeding 23 Lakhs) NS 238.24 For Procurement Schedule refer to List of Tools & Equipments Page 4 Page 5 Page 6 Page 7 NCB's Sl No. NCB's Total Amount in Rupees 1 NCB-PKG-01 19600000 2 NCB-PKG-02 18640300 3 NCB-PKG-03 21120000 4 NCB-PKG-04 22000000 5 NCB-PKG-05 18000000 6 NCB-PKG-06 21000000 7 NCB-PKG-07 20940000 8 NCB-PKG-08 21020000 9 NCB-PKG-09 21368000 10 NCB-PKG-10 14780000 11 NCB-PKG-11 9873000 12 NCB-PKG-12 19626300 13 NCB-PKG-13 18336600 Total 246304200 Small Tools Sl No. National Shopping Tools & Equipments Total Amount in Rupees 1 NS-PKG-01 2850164 2 NS-PKG-02 2254975 3 NS-PKG-03 2278241 4 NS-PKG-04 3135971 5 NS-PKG-05 2420165 6 NS-PKG-06 2972035 7 NS-PKG-07 2549295 8 NS-PKG-08 2967208 9 NS-PKG-09 2913700 10 NS-PKG-10 3899000 11 NS-PKG-11 3609600 12 NS-PKG-12 3780480 13 NS-PKG-13 3935260 14 NS-PKG-14 3311200 15 NS-PKG-15 3775620 16 NS-PKG-16 3860000 17 NS-PKG-17 3885280 18 NS-PKG-18 3881150 19 NS-PKG-19 3663406 20 NS-PKG-20 3350946 21 NS-PKG-21 3003440 22 NS-PKG-22 2650000 23 NS-PKG-23 3774000 24 NS-PKG-24 3852400 ABSTRACT Page 8 25 NS-PKG-25 3814225 26 NS-PKG-26 3706296 27 NS-PKG-27 3775490 28 NS-PKG-28 3934000 29 NS-PKG-29 3747690 30 NS-PKG-30 3818000 31 NS-PKG-31 3606245 32 NS-PKG-32 3780000 33 NS-PKG-33 3292000 34 NS-PKG-34 3821800 35 NS-PKG-35 3160493 36 NS-PKG-36 3075330 37 NS-PKG-37 3113108 38 NS-PKG-38 3121744 39 NS-PKG-39 2824910 40 NS-PKG-40 2868100 41 NS-PKG-41 2961410 42 NS-PKG-42 1651520 43 NS-PKG-43 3227770 44 NS-PKG-44 3984000 45 NS-PKG-45 4000000 Total 141873667 Furnitures Sl No. National Shopping Furnitures Total Amount in Rupees 1 NS-FUR-PKG-01 2139600 2 NS-FUR-PKG-02 2117470 3 NS-FUR-PKG-03 2042600 4 NS-FUR-PKG-04 2025435 5 NS-FUR-PKG-05 1567800 6 NS-FUR-PKG-06 1860000 7 NS-FUR-PKG-07 1281480 8 NS-FUR-PKG-08 2012590 9 NS-FUR-PKG-09 1856000 10 NS-FUR-PKG-10 1932800 11 NS-FUR-PKG-11 1173600 12 NS-FUR-PKG-12 1955200 13 NS-FUR-PKG-13 1859600 Total 23824175 Grand Total 412002042 Draft approved by the commissioner) Joint Director(Trg) for Commissioner, Employment & Training Page 9 Page 10 Page 11 Page 12 Page 13 NCB- 01 SL. No. DGET SL. No. DESCRIPTION OF THE ITEMS Module Code QTY REQD AS PER DGET Total Qty Estimated Cost Per Unit Total Estimated Cost Consignee Govt I.T.I 1 64,72 Milling machine Horizontal table size 1100x225mm, longitudanal movement 450mm,cross traverse 180mm,vertical movement 275mm,spindle ISO40,spindle speeds 9, spindle speed max; 1200 rpm, spindle motor 2 hp,feed motor 1 hp, with swivel base bench vice 150mm, long arbours 16,22,27 and 32mm,machine lamp,coolant fittings,with instructional manual. ISO Approved PMBT-05,FBT-03 P&M-04 Nos, FAB-08 Nos 12 420000 5040000 KGF-01, Belgaum-01, Holenarasipura-01, Kanakapura-01, BT Centre,B-22-02, Devraysamudra-02, Kooknur-02, Nanjangud-02 2 63,71 Milling machine universal table size 1100x225mm, longitudanal movement 450mm,cross traverse 180mm,vertical movement 275mm,spindle ISO40,spindle speeds 9, spindle speed max; 1200 rpm, spindle motor 2 hp,feed motor 1 hp, with swivel base bench vice 150mm, long arbours 16,22,27 and 32mm,machine lamp,coolant fittings,with instructional manual. ISO Approved PMBT-05,FBT-03 P&M-04 Nos, FAB-08 Nos 12 420000 5040000 KGF-01, Belgaum-01, Holenarasipura-01, Kanakapura-01, BT Centre,B-22-02, Devraysamudra-02, Kooknur-02, Nanjangud-02 3 65 Milling machine vertical, table size 1100x225mm, longitudanal movement 450mm,cross traverse 180mm,vertical movement 275mm,spindle ISO40,spindle speeds 9, spindle speed max; 1200 rpm, spindle motor 2 hp,feed motor 1 hp, machine vice 150mm, collet adopters and collets (set of 5 nos.),rotary table 300mm with indexing attachment,,machine lamp,coolant fittings,with instructional manual. ISO Approved PMBT-05,FBT-03 P&M-04 Nos, FAB-08 Nos 12 420000 5040000 KGF-01, Belgaum-01, Holenarasipura-01, Kanakapura-01, BT Centre,B-22-02, Devraysamudra-02, Kooknur-02, Nanjangud-02 4 62,84,77,8 0 Universal testing machine Max capacity(tonne) UT-10 t Analog type or equalient with standard accessories ISO Approved FBT-05, FAT-01, 03,04 FAB-16 Nos 16 280000 4480000 BT Centre,B-22-04, Devraysamudra-04, Kooknur-04, Nanjangud-04 19600000 Draft approved by the commissioner) Joint Director(Trg) for Commissioner, SECTION - VI TECHNICAL SPECIFICATION Total Rs. One Crore Ninty Six Lakhs Only Package-1: Procurement list of Milling Machineries for Production and Manufacturing & Fabrication Sectors Page 14 Employment & Training Page 15 Page 16 Page 17 NCB-02 SL. No. DGET SL. No. DESCRIPTION OF THE ITEMS Module Code QTY REQD AS PER DGET Total Qty Estimated Cost Per Unit Total Estimated Cost 1 88,94 Nibbing machine appox no of stroke per min 1500,maximum tool lift 15mm, motor 3 HP or equalient With IS standard FBT-02, PMBT-02 P&M-04Nos, FAB-04Nos 8 570000 4560000 2 74,74,84 Radial drilling Machine with Tapping Attachment : Spcn.Drilling Cap. In Steel 25 mm , Tapping Cap.in steel M12 , Morse Taper in Spindle MT3, Spindle Travels 140 mm (App), No. of spindle speeds 6 (App), Spindle Speed upto 2600 rpm (App) , working area 240x180x180mm,with spindle drive motor 1hp,up and down movement motor 1hp, 3ph,with chuck coolant fittings, 150mm drilling vice with instructional manual. ISO approved. FBT-01,PMBT-01, ABT-01 P&M-04Nos, FAB-04Nos, Auto-01 No. 9 372000 3348000 3 56 Surface grinding machine with hydraulically operated longitudanal traverse reciprocating movement with wheel dia 180mm(or near) longitudinal table traverse 200mm (or near) fitted with adjustable traverse stop, magnetic chuck 200mm x 100mm. With diamond dresser tool holder ,hydraulic pump unit,coolant pump fittings with instructional manual. ISO approved. PMBT-04 P&M-04Nos 4 565000 2260000 4 90,84,81,6 7,90 Guiltotine shearing machine foot operated( 1 mt x22 g capacity) 4mm Cutting capacity(appox) mild steel with ( 2hp motor) HC shearing blade ,or equalient ISO approved. ABT-02, PMBT- 02,FBT-02 ,FAT- 01,FAT-04 P&M-04Nos, FAB-12Nos, Auto-01 No. 17 116000 1972000 5 67,68,70,70 Power hacksaw hydrulic auto feed max cutting dia of 200mm motor capacity of 3 HP APPOX With IS standard FBT-04, FAT- 01,03,04 FAB-16Nos 16 106000 1696000 SECTION - VI TECHNICAL SPECIFICATION Package-2: Procurement list of General Machineries for Production and Manufacturing , Fabrication, Automobile & RAC Sectors Page 18 6 89 Spinning lathe,Swing 22" appox motor 3 HP, with standard tools & acessories,or equalient FBT-02,PMBT-02 P&M-04Nos, FAB-04Nos 8 150000 1200000 7 102,102,96 Hand press brake capacity ( 0.8mm) ABT-02, PMBT-02, FBT-02 P&M-04Nos, FAB-04Nos, Auto-01 No. 9 122500 1102500 8 96,90 Seaming machine seaming dia upto 200mm ,sheet thickness 0.46mm motor 3 HP PMBT-02, FBT-02 P&M-04Nos, FAB-04Nos 8 86000 688000 9 103 Beading machine (with crimping rollers) any standard make PMBT-02 P&M-04Nos 4 151725 606900 10 100 Bending machine with 380mm throat clearance (withclamp rollers) FBT-02 FAB-04Nos 4 151725 606900 11 82,88 Slip roll former 1.6mmx1000mm FBT-02,PMBT-02, RACBT-01 P&M-04Nos, FAB-04Nos, RAC-02 NoS. 10 60000 600000 18640300 Draft approved by the commissioner) Joint Director(Trg) for Commissioner, Employment & Training Total Rs. One Crore Eighty Six Lakhs Forty Thousand Three Hundred Only Page 19 TOTAL NCB-F 168577500 CNC 22000000 H&P 21600000 PLC 35800000 RAC 11520000 AUTO 8735250 268232750 Page 20 Consignee Govt I.T.I KGF-01, Belgaum-01, Holenarasipura-01, Kanakapura-01, BT Centre,B-22-01, Devraysamudra-01, Kooknur-01, Nanjangud-01 KGF-01, Belgaum-01, Holenarasipura-01, Kanakapura-01, BT Centre,B-22-01, Devraysamudra-01, Kooknur-01, Nanjangud-01, Honnavara-01 KGF-01, Belgaum-01, Kanakapura-01, Holenarasipura-01 KGF-01, Belgaum-01, Holenarasipura-01, Kanakapura-01, BT Centre,B-22-03, Devraysamudra-03, Kooknur-03, Nanjangud-03, Honnavara-01 BT Centre,B-22-01, Devraysamudra-01, Kooknur-01, Nanjangud-01 Package-2: Procurement list of General Machineries for Production and Manufacturing , Fabrication, Automobile & RAC Sectors Page 21 KGF-01, Belgaum-01, Holenarasipura-01, Kanakapura-01, BT Centre,B-22-01, Devraysamudra-01, Kooknur-01, Nanjangud-01 KGF-01, Belgaum-01, Holenarasipura-01, Kanakapura-01, BT Centre,B-22-01, Devraysamudra-01, Kooknur-01, Nanjangud-01, Honnavara-01 KGF-01, Belgaum-01, Holenarasipura-01, Kanakapura-01, BT Centre,B-22-01, Devraysamudra-01, Kooknur-01, Nanjangud-01 KGF-01, Belgaum-01, Kanakapura-01, Holenarasipura-01 KGF-01, Belgaum-01, Kanakapura-01, Holenarasipura-01 KGF-01, Belgaum-01, Holenarasipura-01, Kanakapura-01, BT Centre,B-22-01, Devraysamudra-01, Kooknur-01, Nanjangud-01, Bidar- 01, Karwar-01 Joint Director(Trg) for Commissioner, Employment & Training Page 22 Page 23 Page 24 sd/- Joint Director(Trg) for Commissioner, Employment & Training. Page 25 Page 26 NCB-03 SL. No. DGET SL. No. DESCRIPTION OF THE ITEMS Module Code QTY REQD AS PER DGET Total Qty Estimate d Cost Per Unit Total Estimated Cost Consignee Govt I.T.I 1 54,91,87,89,6 9 Lathe all geared ,gap bed,height of centre 150mm,ABC 1500mm,with 3jaw and 4 jaw chucks,live and dead centres,coolant pump with fittings,face plate,driving plate,fixed and travel steadies,splash gaurd,4 way tool post,taper turning attachment,machine lamp with instructional manual, with set of 4 nos tool holders. PMBT-04,FAT- 01,03,04, FBT-03 P&M-16Nos, FAB-28Nos 44 480000 21120000 KGF-04, Belgaum-04, Holenarasipura-04, Kanakapura-04, BT Centre,B-22-07, Devraysamudra-07, Kooknur-07, Nanjangud-07 21120000 Draft approved by the commissioner) Joint Director(Trg) for Commissioner, Employment & Training SECTION - VI TECHNICAL SPECIFICATION Total Rs. Two Crore Eleven Lakhs Twenty Thousand Only Package-3: Procurement list of Lathe Machines for Production and Manufacturing & Fabrication Sectors Page 27 sd/- Joint Director(Trg) for Commissioner, Employment & Training. Page 28 NCB-04 SL. NO. DGET SL. NO. DESCRIPTION OF THE ITEMS Module Code QTY REQD AS PER DGET Estimat ed Cost Per Unit Total Estimated Cost Consignee Govt I.T.I CNC 2 axes Turning centre with FanucOi-Male tc/Siemens Sinumerik 802D CNCsystem & with required cutting tools and Tooling package installation & Commissioning (Capacity intermediate Production Machines) with following Specfications: CAPACITY Maximum turning diameter (Chucking) 200mm; Maximun turning length 400mm, MAIN SPINDLE, Speed range : 3000 r.p.m ; Spindle nose : A2-5, Chuck size : 200mm; Spindle motor power : 5.5 kW cont., AXES SLIDES, X Axis stroke : 140mm; Z Axix stroke : 400mm Feed rate :1-5000 mm/minute; Rapid traverse rate X & Z : 10 meters/minute, TAIL STOCK Quill diameter/stroke : 70/100 mm; Taper in quill : MT 3, TURRET No.of stations : 8; Maximum borig bar dia: 32 mm, Tool cross section : 20x20 mm, With all other salient feautres like LM/ Hardened Guide ways, Accuracies as per JIS standards, Isolation transformer & Voltage Stabiliser. Slant bed Along with CNC Turning Training Simulation software - Keller make, 1. PC windows based system for Vocational Training in CNC Technology for theory and practice, 2. Compatible to Fanuc/Siemens SECTION - VI TECHNICAL SPECIFICATION KGF  B   Package-4: Procurement list of CNC Machines for Production and Manufacturing Sector Page 29 3. Simulation Software on CD with on-site licence for Turning applications, 4. Turning Module - 8 Licences Cutting tool and tooling package : 1. Turning tool holder ( roughing tool) - 01 no 2. Turning inserts for the above tool holder – 10 nos 3. Turning tool holder ( finishing tool) - 01 no 4. Turning inserts for the above tool holder – 10 nos 5. Under cutting tool holder - 01 no 6. under cutting inserts for the above tool holder – 10 no 7. Threading tool holder LH & RH – 02 nos 8. Threading tool inserts for the above tool holder – 20 no 9. Boring tool holder Dia 12 mm , 16 mm , 20 mm , 32 mm – each 01 no 10. Boring tool inserts for the above tool holder – 10 nos each 11. Internal threading tool holder LH & RH – 02 nos 12. Threading inserts for the above tool holder – 10 nos 13. Drill chuck with arbor 0-12mm – 01 no TAIL STOCK – Suitable Revolving center to be supplied Simulation PC – Suitable Locked type PC Stand ISO approved. 4Nos. K   H 1 1 2650000 10600000 PMAT-01 Page 30 CNC 3 axes Vertrical machining centre Fanuac 0i-Mate /Siemens Sinumerik 802D CNC system & with required cutting tools and Tooling package Installation & Commissioning hydrulic vice, maintenance kit, SPECIFICATIONS AS FOLLOWS; TABLE SIZE Clamping surface : 600x400mm, WORKING RANGE: Longitutinal table travel X-Axis : 400 mm; Y Axis : 400 mm; Z Axis : 400 mm SPINDLE Type and nose taper : BT-40 ; Power : 3.75 kW cont ; Speed : RPM : 60-4000 AUTOMATIC TOOL CHANGER Tools capacity : 12 ; Max tool dia/length : 80/200 mm, Feed rate : 1-6,000 mm/minute ; Rapid traverse : 20/20/20 meters/min, CONTROL SYSTEM CNC system : Fanuc 0i Mate/Siemens 802D ; ACCURACY (as per JIS Standards) Along with CNC Milling Training Simulation software - Keller make, 1. PC windows based system for Vocational Training in CNC Technology for theory and practice, 2. Compatible to Fanuc/Siemens, 3. Simulation Software on CD with on-site licence for Milling applications, 4. Milling Module - 8 Licences Cutting tool and tooling package : 1. Plain Milling cutter with key Dia 80 mm with arbor – 01 no 2. Suitable inserts for the above cutter– 10 nos 3. Milling adaptor with C Spanner 25 ERSR - 02 no 4. Milling adaptor with C Spanner 32 ERSR - 02 no 5. Milling collets 25 ERBR-7 of different Sizes 4, 6,8,10,12,14 , 16 - 01 no each 6. Milling collet 32 ERBR -7 of different size 18,20,22 – 01 no each 7. Carbide end mill cutters 4,6,8,10,12,14,16,18,20,22 mm – 02 nos each 8. Hydraulic vice with maintenance kit 100mm size – 01 no 9. Simulation PC – Suitable Locked type PC Stand 22000000 Draft approved by the commissioner) Joint Director(Trg) for Commissioner, Employment & Training 2850000 11400000 Total Rs.Two Crore Twenty Lakhs Only 3 2 PMAT-01 KGF  B   K   H 4Nos. Page 31 Page 32 Page 33 Page 34 sd/- for Commissioner, Employment & Training. Employment & Training. Joint Director(Trg) Page 35 Page 36 Page 37 Page 38 Page 39 Page 40 NCB-05 SL. NO. DGE T SL. NO. DESCRIPTION OF THE ITEMS Module Code QTY REQD AS PER DGET Estimated Cost Per Unit TOTAL Estimated Cost Consignee Govt I.T.I Hydraulic Trainer kit 1. Trolley with frame ( profile plate ) – No of wheels 04 ,two fixed & two swivel type ,load mounting capacity : 500kgs 2. Hydraulic power pack – operating pressure 40 bar ,Flow rate 5LPM ,tank capacity 50 liters , Suitable pump & electric motor coupled with bell housing and mounted externally over the tank with vibro mounts , Safety relief valve with variable setting, accessories like Drain plug, suction strainer Return line filter ,valve mounting sub plates , hydraulic fittings , required quantity ( min 8 nos ) of hydraulic hoses of suitable length with end fittings and quick couplings , transparent hoses on return lines and leakage lines, Detailed instruction manual 3. pressure gauge (glycerin filled ) 04 nos of suitable range to measure the pressure at various points ( pressure line , return line reduced pressure line , suction line ) 4. one way Flow control valve – 01 no 5. Shut off valve – 01 no 6. Non return valve – 01 nos 7. Pressure relief valve piloted – 01 no 8. Sequence valve -01 no 9. pressure reducing valve – 01 no 10. 2 way flow control valve – 01 no 11. Single acting cylinder – spring return type – bore 20 mm rod dia 12 mm , stroke 200 mm 12. Double acting cylinder bore 20 mm rod dia 12 mm ,stroke – 200mm 13. Diaphragm Accumulator with shutoff block 14. 4/2 way hand lever valve – 01 no 15. 4/3 way hand lever valve – 0 no 16. Tee connectors – 10 nos 17. operation and maintenance manual – 02 hard copies and one soft copy 18. Work Book - 01 No. 19. Video - 1 No. 20. Magnetic Symbols- 1 Set. 21. Transparencies - 01 Set 18. Work Book - 01 No. 19. Video - 1 No. 20. Magnetic Symbols- 1 Set. 21. Transparencies - 01 Set 22. Text Book Basic - 01 No. 23. Work Book Basic - 01 No. ISO APPROVED 2300000 9200000 8 SECTION - VI TECHNICAL SPECIFICATION Package-5: Procurement list of Hydraulic & Pneumatic Trainer Kits for Production and Manufacturing Sector PMBT-06 8 set KGF-02, Belgaum-02, Kanakapura-02, Holenarasipura- 02 1 Page 41 Pneumatic Trainer kit - 1. work station - 01 no 2. profile plate with stand – with 04 wheels two fixed & two swivel type ,load mounting capacity : 500kgs 3. Air compressor – Displacement 5 cfm , working pressure – 7 bar with 1 hp 1440 electric motor 3phase with 0-10 bar pressure gauge and shutoff valve with suitable hose and end connector 4. Filter regulator and lubricator unit with pressure gauge 10 bar – 01 no 5. 2/2 way panel mounted DC Valve NC assy ,1/4” BSP – 01 no 6. 3/2 way panel mounted DC Valve NC assy ,1/4” BSP – 01 no 7. 5/2 way panel mounted DC Valve NC assy ,1/4” BSP – 01 no 8. 5/3 way panel mounted DC Valve NC assey ,1/4” BSP – 01 no 9. Quick Exhaust valve assy – 02 no 10. 3/2 way roller lever vale NC assy – 02 no 11. 5/2 way pilot actuated valve – 01 no 12. 3/2 way pilot actuated valve – 01 no 13. 5/2 way detent valve – 01 no 14. Shuttle valve – 02 no 15. Two pressure valve – 02 nos 16. flow control valve – 02 nos 17. 2/2 way push button actuation DC Valve NC assy ,1/4” BSP – 01 no 18. 3/2 way push button actuation DC Valve NC assy ,1/4” BSP – 01 no 19. 5/2 way push button actuation DC Valve NC assy ,1/4” BSP – 01 no 24. Video - 1 No. 25. Magnetic Symbols- 1 Set. 26. Transparencies - 01 Set 27. Text Book Basic - 01 No. 28. Work Book Basic - 01 No. ISO APPROVED 18000000 Draft approved by the commissioner) Joint Director(Trg) for Commissioner, Employment & Training 1100000 2 7 PMBT-06 8 set Total Rs. One Crore Eighty Lakhs Only KGF-02, Belgaum-02, Kanakapura-02, Holenarasipura- 02 8800000 Page 42 Page 43 Employment & Training. Employment & Training. Page 44 Page 45 sd/- Joint Director(Trg) for Commissioner, Employment & Training. Employment & Training. Page 46 NCB-06 SL. NO. DGET SL. NO. DESCRIPTION OF THE ITEMS Module Code QTY REQD AS PER DGET Estimated Cost Per Unit Electro-Hydraulic trainer kit ( Non Transparent) Electro Hydraulic Trainer Kit: The Electro Hydraulic Training Kit shall be capable of being used to demonstrate the design, construction and application of Electro Hydraulic components and circuits. The kit should be designed to satisfy the following objectives: • Design and function of a Electro Hydraulic System – Basic • Design and Function of Valves • Symbols in accordance to ISO 1219 • Basic Electro Hydraulic Circuit Diagrams on practical applications • To provide a modern trainer with blended learning components which allows improved student performance in practical situations • To empower students to design their own circuits using state of the art software based tools The components shall be capable of being mounted on an appropriate profile plate with grooves for secure and flexible positioning so that the components can be clamped firmly, quickly & safely through quick fix adapters. This should ensure flexibility in conducting experiments through varies exercises. All Hydraulic connections shall be with self-closing, quick connector, safety clamping and quick plug in locking system for profile panels (unless specified against individual item). The couplings should be leak proof, which is self-sealing when decoupled and when coupled, should ensure a tight hydraulic connection. During the coupling process only the face of the coupling should be coated with oil. Industrial components shall be used in the kit so that the students get hands on practical training in using Industrial components. The kit shall be modular and upgradeable so that future investments to higher levels of training are reduced. The operating pressures in general shall be as given below unless otherwise specified against individual item: 1. Operation Pressure P : 6 MPa ( 60 Bar) 2. Max. Permissible pressure Pmax : 12 Mpa (120 Bar) The kit shall contain components as per the attached list. SECTION - VI TECHNICAL SPECIFICATION Package-6: Procurement list of Electro Hydraulic & Pneumatic Trainer kit with PLC System for Production and Manufacturing Sector Page 47 1. Profile Plate All of the components fit securely and safely onto the profile plate. Both sides have s have grooves and, if required, both sides can be used. The grooves are compatible with the profile system. Side caps are included. Grid dimensions _____________________ 50 mm Size _____________________________ ___ 1100 x 700 mm All of the components can be flexibly positioned and securely mounted in the profile slot using T-slot nuts. Components can be mounted on the profile plate with millimeter accuracy. The extensive profile plate permits systematic arrangement of the components in accordance with the circuit diagram, for example, to make the transfer of information from the drawing to the actual system as easy as possible for the participants. The profile plate should be mounted on a mobile Aluminum workstation with wooden lockable storage cabinets. It should have facility to mount the PC, UPS and LCD monitor. 2. Hydraulic Power Pack- 1 No The power pack is of the external gear pump type with a single pump. The motor with the hydraulic power pack is AC, single phase, 230 V, 0.65 W power rating, frequency 50 Hz, actuation is manual via ON/OFF switch, the delivery rate at nominal speed is 2.2 lpm at 1320 min-1, operating pressure is 6 Mpa (60 Bar), oil tank capacity is 5 liters, duty cycle is 50%, dimensions are 580 x 300 x 180 mm. 3. Double-acting cylinder – 2 Nos Double-acting cylinder is with control cam and two barbed fittings Piston diameter ______________________ 16 mm [ Piston rod diameter ___________________ 10 mm, with M8 thread Stroke ______________________________ 200 mm Operating pressure p __________________ 6 MPa (60 bar) Max. permissible pressure pmax __________ 12 MPa (120 bar) 4. 4/2-way hand lever valve- 2 Nos Operating pressure p __________________ 6 MPa (60 bar) Max. permissible pressure pmax __________ 12 MPa (120 bar) Actuation ___________________________ Manual Page 48 Operating pressure p___________ 6 Mpa (60 bar) Max. permissible pressure Pmax__ 12 Mpa (120 bar) Actuation____________________ Manual 6. Pressure relief valve - 1 No The valve is capable of being used as a pressure relief valve if port T is connected to the tank and as a pressure sequence valve if port T is connected to another power component, such as a cylinder. Operating pressure p __________________ 6 MPa (60 bar) Max. permissible pressure pmax __________ 12 MPa (120 bar) Adjustment __________________________ Manual Actuation ___________________________ Hydraulic 7. One way flow control valve - 2 Nos Nominal Flow rate___________ 9 l/min Operating pressure__________ 6 MPa (60 bar) Max permissible pressure______12 MPa (120 bar) Actuation___________________ Manual 8. Non-return valves - 2 Nos Operating pressure p __________________ 6 MPa (60 bar) Max. permissible pressure pmax __________ 12 MPa (120 bar) Actuation ___________________________ Hydraulic Opening pressure of one valve _____________________ 0.1 MPa (1bar) Opening pressure of other valve_____________________ 0.5 MPa (5 bar) 9. Standard hoses with quick connectors The high-pressure hose is made of three layers. The innermost layer is of Synthetic rubber, followed by a wire mesh and sheath of abrasion-resistant synthetic rubber. The two coupling sockets are self-sealing when decoupled. When used with a coupling nipple, the coupling sockets form a highly sealed connection. The arrangement is such that only when the hoses are unpressurized, coupling and decoupling is possible. Nominal size _________________________ 6 mm Operating pressure p ________________ 6 MPa (60 bar) Max. permissible pressure pmax_______ 12 MPa (120 bar) Temperature range__________________ -40 – +125 °C Bending radius, minimal _____________ 100 mm Hose length _________________________ 600 mm Hose length _________________________ 1000 mm Hose length _________________________ 1500 mm PMAT-03 1250000 8 sets Page 49 The appropriate no. of hoses/hose lengths as per the above specifications are quoted. 10. Tee Connector: Branch Tee with three connections (1 socket, 2 nipples).The branch tee can be inserted at any point to create a branch. Operating pressure : 6 MPa (60 bar) Max.permissible pressure Pmax : _____ 12 MPa (120 bar) 11. Hydraulic distributor plate: - 1 No The hydraulic distributor plate accommodates 5 P or T outlets. The distributor plate is also equipped with a pressure gauge. The distributor plate is firmly mounted on the profile plate. Measurement range___________ 0-10 MPa (0-100 bar) Accuracy____________________ 1.6% of full-scale value Operating pressure, static_______ Ύ of full-scale value Operating pressure, dynamic_____ 2/3 of full-scale value Actuation_____________________ Hydraulic 12. Hydraulic Oil (HLP 22): This is to DIN 51524 standards. This shall be supplied in a 20 litre can. 13. Drip Tray: The drip tray being supplied shall be made of steel. 14. Profile plate frame for inclined profile plate mount: 2 per profile plate to be supplied & shall be with mounting parts. 15. Mounting Profile: Required when the weight is to be mounted directly on the hydraulic cylinder. Scope of delivery includes connecting kit. Profile dimensions________ 32 x 32 x 816 mm 16. 2 way Flow Control valve - 2 Nos Operating pressure p __________________ 6 MPa (60 bar) Max. permissible pressure pmax __________ 12 MPa (120 bar) Adjustment____________________________ Manual Actuation ___________________________ Hydraulic Page 50 17. Shut-off valve - 2 Nos Shut-off valve is with two ports. The valve is capable of being inserted at any point to enable shutoff of flow. Operating pressure p __________________ 6 MPa (60 bar) Max. permissible pressure pmax __________ 12 MPa (120 bar) Actuation ___________________________ Manual 18. Weight - 1 No The weight is for loading of the cylinder and can simulate a driving or tractive load. The weight is capable of being used vertically with a double-acting cylinder. A cover for safety is included in the scope of supply. All the necessary accessories for using the weight with the cylinder should be supplied. Mass _______________________________ 9 kg Dimensions, L x W x H _________________ 150 x 100 x 80 mm 19. Pressure gauge - 1 No The pressure gauge is protected by a glycerin filling against pressure peaks, condensed water and the ingress of water during cleaning. Measurement range __________________ 0 – 10 MPa (0 – 100 bar) Accuracy ____________________________ 1.6 % of full-scale value Operating pressure, static _____________ 3/4 of full-scale value Operating pressure, dynamic _________ 2/3 of full-scale value Page 51 Power rating 6,5 W Operating pressure p 6 MPa (60 bar) Max. permissible pressure pmax 12 MPa (120 bar) Actuation Electrical 23. 4/3-way solenoid valve Power rating _________________________ 6, 5 W Operating pressure p _________________ 6 MPa (60 bar) Max. permissible pressure pmax _______ 12 MPa (120 bar) Actuation __________________________ _ Electrical 24. 24 V DC regulated power supply for the above kit - 1 No Input voltage ________________________ 230/115 V AC (47 – 63 Hz) Output voltage _______________________ 24 V DC, short-circuit-proof Output current _______________________ Maximum 4.5 A Connection cable _____________________ 1.3 m Dimensions__________________________ 115 x 155 x 200 mm I/O Box - 2 Nos Inputs 3 safety sockets each for 8 three-wire sensors Outputs 2 safety sockets each for 8 actuators Interfaces ___________ 4 mm safety sockets for 24 V DC, SysLink connector I/O status display via LEDs 25. Relay - 2 Nos The device has three relays with terminals and two buses for power supply. Contact set __________________________ 4 changeover switches Contact load _________________________ Maximum 5 A Cut-off load__________________________ Maximum 90 W Pick-up time _________________________ 10 ms Drop-off time ________________________ 8 ms 26. Indicator unit and distributor, electrical - 2 Nos The device contains an acoustic indicator and four lamps with terminals and three buses for power supply. Through contact socket pairs per lamp it also allows the element to also be used as a distributor. Power consumption acoustic indicator____ 0.04 W Power consumption indicator lamps______ 1.2 W Page 52 Frequency acoustic indicator____________ 420 Hz 27. Limit switch, electrical, left actuated - 4 Nos The electrical limit switch comprises of a mechanically operated micro switch. When the roller lever is pressed by the control cam of a cylinder, the micro switch is actuated. The circuit is capable of being closed or opened via the contacts. The micro switch is capable of being wired as a normally open, normally closed or changeover contact. Contact load _________________________ Maximum 5 A Switching frequency___________________ Maximum 200 Hz Reproducible accuracy_________________ 0.2 mm Switch travel_________________________ 2.7 mm Actuator force________________________ 5 N 28. Limit switch, electrical, right actuated - 2 Nos The electrical limit switch comprises of a mechanically operated micro switch. When the roller lever is pressed by the control cam of a cylinder, the micro switch is actuated. The circuit is capable of being closed or opened via the contacts. The micro switch is capable of being wired as a normally open, normally closed or changeover contact. Contact load _______________________ Maximum 5 A Switching frequency_________________ Maximum 200 Hz Reproducible accuracy______________ 0.2 mm Switch travel_________________________ 2.7 mm 29. Signal Input, electrical: - 1 No The device shall contain a release – delay and a pickup-delay time relay. Both relays are infinitely variable, using the rotary knob of the potentiometer. Contact set____________ 2 makes, 2 breaks Contact load___________ Maximum 5 A Cut-off load____________ Maximum 100 W Delay_________________0.5 – 10 s adjustable Page 53 30. Set of Cables: Color Quantity Length (mm) Red 1 1500 Red 3 1000 Red 21 500 Red 26 300 Red 10 50 Red 1 1500 Red 3 1000 Red 12 500 Red 11 300 Red 10 50 31. Plug in adapters: For mounting of components with plug-in foot on the aluminum profile plate 32. Pressure Relief Unit: The pressure relief unit allows you to remove hydraulic clamping pressures without great expenditure of force. 30. Set of Cables: Color Quantity Length (mm) Red 1 1500 Red 3 1000 Red 21 500 Red 26 300 Page 54 Red 10 50 Red 1 1500 Red 3 1000 Red 12 500 Red 11 300 Red 10 50 31. Plug in adapters: For mounting of components with plug-in foot on the aluminum profile plate 32. Pressure Relief Unit: The pressure relief unit allows you to remove hydraulic clamping pressures without great expenditure of force. The Above Electro Hydraulic Trainer kit should be Interfaced with suitable PLC System along with Software. The PLC System should consits of the following min. Specification. Specifications :- The kit is mounted on powder coated trainer kit with suitable arrangement for input and output switches & LEO’s & Pot for PLC system :- a) PLC System for experimentation with load power supply, including installation wiring of modules b) CPU 313-DP ; c) MMC-64KB Back-up Battery ; d) Communication cable for programming e)Battery Backup for CPU f) Manual for PLC g) Software, Starter, Off line package with hard lock activation, h)Bus connector ; i) Front connector j) Power supply- I/P 230V AC ; O/P 24 VDC /2 Amp; k) Front connector ; l) PC - Adapter. with license software m) Nessory slot fillers for empty slots. n) 4 to 20MA/0-1-V power supply with digital indicator. Necessary pot + Digital Display for display output and input Page 55 Electro - Pneumatic Trainer kit ( Non Transparent) Features : - The Electro Pneumatic Training Kit (Basic Level) shall be capable of being used to demonstrate the design, construction and application of Electro Pneumatic components and circuits. This kit shall upgrade from the Basic level kit. The kit should be designed to satisfy the following objectives: • Design and function of a Electro Pneumatic system – Basic • Function and identification of Electro-pneumatic components and their symbols • Direct and indirect manual controls, stroke dependant controls, time dependant with time delay valves and pressure dependant controls with pressure sequence valves. • Logic AND / OR function to start signals • Application and fault findings of Electro Pneumatic controls • Functional diagrams • Systematic design of Electro Pneumatic Sequence Controls • Methods for the drafting of circuit diagrams for Electro Pneumatic controls • Pneumatic Power Section – Electric Control Section • To provide a modern trainer with components which allows improved student performance in practical situations • To empower students to design their own circuits.. The components shall be capable of being mounted on an appropriate profile plate with grooves for secure and flexible positioning so that the components can be clamped firmly, quickly & safely through quick fix adapters or any suitable component fixing arrangement. This should ensure flexibility in conducting experiments through varies exercises. Pneumatic Plug in type flexible connectors should be safe & airtight, usage for multiple applications. These should be with precision quick connector for plastic tubing 4 mm x 0.75 and for internal or external diameter calibrated tubes. (Unless specified against individual item) Multifunctional electro – connectors for 4 mm laboratory plugs and jack plugs Industrial components shall be used in the kit so that the students get hands on practical training in using Industrial components. Page 56 The kit shall be modular and upgradeable The kit shall contain components as per the attached list. 1. Profile Plates & Stand: The anodized aluminum profile plate or power coated profile plate is the basis for training. All of the components fit securely and safely onto the profile plate. with any safe fixing arrangement Grid dimensions 50 mm Size ________________________________ 1100 x 700 mm approx. All of the components can be flexibly positioned and securely mounted in the profile slot using T-slot nuts or Quick-Fix. Components can be mounted on the profile plate with any suitable fixing arrangement 2. Shuttle valve (OR) assy.: - 1 No The shuttle valve is switched through to the output by applying compressed air to one of the inputs (OR function). Design type is OR gate (shuttle valve) Pressure range _______________________ (1 – 10 bar) 3. Dual-pressure valve (AND): - 1 No The dual-pressure valve is switched through to the output by applying compressed air to both of the inputs (AND function). Design type is AND gate (dual-pressure valve) Pressure range _______________________ (1 – 10 bar) 4. One-way flow control valve assy.: - 2 Nos The one-way flow control valve is a combination of flow control valve and a non-return valve. The cross-section of the restrictor can be set by means of a knurled screw. Design type is Combined flow control valve Pressure range _______________________ (0.5 – 10 bar) 5. Pressure sequence valve assy.: - 2 Nos The pressure of the control signal can be set by means of the pressure setting screw (variable). Design type is Poppet valve with return spring Operating pressure range ______________ (1.8 – 8 bar) Control pressure range ________________ (1 – 8 bar) Page 57 6. Single-acting cylinder assy.: - 2 Nos Design type is Piston cylinder Operating pressure ___________________ 10 bar Stroke length ________________________ Maximum 100 mm 7. Double-acting cylinder assy.: - 2 Nos Design______________________________ Piston cylinder Operating pressure ___________________ (10 bar) Stroke length ________________________ Maximum 100 mm 8. Manifold assy.: - 1 No Manifold with six (2 x 3) self-closing non-return valves or the connections with gate valve A common manifold for plastic tubing allows supply of compressed air to the control via six Individual ports (for plastic tubing PUN 4 x 0.75). 9. Filter regulator with gauge assy. - 1 No Filter control valve with pressure gauge, start-up valve, quick push-pull connectors and quick couplings, mounted on a swivel support. The filter with water separator removes dirt, pipe sinter, rust and condensed water. The pressure control valve regulates the supply air pressure to the set operating pressure and compensates pressure fluctuations. The filter bowl has a condensate drain valve. The start-up valve/shutoff valve ventilates and vents the entire control. The 3/2 way valve is actuated by a rotary button. Design Sintered filter Nominal flow rate 750 l/min Input pressure Maximum (16 bar) Output pressure Maximum (12 bar) Grade of filtration 40 ΅m approx. Connector G 1/8, / PU 6 PMAT-03 1250000 8 sets Page 58 10. Relay, three fold: - 4 Nos The device has three relays with terminals and two buses for power supply. Contact set 4 change – over switches Contact load maximum 5 A 11. Signal Input, electrical: -4 Nos The device contains an illuminated pushbutton switch (control switch) and two illuminated pushbuttons (momentary contact switches) with terminals and two buses for power supply. Contact set 2 makes, 2 breaks Contact load Maximum 1 A 12. Indicator unit & distributor, electrical: - 2 Nos The device contains an acoustic indicator and four lamps with terminals and three buses for power supply. Through-contact socket pairs per lamp allow the element to also be used as a distributor. 13. Proximity Switch, electronic with attachment: - 3 Nos The proximity switch consists of a sensor, the mounting kit and the cable. This proximity switch gives a signal when it detects a magnetic field. The status is indicated by an LED. Switching voltage 10 – 30 VDC Switching current Maximum 200 mA Switching power 6 W approx. Switch accuracy ± 0.1 mm 14. 3/2 Solenoid valve, Single, with LED, NC: - 2 Nos The status is indicated by an LED on the housing. The valve is equipped with a manual override. The electrical connections feature polarity-reversal protection for the LED and the suppressor circuit. with silencer and push pull connector Pneumatic technical data : Design type is spool valve, pilot controlled, with return spring Pressure range 250 – 800 kPa (2.5 – 8 bar) Electrical technical data : Power consumption 1.5 W Page 59 15. 5/2 way Single solenoid valve with LED - 2 Nos The status is indicated by an LED on the housing. The valve is equipped with a manual override. The electrical connections feature polarity – reversal protection for the LED and the suppressor circuit. with silencer and push pull connector Pneumatic technical data : Design type is spool valve, pilot controlled, with silencer and push pull connector Pressure range 250 – 800 kPa (2.5 – 8 bar) Electrical technical data : Power consumption 1.5 W 16. 5/2 Solenoid valve, double, with LED: - 2 Nos The statuses are indicated by LEDs on the housings. The valve is equipped with two manual overrides. The electrical connections feature polarity – reversal protection for the LEDs and the suppressor circuits. with silencer and push pull connector Pneumatic technical data : Design spool valve, with pilot control Pressure range 150 – 800 kPa (1.5 – 8 bar) Electrical technical data : Power consumption 1.5 W 17. Pneumatic – Electrical converter: - 1 No The pneumatic-electrical converter can fulfill 3 functions : Pressure switch, vacuum switch, and differential pressure switch. Pneumatic technical data : Design Pre stressed metal bellows initiator Pressure Ranges : Pressure switch, connector P1 25 - 800 kPa (0.25 - 8 bar) Vacuum switch, connector P2 -25 – -80 kPa (-0.2 – -0.8 bar) Differential pressure switch : Connectors P1….P2 -95 – 800 kPa (-0.95 – 8 bar) Hysteresis maximum 25 kPa (0.25 bar) Electrical technical data : Switching current 400 mA Page 60 18. Limit Switch, left actuated: - 4 Nos The electrical limit switch comprises a mechanically operated micro switch. When the roller lever is pressed, for example by the control cam of a cylinder, the micro switch is actuated. The circuit is closed or closed or opened via the contacts. The micro switch can be wired as a normally-open, normally closed, or changeover contact. Contact load Maximum 5 A Switching frequency Maximum 200 Hz Reproducible accuracy 0.2 mm Switch travel 2.7 mm Actuator force 5 N 19. Limit Switch, right actuated: - 4 Nos The electrical limit switch comprises a mechanically operated micro switch. When the roller lever is pressed, for example by the control cam of a cylinder, the micro switch is actuated. The circuit is closed or opened via the contacts. The micro switch can be wired as a normally—open, normally-closed or changeover contact. Contact load Maximum 5 A Switching frequency Maximum 200 Hz Reproducible accuracy 0.2 mm Switch travel 2.7 mm Actuator force 5 N 20. Equipment Tray: - 1 No Plastic tray with matching slot for placing of the components to be supplied with the electro pneumatic supplementary kit. 21. Power Supply Unit: - 1 No Input voltage 230/115 V AC (47-63 Hz) Output voltage 24 V AC, short-circuit-proof Output current Maximum 4.5 A Connection cable 3 m 22. Plug in adapter: For mounting of components with plug-in foot on the aluminum profile plate. or powder coated plate Page 61 23. Set of moulded Cables: Color Quantity Approx. min. Length (mm) Red 5 1500 Red 5 1000 Red 25 500 Red 25 300 Red 10 50 Blue 5 1500 Blue 5 1000 Blue 10 500 Blue 10 300 Blue 10 50 24. Quick Push Pull connectors: Sufficient shall be supplied for branching of the tubing for making of the circuitry. 25. Plastic tubing: PUN 4 x 0.75 Exterior diameter _____________________ 4 mm Interior diameter _____________________ 2.8 mm Metallic silver ________________________ 25 m Blue 25m 26. Connection component Set: Spare sets of these connection components shall be supplied. Note: The proper connection arrangement should be made for connections of valve to electrical signal by quick connection and release along with power supply input. Page 62 The Above Electro Pneumatic Trainer kit should be Interfaced with suitable PLC System along with Software . The PLC System should consits of the following min. Specification. Specifications :- The kit is mounted on powder coated trainer kit with suitable arrangement for input and output switches & LEO’s & Pot for PLC system :- a) PLC System for experimentation with load power supply, including installation wiring of modules b) CPU 313-DP ; c) MMC-64KB Back-up Battery ; d) Communication cable for programming e)Battery Backup for CPU f) Manual for PLC g) Software, Starter, Off line package with hard lock activation, h)Bus connector ; i) Front connector j) Power supply- I/P 230V AC ; O/P 24 VDC /2 Amp; k) DIN rail -482 mm; k) Front connector ; l) PC - Adapter. with license software m) Nessory slot fillers for empty slots. n) 4 to 20MA/0-1-V power supply with digital indicator. Necessary pot + Digital Display for display output and input WORKING MODEL OF HYDRAULIC PRESS FEATURES:- Operation: Foot switch for up-down operation with photo sensors for manual safety. Upper and lower limit safety switches. Glycerin filled pressure gauge & gauge isolator calibrated in tons Constructions: C-frame construction Anti rotation guide to top cylinder. Stress relieved structure with Epoxy paint. Make of components : All hydraulic components of reputed make like Yoken / Polyhydron/ Atoss/Vickers Motorised press of 10 ton TECHNICAL SPECIFICATION Capacity : 01 ton Size of table (Length X depth) : 500 x 350 mm Open height : 350 mm Stroke : 300 mm Gap : 500 mm Operation Speed : Up- 140 min/sec Down – 100 min/sec Pressing – 15 min/sec PMAT-03 4 sets 125000 Page 63 WORKING MODEL OF PNEUMATIC PRESS FEATURES:- Operation: Totally pneumatically controlled operated by two hand switches for safety. Fast and slow speed changeover. Construction: Four pillar structure with hardened and ground tie rods. Epoxy painted. Fitter, regulator and lubricator to be provide. Make of components: All pneumatic components of reputed makes like Festo/ SMC TECHNICAL SPECIFICATION - Day light Gap : 500 mm - Clear space between tie rods : 350 x 500 mm - Stroke of cylinder : 250 mm - Capacity : 1 ton PMAT-03 4 sets 125000 Draft approved by the commissioner) Joint Director(Trg) for Commissioner, T  R  T  C  T  L  O Employment & Training Page 64 Total Estimated Cost Consignee Govt I.T.I Package-6: Procurement list of Electro Hydraulic & Pneumatic Trainer kit with PLC System for Production and Manufacturing Sector Page 65 Page 66 10000000 KGF BELGM     Page 67 Page 68 Page 69 Page 70 Page 71 Page 72 Page 73 Page 74 Page 75 KGF BELGM     10000000 Page 76 Page 77 Page 78 Page 79 Page 80 500000 KGF BELGM     Page 81 500000 KGF BELGM     Joint Director(Trg) for Commissioner, Employment & Training Page 82 Page 83 Page 84 Page 85 Page 86 Page 87 Page 88 Page 89 Page 90 Page 91 Page 92 Page 93 Page 94 Page 95 Page 96 Page 97 Page 98 Page 99 Page 100 Page 101 Page 102 Page 103 Page 104 Page 105 Page 106 Page 107 Page 108 Page 109 Page 110 Page 111 Page 112 Page 113 Page 114 Page 115 Page 116 Page 117 sd/- Joint Director(Trg) for Commissioner, Employment & Training. Page 118 NCB-07 SL. No. DGET SL. No. DESCRIPTION OF THE ITEMS Module Code QTY REQD AS PER DGET Total Qty Estimate d Cost Per Unit Total Estimated Cost Consignee Govt I.T.I 1 80,78,81 Submerged Arc welding machine - 600 Amps,3 phase, cooling forced air with wire dia 2 to 5mm appox with hopper capacity appox 7 kgs ISO approved. FAT-01,03,04, FBT-04 FAB-12Nos 12 75000 900000 BT Centre,B-22-03, Devraysamudra-03, Kooknur-03, Nanjangud-03 2 58,57,58,62, 65 Arc welding set Rectifier type 400 Amp. With all accessories. ISO Approved FAT-01,03,04, FBT-04 FAB-36Nos 36 98000 3528000 BT Centre,B-22-06, Devraysamudra-06, Kooknur-06, Nanjangud-06 3 60,59,60 co2 welding machine complete set 400 amps with gas cooled goose necked torch 300A ISO Approved FAT-01-04 FAB-24Nos 24 344,000 8256000 BT Centre,B-22-04, Devraysamudra-04, Kooknur-04, Nanjangud-04 4 58,59,59 TIG welding set complete 300 amps AC/DC with water cooled torch ISO Approved FAT-03,04,01 FAB-24Nos 24 180000 4320000 BT Centre,B-22-04, Devraysamudra-04, Kooknur-04, Nanjangud-04 5 88,82,83 Air plasma cutting system with accessories & compressor 3 phase,air cooled ,to cut maxmimum thickness of 12mm ISO Approved FAT-01-03 FAB-12Nos 12 328000 3936000 BT Centre,B-22-03, Devraysamudra-03, Kooknur-03, Nanjangud-03 20940000 Draft approved by the commissioner) for Commissioner, Employment & Training. Total Rs. Two Crore Nine Lakhs Forty Thousand Only SECTION - VI TECHNICAL SPECIFICATION Package-7: Procurement list of Welding Machines for Fabrication Sector Joint Director(Trg) Page 119 NCB-08 SL. No. DGET SL. No. DESCRIPTION OF THE ITEMS Module Code QTY REQD AS PER DGET Total Qty Estimate d Cost Per Unit Total Estimated Cost Consignee Govt I.T.I 1 76,88,83,86 Fume extractor , 2000cfm/hr ,motor 1.5 hp , 3D arm movement about 1- 2 meter length ISO Approved FBT-4, FAT- 01,03,04 FAB-64Nos 64 280000 17920000 BT Centre,B-22-16, Devraysamudra-16, Kooknur-16, Nanjangud-16 2 57 Powder coating equipment complete with drying oven for about 25 to 50 kgs materials ISO approved. FBT-05 FAB-4Nos 4 500000 2000000 BT Centre,B-22-01, Devraysamudra-01, Kooknur-01, Nanjangud-01 3 78,75,78 Ultrasonic flaw detector ,frequency 0.5 -10 MHZ,Test range 0f Min 0-10, Max of 0-10 M ISO approved. FAT-01,03,04 FAB-12Nos 12 65000 780000 BT Centre,B-22-03, Devraysamudra-03, Kooknur-03, Nanjangud-03 4 81 Micro plasma welding machine - 25 amps • The machine is capable of welding metal sheet of capability from 10 microns to 3mm thickness ISO approved. FAT-01 FAB-04Nos 4 80000 320000 BT Centre,B-22-01, Devraysamudra-01, Kooknur-01, Nanjangud-01 21020000 Draft approved by the commissioner) for Commissioner, Employment & Training. Total Rs. Two Crore Ten lakhs twenty thousand only SECTION - VI TECHNICAL SPECIFICATION Package-8: Procurement list of General Machines for Fabrication Sectors Joint Director(Trg) Page 120 NCB-09 SL. No. DGET SL. No. DESCRIPTION OF THE ITEMS Module Code QTY REQD AS PER DGET Total Qty Estimated Cost Per Unit Total Estimated Cost Consignee Govt I.T.I 1 85,87,82,75 Fiber welding booth & welding screen 7 feet hight,breath 6x6 feet 5mm thickness ISO Approved FAT-01,03,04, FBT-04 FAB-128Nos 128 158000 20224000 BT Centre,B-22-32, Devraysamudra-32, Kooknur-32, Nanjangud-32 2 104,12,149,1 39,131,91,85 Oxy ­ acetylene welding set complete with cylinders, regulators welding torches with difference nozzles : Accessories : 1) Oxygen cylinder(industrial)- 1no. 2) Accetylene cylinder(industrial)- 1no. 3) Double stage oxygen regulator - 1 no. 4) Double stage Acetylene regulator - 1 no. 5) Welding torch - 1 no. 6) Different Nozzles 7) Hoses & fittings 8) Gloves, goggles, Aprons etc., 9) Cylinder keys - 2nos 10) Trolly for moving ISO approved. RACBT-I,4, RACAT- 01,03,02, ABT- 02,PMBT-02 P&M-08Nos, AUTO-02No, RAC-12 Nos. 22 52000 1144000 Honnavara-02, KGF- 02, Belgaum-02, Holenarasipura-02, Kanakapura-02, Bidar-06, Karwar-06 21368000 Draft approved by the commissioner) for Commissioner, Employment & Training. Total Rs. Two Crore Thirteen Lakhs Sixty Eight Thousand Only SECTION - VI TECHNICAL SPECIFICATION Package-9: Procurement list of General Welding Machines for Fabrication, Auto Mobile, RAC & Production & Manufacturing Sectors Joint Director(Trg) Page 121 NCB-10 Sl. No. DGET Sl. No. Names of the tools & Equipments Module Code QTY REQD AS PER DGET Estimat ed Cost Per Unit Total Estimated Cost Consignee Govt I.T.I 1 93,138 Package A/C 7.5 ton cap. With sealed double compressor system, water cooled shell and tube condenser and forced draft cooling tower, thermostatic expanssion valve control and liquid chilling(water cooled) Evaporator and 2 Nos Fan Coil units(FCU) for load distribution. Pumps required capacity for cooling tower & 2 FCU coil water supply. Complete with construction of pipe lines, Temp Controls, Humidity control, Accessories , Control pannel consist of all Electrical controls, Safety controls, Temperature indicator, Pressure gauges, Starters, Contractors, etc., with complete plant installation. RACBT-VI, RACAT-02 4 Nos. 680000 2720000 Karwar -02 , Bidar-02 2 94,137 Package A/C 3 ton Air cooled type , Single or Multi compressor 3 ton capacity Air cooled condenssor. Thermostatic Ex.Valve, Air Cooled Evaporator(Ductable unit) with 10" x 20", rectangle 25 feet length GI Duct Fabrication with insulation for air distribution. Duct along with supply out lets & Supply grill. Complete controls like Gauges, Thermostat, Humidistat, Electrical & Safety Controls RACBT-VI RACAT-02 4 Nos. 300000 1200000 Karwar -02 , Bidar-02 Cold storage plant complete with all controls & accessories including cooling tower & water treatment plant. Cold Room (Tutor) Construction : Approximate outside dimenssions about 2.15mtr length, 2 mtr breadth, 2,15mtr height. Inside volume about 5000 ltrs, chamber provided with 3" puf insulation all around with one door opening. Heater arrangement for door and light provision inside the chamber. Air cooling Evaporator coil and two nos of fans installed in the chamber for cooling. Shelves provission to be made for food storage temperature maintained about 2 to 4 o C. Condensing Unit: Consist of 15000 K-cal/hr (5 ton) capacity, Open type compressor with fly wheel. Aditional prime mover motor required capacity to drive compressor with pulley & belt drive. Water cooled shell and tube condenser with induced draft cooling tower construction. Pump and pipe lines arrangement for carrying water, provision of receiver for refrigerant storage . Expansion Valve : Thermostatic or Automatic Control Pannel : Consist of Thermostat, Humidistat, Pressurestat, Temp. Indicator, Electrical controls. Safety controls, scanner, starter, voltmeter, Ammeter & Other controls. 4 85,128 Air conditioning, direct & indirect water chiller. Complete with all controls including humidity control & electrical controls, 5 ton (15000 kcal/hr.) capactiy. Open type compressor and Aditional required capacity Motor to drive compressor. Fly wheel , pulley and belt arrangement with Air cooled condensing unit. Two Evaporator coils for two different rooms Direct and Indirect. One Evaporator cooled by Direct expanssion of Refrigerant another Evaporator cooled by water. Separate tank type or shell and tube chiller construction for indirect cooling. Pump and pipe line arrangement for carrying water to indirect chiller. Control Panel : Consists of Complete with controls, Accessories pressure stat, thermostat , Humidistat, temperature indicator , scanner, Electrical control, safety control etc., with complete installation. OR with above specification 5 ton capacity package unit. RACBT-VI RACAT-02 2 Nos. 800000 3200000 Karwar -01 , Bidar-01 780000 3120000 SECTION-VI TECHNICAL SPECIFICATION Package-10: Procurement list of Air Condition Eqvipments for RAC Sector 370 RACBT-V, RACT-03 4 Nos. Karwar -02 , Bidar-02 Page 122 Ice Candy Unit : Ice candy unit complete with stainless steel tank, mould box, thermocol insulated sunmica body, agitator, compressor, motor ele. Temparature, pressure, refrigerant control gauges, motor, pipe fitting ele 3000kcal/hr. Candy Plan t : Consists Stainless steel 3 compartments. one for brine solution other two for candy storage. Evaporator coil immerse type installed in brine chamber. Brine chamber temp about -10 o C to -18 o C other two chamber temperature maintained about -18 o C. Tank Size : 38"x54"x24" inner size 48"x64"x35" outer size approx. 3 doors stainless steel. Outer body sunmica/ss. Inner body GI/SS Non corrossive material. Brine salt or calcium chloride density 12000. Condensing Unit : 3000 k- cal/hr(01 Ton) capacity compressor and Air Cooled condenser with fan motor. Receiver, Valves fittings & other essential controls, thermostatic Exp Valve & Solenoid Valve control candy mould box - 10 nos, made with food grade material preferably SS. Control Panel : Consists of Temp Indicator, Thermostat, Pressure Gauges, Scanner, Safety Controls, Contactors, Voltmeter & Ammeter,Starter, Indicators & Other Controls 6 53,102, 65,87,9 8 Recovery unit to Recover (collect) gas from CFC Appliances and HFC 134(a) Appliances. It consist of 1/6 HP or required capacity compressor. Condensor with fan (small size) Oil separator, Accumulator valve inlet and outlet for gas recovery, compound gauge & Pressure gauge with LP, HP cut out. Individual unit for CFC & HFC ISO approved. RACBT- VI,III,VI,V , RACAT-01 28 Nos. 85000 2380000 Karwar -14 , Bidar-14 7 45,33,2 8,46 Evacuating & charging station with double stage Vaccum pump, 1/2 HP Motor with Gas ballast & anti suck back valve. Charging station consist of Micron Vaccum Gauge, Compound & Pressure Gauge, Solenoid Valve & gas Charging, Suction & Discharge Valves & ports Vaccum pump capable of pulling vaccum upto 50 Microns of Hg. Evacuation & charging station along with Electronic weighing scale resisting 6 kg capacity with accurace of +/-1(one) gram for charging hydro carbons & HFC 134(a) ISO approved. RACBT-III- VI 16 No. 55000 880000 Karwar -08 , Bidar-08 14780000 Draft approved by the commissioner) Joint Director(Trg) for Commissioner, Employment & Training 1280000 Total Rs. One Crore Forty Seven Lakhs Eighty Thousand Only Karwar -02 , Bidar-02 320000 5 68,141 RACBT-V RACAT-03 4 Nos. Page 123 Page 124 Page 125 NCB-11 SL. NO. DGET SL. NO. DESCRIPTION OF THE ITEMS QTY REQD AS PER DGET PER ITI Estimate d Cost per Unit Total Estimated Cost Electronic engine control module-with connecting accessories and manual- demonstrator : This demonstrator shall provide a complete commercial multi-point Fuel Injection system for demonstration. This includes all the individual components of the system presented on a moveable, steel frame panel with each component clearly identified. The system comprises of all the elements that control the air-fuel ratio and the ignition timing, together with the ECU and all the sensors associated with the control system. Monitoring of ECU fault codes is made by means of a diagnostic plug to assist troubleshooting of fault conditions. Ten switched faults must be provided to allow for realistic fault diagnosis to be performed. Variation of the engine speed is simulated so as to allow the measurement of parameters within the system that are speed dependent. The demonstrator must allow the instructor to demonstrate the following: _ Engine management system fundamentals _ The electronic control unit (ECU) _ Sensor circuits and components & Fault diagnosis _ Actuator circuits and components & Fault diagnosis , Equivalent to MT80 Engine Control Module with Engine Engine control sensors 8 types. Specification:- (1) ECU, (2) Absolute Pressure Sensor (3) Throttle Position Sensor (4) Intake Air Temperature Sensor (5) Lambda sensor (6) T.D.C. Sensor (7) Engine Coolant Temperature Sensor (8) Engine RPM sensor This demonstrator shall provide a complete commercial multi-point Fuel Injection system for demonstration. This includes all the individual components of the system presented on a moveable, steel frame panel with each component clearly identified. The system comprises of all the elements that control the air- fuel ratio and the ignition timing, together with the ECU and all the sensors associated with the control system. Monitoring of ECU fault codes is made by means of a diagnostic plug to assist troubleshooting of fault conditions. Ten switched faults must be provided to allow for realistic fault diagnosis to be performed. Variation of the engine speed is simulated so as to allow the measurement of parameters within the system that are speed dependent. The demonstrator must allow the instructor to demonstrate the following: _ Engine management system fundamentals, _ The electronic control unit (ECU) _ Sensor circuits and components & Fault diagnosis., _ Actuator circuits and components & Fault diagnosis., _ Intake air temperature / Pressurized fuel systems. Connected with 8 type sensors, Actuator circuits and components with 4 stroke 4 cylinder engine Petrol engine 4 stroke (MARUTI/SIMILAR/4 cylinder) fitted with MPFI/carburetor fuel system for practice, up to 50 HP with manualsSpecification:- MPFI four cylinder Petrol engine having cubic capacity of 1000 to 1800 cc developing about 60 to 120 BHP at 5000/6000 RPM water cooled and with multipoint fuel injection system complete with all required accessories like radiator with safe guard, fuel tank with stand, alternator, battery with stand, starter motor, cooling fan etc. Engine is mounted on M.S. sturdy frame having four wheels for easy shifting and a panel board fitted on a frame having warning instruments in cluster unit. Engine must start from panel board by ignition switch and it must be in a working condition with speed controlled from pannel board.Engine is with all necessary sensor like (1) ECU, (2) Absolute Pressure Sensor, (3) Throttle Position Sensor, (4) Intake Air Temperator Sensor, (5) Lambada sensor, (6) T.D.C. Sensor, (7) Engine Idling Acutuator & (8) Piston Displacement : 1000 to 1800 CC - Maximum Output : 60 to 120 BHP, 5000 to 6000 RPM - Maximum torque : 7 to 15 NM at 4000 to 4500 RPM - Fuel Tank Capacity : 30 to 35 Liters - Fuel System : M.P.F.I System. 531250 531250 284750 284750 3 101 1 Nos. 2 89 1 each SECTION-VI TECHANICAL SPECIFIC ATION 1 11 2 No. 260000 520000 Package-11: Procurement list of Automobile Eqvipments for Automobile Sector Page 126 Diesel engine 4 stroke for practice, up to 80 HPType : Indian Make 4 Stroke Cycle water cooled Inline Diesel Engine. Engine Valve Lay Out: 4 Cylinder in line with two valve per Cylinder. Arrangement of Cylinder : In line, Piston Displacement : 1500 cc to 2000 cc, Max. Output (Bhp) : 50 to 75 Bhp at 4000 – 5000 RPM, Torque : 80 to 125 Nm at 2500 – 3100 RPM, Fuel Tank Capacity : 30 Ltr. to 40 Ltr, Fuel Injection : Rotary pump, Ignition : Indirect injection with Turbo Acrylic Sheet will be provided at the back side of the panel board for easy view of wiring.Diesel Engine complete with turbo assembly & all required accessories like radiator with safe guard, fuel tank with stand, alternator, battery with stand, starter motor, F.I. Pump, fuel filter, Cooling fan etc. With working condition. Engine will be mounted on M.S. Sturdy frame having four wheels for easy shifting and a panel board fitted on a frame . . Engine will be start from panel board by ignition switch and it will be in a running condition with speed controlled from panel board. Petrol Engine of latest model (CNG Engine) with workshop manuals Specification:- (MARUTHI/SIMILAR(4 CYLINDER) MPFI four cylinder Petrol engine having cubic capacity of 1000 to 1800 cc developing about 60 to 120 BHP at 5000/6000 RPM water cooled and with multipoint fuel injection system complete with all required accessories like radiator with safe guard, fuel tank with stand, alternator, battery with stand, starter motor, cooling fan etc. Engine is mounted on M.S. sturdy frame having four wheels for easy shifting and a panel board fitted on a frame having warning instruments in cluster unit. Engine must start from panel board by ignition switch and it must be in a working condition with speed controlled from pannel board. Engine is with all necessary sensor like (1) ECU, (2) Absolute Pressure Sensor, (3) Throttle Position Sensor, (4) Intake Air Temperator Sensor, (5) Lambada sensor, (6) T.D.C. Sensor, (7) Engine Idling Acutuator & (8) Engine Coolant Temperature Sensor etc.Engine Specifications:Type : 4 Stroke cycle, water cooled - No. of cylinders : 4 - Piston Displacement : 1000 to 1800 CC - Maximum Output : 60 to 120 BHP, 5000 to 6000 RPM - Maximum torque : 7 to 15 NM at 4000 to 4500 RPM - Fuel Tank Capacity : 30 to 35 Liters - Fuel System : M.P.F.I System . Petrol engines of cars latest models with manuals Specification:- (Huandai/Maruthi/Similar) MPFI four cylinder 16 Valves Petrol engine having cubic capacity of 1000 to 1800 cc developing about 60 to 120 BHP at 5000/6000 RPM water cooled and with multipoint fuel injection system complete with all required accessories like radiator with safe guard, fuel tank with stand, alternator, battery with stand, starter motor, cooling fan etc. Engine is mounted on M.S. sturdy frame having four wheels for easy shifting and a panel board fitted on a frame having warning instruments in cluster unit. Engine must start from panel board by ignition switch and it must be in a working condition with speed controlled from pannel board.ngine is with all necessary sensor like (1) ECU, (2) Absolute Pressure Sensor, (3) Throttle Position Sensor, (4) Intake Air Temperator Sensor, (5) Lambada sensor, (6) T.D.C. Sensor, (7) Engine Idling Acutuator & (8) Engine Coolant Temperature Sensor etc.with 16 valves. - Engine Specifications:Type : 4 water cooled - No. of cylinders : 4 - Piston Displacement : 1500 to 2000CC - Maximum Output : 60 to 120 BHP, 5000 to 6000 RPM - Maximum torque : 7 to 15 NM at 4000 to 4500 RPM - Fuel Tank Capacity : 30 to 35 Liters - Fuel System : M.P.F.I System. Diesel engine 4 stroke up to 10 HP / 80 HP running condition Type : Indian Make 4 Stroke Cycle water cooled Inline Diesel Engine. Engine Valve Lay Out : 4 Cylinder in line with two valve per Cylinder. Arrangement of Cylinder : In line, Piston Displacement : 1500 cc to 2000 cc, Max. Output (Bhp) : 50 to 75 Bhp at 4000 – 5000 RPM. Torque : 80 to 125 Nm at 2500 – 3100 RPM, Fuel Tank Capacity : 30 Ltr. to 40 Ltr., Fuel Injection : Rotary pump, Ignition : Indirect injection with Turbo. Acrylic Sheet will be provided at the back side of the panel board for easy view of wiring. Diesel Engine complete with turbo assembly & all required accessories like radiator with safe guard, fuel tank with stand, alternator, battery with stand, starter motor, F.I. Pump, fuel filter, Cooling fan etc. With working condition. Engine will be mounted on M.S. Sturdy frame having four wheel for easy shifting and a panel board fitted on a frame . 560000 2800000 540000 540000 7 94 5 No. 6 104 1 Nos. 519000 519000 5 100 1 No. 560000 560000 4 88 1 Nos. Page 127 Engine will be start from panel board by ignition switch and it will be in a running condition with speed controlled from panel board. 8 64 Chassis of heavy commercial motor vehicle with all accessories in working condition -TATA/ Leyland make 1 No 650000 650000 9 82 Petrol engine(4 strokes, Multi cylinder) of different makes in running condition.(1 No. with MPFI system & 1 No.with carburettor) Set of 2 Nos. ISO approved. 1 set 1068000 1068000 10 84 Diesel engine( 4 stroke, multi cylinder) of different makes in running condition - ISO approved. 2 Nos. 1200000 2400000 9873000 Draft approved by the commissioner) Total Rs. Ninty Eight Lakhs Seventy Three Thousand only for Commissioner, Employment & Training. Joint Director(Trg) Page 128 Consignee Govt I.T.I Honnavara Honnavara Honnavara Page 129 Honnavara Honnavara Honnavara Honnavara Page 130 Honnavara Honnavara Honnavara for Commissioner, Employment & Training. Joint Director(Trg) Page 131 NCB-12 SL. NO. DGET SL. NO. DESCRIPTION OF THE ITEMS Module Code QTY REQD AS PER DGET TOTAL Estimated Cost Per Unit TOTAL Estimated Cost Consignee Govt I.T.I 1 7,2 Linear ic trainer:- ,the unit should be micro controller based system. out put Dc voltage + 5 volts, 1 amp +12 volts, 0-15 volts 500 mili amps microcontrolled based Touch sensistive system for increment and Decrement for Voltage AC voltages 3-6-9-12,( transformer secondary, tappings )500 mili amps . E-12 series ½ watt resistar (ohms , kilo ohms , mega ohms values). capasiters electrolitic & non electrolitic capasiters standerd values. Bread board :- having high quality tie points. terminals 2mm(BS-2).Meter:- Micro controller based plasma meter for V&I mesuarments. Function genarater:- 20 hz to 20 kilo hz (sine,square,trangle waves.).TTL O/P Active components:- diodes , transisters ,zener diode of varieas values, FET, MOSFET, VDR,LDR,IC'S OP-AMP, TIMER IC's, REGULATER IC's the above camponent should have a built-in CRT type 5Mhz single trace analog oscciloscope and should be mounted an a attractive and ragued cabinate. the above system should be controlled remotely operating voltage 230 volts AC EAT-03 EBT-03 63 Nos. 63 19700 1241100 Tiptur-09, Chitradurga-09, Gowribidnur-09, Puttur-09, Nalathwad-09, Bagalkot-09, Mandya-09 2 2, 17, 23 Logic analyzer: 34 Channel Logic Analyzer 500MHz sampling, I2C, with BNC Inputs for channel inputs for each channel inputs with a computer interfaced internally config of INTEL C2Dpro, 250GB Hard disk and 64gb RAM and 14" TFT display for monitoring the signal path. with required softwares for operation, fully industrial type. the above system should be housed in a cubical 19X14" box. reputed company make.should have remote controlling facitity. EBT-04 EBT-06 EAT-03 21 Nos. 21 121200 2545200 Tiptur-03, Chitradurga-03, Gowribidnur-03, Puttur-03, Nalathwad-03, Bagalkot-03, Mandya-03 SECTION-VI TECHANICAL SPECIFIC ATION Package-12: Procurement list of Electronic Eqvipments for Electronic Sector Page 132 3 16,10 Magneto scope the system shouldbe microprocessor based system with control based on Atmeg system. the system should have Built in signal processors , Built in magnetoscope, built in atom processor, screen 17'inc TFT keyboard ;-flexible type built into the rack for operating, cubical ;-5 ft X 2.1/2ft X2. 1/2 ft, LCD display for field strength indication, switches touch sensitive microcontroller based and remotely operated build in deveice (8) field strength variation by micro controlled based increment/decriment system, built in moter of servo type power :- operating 230v 50hz and built in DC supply rack type EBT-03 EBT-04 32 Nos. 32 495000 15840000 Tiptur-04, Chitradurga-04, Gowribidnur-04, Puttur-04, Nalathwad-04, Bagalkot-04, Mandya-04, Hoovinahadagali- 02, Haliyala-02 19626300 Draft approved by the commissioner) for Commissioner, Employment & Training. TOTAL Rs. One Crore Ninty Six Lakhs Twenty Six Thousand Three Hundred Only Joint Director(Trg) Page 133 NCB-13 SL. NO. DGET SL. NO. DESCRIPTION OF THE ITEMS Module Code QTY REQD AS PER DGET Estimated Cost Per Unit TOTAL Estimated Cost Consignee Govt I.T.I 1 23,23 X-Y recorder: eight channel recorder should sense AC and DC voltage, AC and DC current, temperature, strain, pressure, light and should have an interfacing sampling unit interfaced to a PC. The whole system microcontroller based touch sensitive uniot to be connected to a multicolor recorder. the whole system should be operated remotely. EBT- 05,05 32 Nos. 128000 4096000 Tiptur-04, Chitradurga-04, Gowribidnur-04, Puttur-04, Nalathwad-04, Bagalkot-04, Mandya-04, Hoovinahadagali- 04 2 15,1,6 Oscilloscope Trainer 20 MH :-it should have 2 modules one is trainer module and other oscilloscope. the trainer module should be microcontroller based system. single PCB with each sections printed in multicolour for easy identification. All test points are drawn from the oscilloscope and can be connected to the trainer with the help of 24 pin D connector. 20MHz dual channel/dual trace oscilloscope having standard controles should be supplied along with the trainer Power - 230VAC/50Hz Mains operated . Oscilloscope in open form with all components and controls placed on single PCB. the above system should be controlled remotely. Amplifier, Time base, Channel section signals available as test points in the trainer. Separate sections for PS,EHT, VA, HA, TB & Trigger for easy identification. Fault creation and rectification should be provided. Legend Printing on PCB for easy identification of components. the whole unit should be used as a standard 20 MHz Dual Trace Oscilloscope. EAT-03 EAT- 05,EBT- 05 63 Nos. 47500 2992500 Tiptur-09, Chitradurga-09, Gowribidnur-09, Puttur-09, Nalathwad-09, Bagalkot-09, Mandya-09, Package-13: Procurement list of Electronic Trainers & Eqvipments for Electronic Sector SECTION-VI TECHANICAL SPECIFIC ATION Page 134 3 26,26 Frequency Analyzer: freequency range 150KHz to 1050MHz resolution, band width 20KHz - 500KHz, amplitude range - 100dbm to 10dbm, phace locked dirct digirtal systems, resolution bandwidth 9KHz,120KHz,1MHz, analog processing and display. The above system should be remotely controlled EAT- 03,03 8 No. 178500 1428000 Tiptur-01, Chitradurga-01, Gowribidnur-01, Puttur-01, Nalathwad-01, Bagalkot-01, Mandya-01, Hoovinahadagali- 01 4 6,192(A),1 ,1,14 Digital Electronics Trainer :-The unit should be microcontroller based system. o/p voltge-±5V/2A,±12V/15V at 500ma.Socket,8/16/20 pin Dip/ZIF - 4Nos, 28/40 pin dip/ZIF 1No.logic inputs: 12 Nos microcontroller based touch sensitive system for logic inputs. Logic outputs: 12 Nos dual color LEDs for logic status indication, ttl clock: 1Hz,10Hz,100Hz,1KHz,10KHz,100KHz,1MHz. Monopuls. Display: 3 digit seven segment display and also alpha numerical LCD display Potentiometer: 1K & 10K lin- 2No. Transisters compementory and symmitry pairs. Bread board: high quality terminals, 2mm,BS-2. The system should have robotic working module features i.e. forward, backward, left and right movements, which should be controlled remotely of an designated object.The above system should be mounted on a rugged sutcase type cabinet, and strongly suppporetd by instructional manual, having hand on exercises.the above system should be controlled remotely. operating voltage 230V AC 50Hz. EAT- 03,EBT- 4,4,4,6 70 Nos. 26500 1855000 Tiptur-10, Chitradurga-10, Gowribidnur-10, Puttur-10, Nalathwad-10, Bagalkot-10, Mandya-10, Page 135 5 5,3,340 Power electronic trainer:- the unit should be microcontroller system, Built in power supply: - Dc voltage + 5 volts, 2 amps. +12 volts, 1 Amps. 0-15 volts, 1amps.microcontrolled based Touch sensistive system for increment and Decrement for Voltage AC voltages:- 0 - 50V, 1 Amps. 15-0-15, 1 Amps ( transformer secondary, tappings ). E-12 series ½ watt resistar (ohms , kilo ohms , mega ohms values). capasiters electrolytic & non electrolytic capasiters of standerd values. Bread board :- having high quality 840/1680 tie points. terminals 2mm(BS-2). Meter: - Alpha numerical Plasma meter for AC/DC V&I mesuarments. Function genarater :- 20 hz to 20 kilo hz (sine,square,trangle waves.).TTL O/P. Active components :- diodes , transisters ,zener diode of varieas values, FET, MOSFET, SCR,TRIAC(small current ratings) DIAC,UJT, OP-AMP, VDR,LDR, TIMER IC's, REGULATER IC's, Solar cells,Crystalls, Wire wound potentiometer, the above camponent should be mounted an a attractive and ragued cabinate.should operate on Remote control system. operating voltage 230V AC 50Hz. EAT-03 EBT- 03,EAT- 02 77 Nos. 22400 1724800 Tiptur-07, Chitradurga-07, Gowribidnur-07, Puttur-07, Nalathwad-07, Bagalkot-07, Mandya-07, 6 18,18 RF/AF signal generators Trainer: Freequency 0 - 30MHz ACCURACY OF FREQUENCY :Within 20%. MAX. OUTPUT VOLTAGE :Approx. 0.5V. MODULATED FREQUENCY :Approx. 1KHz. PERCENTAGE OF MODULATION : :Approx.40% of (MHz) OUTPUT CONTROL FOR CARRIER WAVE : :High/Low selection (20dB) and continuously adjustable. OUTPUT CONTROL FOR A.F. : :Continuously adjustable0.7volts approximately at 1KHz , POWER SOURCE : :230V A.C.50Hz approx. trainer should have. Several test points on the circuit diagram to observe the waveforms and to maps measurements. Housing: It is housed is an elegant fiber cabinet Power: 230VAC - Mains operated with remote operating system. the above system should be of microcontroller based touch sensitive switches and the system should be remotely controlled EAT- 03,03 16 Nos. 22900 366400 Tiptur-02, Chitradurga-02, Gowribidnur-02, Puttur-02, Nalathwad-02, Bagalkot-02, Mandya-02, Hoovinahadagali- 02 Page 136 7 25 IEEE interface multimeter: the unit should be of microcontroller based system.6½ digits, true rms, 4 wire resistance meter, resolution 100nv, 100pa, 100mv and should have trigger input and offset correction and auto range correction. The above system is operated with microcontroller based touch sensitive system and remotely controlled. EAT-03 14 Nos. 65500 917000 Tiptur-02, Chitradurga-02, Gowribidnur-02, Puttur-02, Nalathwad-02, Bagalkot-02, Mandya-02, 8 10,56,27,3 2,N,238,2 66,19,32,1 9,32,19 Soldring & Desoldring station :- SOLDERING IRON (TEMPERATURE CONTROLLEDsolder station):_Microprocessore controlled with digital display should havecomplete with a temperature control from 350°F to 850°F and is temperature stable within ±9°F. The automatic shut-off features turns off the station after 99 minutes of inactivity to prolong tip, iron and station life. . Operates on 220V. solder station should have integrated complete with IR control power unit, soldering iron, iron holder with sponge and ETA tip.Can switch between °F&°C,iron is fitted with anon burnable silicone rubber cord for safety. " the above system is remotely controlled. EAT-01 ECBT- 03,EBT- 04,05,04,0 5,05,06,06 ,05,06 44 Nos. 36975 1626900 Tiptur-05, Chitradurga-05, Gowribidnur-05, Puttur-05, Nalathwad-05, Bagalkot-05, Mandya-05, Hoovinahadagali- 02, Haliyala-01, Malavalli-02, Shivmogga-02, Gurumitkal-02 9 14,368,N Digital Multimeter Trainer:- the system should be of microcontroller based The 4½ digit multimeter trainer should have. Several test points on the circuit diagram to observe the waveforms and to maps measurements. The digital multimeter accepts an analog quantity and converts it to an equivalent digital readout. It has the ability to measure the values of unknown resistance,voltage,current, and companent tester. Built in regulated power supply: -5V/150mA: - 5V/150mA Input Supply: 230 VAC/50Hz mains operated. the unit should be remotely controlled. EAT- 03,03,03 6 Nos 52,500.00 315000 Chitradurga-02, Gowribidnur-02, Bagalkot-02, 10 52,50 Earth fault locater- To test the open, short test of UG coaxial, network, power cables, should have the capacity to measure upto 6000 meters, should have the accuracy of 1%. With LCD display to measure and should have battery backup for measurement upto 10-12 hours. ECAT-03 ECAT-05 9 Nos. 335000 3015000 Malavalli-03, Shivmogga-03, Gurumitkal-03 18336600 Draft approved by the commissioner) Employment & Training. Total Rs. One Crore Eighty Three Lakhs Thirty Six Thousand Six Hundred Only Joint Director(Trg) for Commissioner, Page 137 NS-PKG-1 SL. No. DGET SL. No. DESCRIPTION OF THE ITEMS Module Code QTY REQD AS PER DGET PER ITI Estimate d Cost Per Unit Total Estimated Cost Consignee Govt I.T.I 1 94,144 I) Hermetic compressors 1/8hp & 1/2hp CFC Compressor:1/8 HP-01 No, 1/6 HP - 1 No, 1/2HP-1No. HFC134(a) Comp:1/8 HP-01 No, 1/6 HP - 1 No, 1/2HP-1No. RACBT-III,V 12 Nos.each 57800 693600 karwar-06, Bidar-06 2 90,105,162 Working model of vapour absorption system : 01 Ton(3000 k-cal/hr) capacity plant construction with complete components of AQUA-AMMONIA (Ammonia & Water) Absorption system. Consists of - Evaporator, Absorber,cooling system , pump. Generator(Steam Generator or gas burner) Rectifier, Analyzer, Condenser (Water cooled), Expansion valve, with all controls accessories, fitting etc., ISO approved. RACBT-VI,VI, RACAT- 01 6 Nos 65000 390000 karwar-03, Bidar-03 3 66,136,137 Water cooler storage type 60 ltrs cap. With stainless steel body. Hermetically sealed comp. forced Air Cooled condenser with water storage tank & cooling coil distribution around water tank. With thermostat & other Electrical control temp. maintained about 5 to 8 o C. ISO approved. RACAT-01,RACBT-V 6 Nos 88060 528360 karwar-03, Bidar-03 4 88,92,132 Acid test kit with Acid resistant centrifugal pump. 1/2 HP RACBTT-III-V 6 Nos 54300 325800 karwar-03, Bidar-03 5 151 Ice cuber, capacity 80 kg/24 hr with scaled compressor required capacity, Air cooled condenser, defrosting system PCB control & other complete accessories. Ice storage stainless steel tank. Capacity to store 80 kg of Ice ISO approved. RACAT-01 2 Nos. 85000 170000 karwar-01, Bidar-01 6 73 Split type AC 4500kcal/hr.(1.5 ton cap) with indoor unit & outdoor units with electronic remote control extension copper tube & other essential accessories. ISO approved. RACBT-IV 4 Nos. 42373 169492 karwar-02, Bidar-02 7 86 3 Ton (9000 k-cal/hr) capacity semi hermetic or open type compressor with fly wheel , Separate motor with coupler, pulley, belt & other Accessories to run compressor & provision of capacity control, a) speed control b) suction valve reed lift method OR any other capacity control may be adopted. ISO approved. RACBT-VI 2 Nos. 79200 158400 karwar-01, Bidar-01 LIST OF TOOLS & EQUIPMENTS TO BE PROCURED UNDER SHOPPING FOR PROJECT I.T.I's Page 138 8 55 Window air conditioner capacity 1.5 ton with remote control RACBT-IV 4 Nos. 32810 131240 karwar-02, Bidar-02 9 99 Frost free Refrigerator 260 liters capacity used with Eco- friendly H.C.Refrigerant RACBT-IV 4 Nos. 31068 124272 karwar-02, Bidar-02 10 62 Bottle cooler 110 litres 1/6 hp with stainless steel outer body, inner tank galvanized iron sheet, consist of 3 doors. Vertical Machine positive door seal with rubber gasket shelves for 300ML & 650ML ,1Ltr, 2Ltr bottle storage, capillary control Hermetically sealed compressor with forced Air fan type condenser cabinet frame with mild steel Eco friendly HC Refrigerant used temperature maintained between 1 to 5 o C . ISO approved. RACBT-V 2 Nos. 51500 103000 karwar-01, Bidar-01 11 59 Deep freezer 165 litres capacity temp maintained -18 0 C to -21 o C with stainless steel outer body inner body made with galvanized iron. RACBT-V 2 Nos. 28000 56000 karwar-01, Bidar-01 2850164 Draft approved by the Commissioner) Total Rs. Twenty Eight Lakhs Fifty Thousand One Hundred Sixty Four Only Joint Director(Trg) for Commissioner Dept Of Employment & Training Page 139 NS-PKG-2 SL. No. DGET SL. No. DESCRIPTION OF THE ITEMS Module Code QTY REQD AS PER DGET PER ITI Estimate d Cost Per Unit Total Estimated Cost Consignee Govt I.T.I 1 58 Phospating plant for about 25 to 50 kgs materials FBT-05 4Nos 105000 420000 BT Centre,B-22-01, chitradurgaraysamudra-01, kookanurnur-01, nanjangud-01 2 19 Vee block 300mm PMBT-01,AAT-01 09Nos 33575 302175 KGF-02, Belgaum-02, Kanakapura-02, Holenarasipura-02, Honnavara-01 3 50 Parallel shank end mill dia 5,8,10&12 HSS With IS Standard FBT-03 16Nos 18000 288000 BT Centre,B-22-04, chitradurgaraysamudra-04, kookanurnur-04, nanjangud-04 4 43 Side and face cutter A 160 x 10 x bore dia 27mm HSS With IS Standard FBT-03 12Nos 22500 270000 BT Centre,B-22-03, chitradurgaraysamudra-03, kookanurnur-03, nanjangud-03 5 44 Side and face cutter A 200 x 20 x bore dia 32mm HSS With IS Standard FBT-03 12 Nos 18900 226800 BT Centre,B-22-03, chitradurgaraysamudra-03, kookanurnur-03, nanjangud-03 6 37 Cylindrical cutter dia 80 x 90 x bore dia 27 mm HSS With IS Standard FBT-03 08 SETS 22500 180000 BT Centre,B-22-02, chitradurgaraysamudra-02, kookanurnur-02, nanjangud-02 7 38 SHELL END MILL 100X50X32 MM PMBT-05 8Nos 22000 176000 KGF-02, Belgaum-02, Kanakapura-02, Holenarasipura-02, 8 38 BALL END MILL 3,6,8,10 & 12 MM (SET OF 4 Nos. ) PMBT-05 8Sets 22000 176000 KGF-02, Belgaum-02, Kanakapura-02, Holenarasipura-02, 10 67 Arbor press No.2 and fly press No 2 standard make or Equivalent PMBT-05 4Set 54000 216000 KGF-01, Belgaum-01, Kanakapura-01, Holenarasipura-01, 2254975 Draft approved by the Commissioner) LIST OF TOOLS & EQUIPMENTS TO BE PROCURED UNDER SHOPPING FOR PROJECT I.T.I's for Commissioner Twenty two Lakhs fifty four thousand nine hundred and seventy five only Dept Of Employment & Training Joint Director(Trg) Page 140 NS-PKG-3 SL. No. DGET SL. No. DESCRIPTION OF THE ITEMS Module Code QTY REQD AS PER DGET PER ITI Estimate d Cost Per Unit Total Estimated Cost Consignee Govt I.T.I 1 116 Shear (Straight) Bench Shear 450 mm to cut MS Sheet upto 5MM thickness RACBT-I 8 Nos. 45000 360000 karwar-06, Bidar-06 2 26,49,49,3 3 Drill twist -Addsion make or Equivalent 6,8,10,12,14,16,18,20,22,24mm ABT-05,FBT-01,AAT- 02 22 SETS 14600 321200 BT Centre,B-22-03, chitradurgaraysamudra-03, kookanurnur-03, nanjangud-03, Honnavara- 10 3 33 Drill twist2-12MM set of 8 nos. parallel shunk/straight shunk-Addission make or equivalent AAT-01 10 sets 16872 168720 Honnavara-10 4 55 Shearing machine for cutting flat, square ,round bar ,and plates hand operated 10mm(appox) FBT-05 04Nos 42000 168000 BT Centre,B-22-01, chitradurgaraysamudra-01, kookanurnur-01, nanjangud-01 5 10 Ring spanner set of 12 pieces(6mm to 32mm) - Geodar or Equivalent ABT-05 17 Nos 8400 142800 Honnavara-17 6 27 Taps and Dies complete set in a box BA, BSW, BSF , metric with handle--Addsion make or Equivalent 0-6 BA , 6-24 mm ,1/4" - 1" , 1/4" - 1" set of 1 No. each ABT-05 2 SETS 59373 118746 Honnavara-02 7 25 File assorted 200mm , 2nd Cut (8 types) - Jk make or Equivalent ABT-05 16 nos 7200 115200 Honnavara-16 8 106 Tin smiths bench folder 600x1.6mm standard make ABT-02 1 No. 65450 65450 Honnavara-01 9 33 Bench Type Hand shear universal 250mm Taparia make or Equivalent ABT-02 4 Nos. 12580 50320 Honnavara-04 10 53 Tripod axle stand adjustable 1500kg capacity Standard make ABT-06 8 Nos. 4500 36000 Honnavara-08 11 7 Protractor with blade 150mm Mitutoyo make or Equivillant ABT-02 17 Nos 365 6205 Honnavara-17 12 39 Horses Standard make ABT-05 4 Nos. 1400 5600 Honnavara-4 13 23 Shear Tinmans 300mm Bench shear PMBT-02 32 Nos. 22500 720000 KGF-08, Belgaum-08, Kanakapura-08, Holenarasipura-08, 2278241 Draft approved by the Commissioner) LIST OF TOOLS & EQUIPMENTS TO BE PROCURED UNDER SHOPPING FOR PROJECT I.T.I's Twenty two Lakhs seventy eight thousand two hundred and fourty one only Dept Of Employment & Training Joint Director(Trg) for Commissioner Page 141 NS-PKG-4 SL. No. DGET SL. No. DESCRIPTION OF THE ITEMS Module Code QTY REQD AS PER DGET PER ITI Estimate d Cost Per Unit Total Estimated Cost 1 ,33,33,33,3 3,33 ½ Dove tail chisel EBT- 01,01,01,01,EBT- 01,EBT-01 102 Nos. 450 45900 chitradurga- 17,madikeri- 17,puttur,17,hadagali- 17,mandya- 17,Tiputtur-17 2 ,26,26,26 18' jack plainer EBT-01,EBT-01,EBT- 01,01 68 Nos. 1900 129200 chitradurga- 17,mandya-17,puttur- 17,Gowribidnur-17 3 102,69,69, 69,69,69,6 9 24'' Jack plainer, requted company make EBT-01,01,EBT- 01,EBT-01,01,01,01 14 Nos 3200 44800 Gowribidnur- 2,hadagali-2,mandya- 2,haliyala-2,madikeri- 2,puttur-2,Tiputtur-2 4 25,25 9" smooth plainer EBT-01,01 33 Nos. 1800 59400 puttur-16,hadagali- 17 5 18,18 Adjustable spanner 300 mm FBT-06,06 2 Nos 1200 2400 chitradurga-01 NO, nanjangud-01 NO 6 35 Adjustable spanner 12 cms / 150 mm FBT-01 33 Nos 600 19800 chitradurga 7 11,11,,,11, 11 Adjustable spanner/slide rinch: 20cms - taparia EBT- 02,03,02,03,EBT- 02,03 102 Nos. 900 91800 Tiputtur-17,Tiputtur- 17,chitradurga- 17,chitradurga- 17,mandya- 17,mandya-17. 8 33,12,63,6 7,12,63, Allen hexagonal keys 2.5 to 12 FBT-01,EAT-02,EBT- 01,EBT-01,EAT- 02,EBT-01,01 26 Sets 350 9100 nanjangud- 02,bagalkote- 4,mandya- 04,nalatwad- 4,Tiputtur-4,Tiputtur- 4,chitradurga-4 9 64,64 Alloy steel test pieces of known composition of atleast 15 different steel sizes FBT-05,05 2 Sets 2500 5000 bt centre- 01,nanjangud-01 NO 10 108 Anemometer WANE type) RACAT-01 2 Nos. 18300 36600 karwar 11 ,42,9,9,9 Angle plate 10x20 cm EBT- 01,01,01,01,EBT-01 20 NOS 2200 44000 chitradurga-4, Gowribidnur-4,puttur- 4,Tiputtur-4,mandya- 4 12 38,38 Angle Plate Adiustable 250x150x175 PMBT-01,FBT-01, 4 nos 9000 36000 KANKAPUR- 02,nanjangud-02NO LIST OF TOOLS & EQUIPMENTS TO BE PROCURED UNDER SHOPPING FOR PROJECT I.T.I's Consignee Govt I.T.I Page 142 13 37 Angle plate size 200x100x200 mm FBT-01 2 Nos 4500 9000 nanjangud 14 28,28,28,2 6 Annealing box 152 x 50 x 45 cm M.S Plate 3 mm Thick FBT-05,05,02,05 4No 3500 14000 kookanuranur- 02,nanjangud-01,bt centre-01 NO. 15 16,16,16,1 6 Anvil face stake FBT-02,02,02,PMBT- 02 16 Nos 2500 40000 bt centre- 04,kookanuranur-04, nanjangud- 04,kanakapura-04 16 2,2,2,2,2,2, 2,3,3 Apron leather FAT-03, 01, 04, 03, 04,01, FBT-04,05,05 153Nos 350 53550 chitradurga- 68,kookanuranur- 51,nanjangud-34, 17 30,33,33 Assorted carbide lathe tools with holder different shapes and sizes (Set of 6 pcs) FBT-03,03,03 6 sets 2500 15000 kookanuranur-04,bt centre-01,nanjangud- 01 18 36,36,36 Auto - transformer - variac, 5amps enclosed type 230 v AC FBT-06,06,06 3Nos 4500 13500 bt centre- 01,nanjangud- 01,chitradurga-01 NO 19 112 Ball valve service valve, hand hut of valve of Ό’’ to 7/8’’ RACAT-3 5 no. 17200 86000 BIDAR 20 9,9,9 Ballpane hammer 0.5 Kg with handle FBT-02,02,02 51 No. 350 17850 bt centre- 17,chitradurga- 17,nanjangud-17 21 24,24,24 Bar magnet FBT-06,06,PMBT-03 3 No. 600 1800 chitradurga-01,bt centre- 01,Holenarsipura-01 NO 22 17,17,17 Beak iron stake FBT-02,02,02 12Nos 2500 30000 nanjangud- 04,kookanuranur- 04,bt centre-04 NO. 23 76,81,81,8 1,33 Bench lever shears 250 mm blade x 3 mm capacity FBT-02,PMBT- 02,02,02,ABT-02 4No 5600 22400 nanjangud-01,KGF- 01,KANK- 01,HNPUR-01 24 6 Bending spring external type, for copper RACBT-03 4 Sets 750 3000 karwar 25 53,53,53,5 3,53 Bessing mallet FBT-02,02,02,PMBT- 02,02 20 nos 2800 56000 bt centre- 04,kookanuranur-04, nanjangud-04,KANK- 04,holenarsipura-04 26 ,40,7,7 Block V pair 7 cm and 15 cm with clamp EBT-01,01,01,01 14 Sets 19500 273000 chitradurga- 2,Gowribidnur- 4,hadagali-4,Tiputtur- 4 Page 143 27 43,45 Blow lamp 1 lt FBT-02,05 3Nos 1500 4500 nanjangudan 28 21,21,21,5 1,51,19,01, 01,01,01,0 1,19,01,19 Brass rule 30 cm or nickle chrome steel rule 30 cm FBT- 04,04,04,01,06,RAC T-01,03,PMBT- 03,04,01,05,01,02,0 3 119Nos 130 15470 bt centre- 04,nanjangud-21, chitradurga- 08,BIDAR- 10,kanakapura- 55,holenarsipura-21, 29 44,44,34,3 4,64 Brush steel wire 5 cm x 15 cm FBT- 05,05,05,05,PMBT- 02 26Nos 250 6500 nanjangud- 05,kookanuranur- 01,chitradurga- 04,kanakapura-16 30 87,87 Buffing and polishing machine FBT-02,02 2 Nos 4500 9000 chitradurga- 01,nanjangud-01 31 78,31 C’ Clamp 150mm PMBT-02,04 8 Nos. 450 3600 holenarsipura 32 4,3,10 Caliper inside 20 cm spring,reputed company make. EBT-01,01,FBT-05 42 Nos. 220 9240 Puttur- 17,17,nanjangudud- 8 33 10,10,10 Caliper Outside 15 cm FAT-01,03,04 51Nos. 160 8160 kookanurNUR 34 9 Calipers outside 20 cm FBT-05 8 Nos 220 1760 nanjangud 35 7,7 Camber Angle gauge AAT-02,01 2 Nos 22700 45400 Honnavara 36 33,63 Card file EBT-01,01 8NOS 90 720 hadagali-4,nalatwad- 4 37 70,,70,70 Carpenter vice 10 “ EBT-01,01,01,01 64Nos 4800 307200 hadagali- 16,chitradurga- 16,madikeri- 16,puttur-16 38 37,37,44,4 4 Centre drill A 1 to 5 (A1,A2,A3,A4,A5) FBT-03,03,01,01 12Nos 4000 48000 chitradurga- 06,nanjangud-06 Nos 39 58 Centre gauge 60 PMBT-05 1 No. 290 290 holenarsipura 40 19,6,3,6,6 centre punch 10 cm FBT- 05,01,02,03,PMBT- 05 85Nos 100 8500 nanjangud-68, holenarsipura-17 Nos 41 8,8,8,8 Centre punch 9 mm x 127 mm FBT-04,FAT- 01,03,04 68Nos 150 10200 nanjangud nanjangud- 17,kookanuranur-51 Nos 42 67,67 Chart for spark test FBT-05,05 2 Nos 800 1600 chitradurga- 01,nanjangud-01 43 23,23,23 Chiesel cold cross 9mm FAT-01,03,04 3 No. 200 600 bt centre 44 14,14,14,1 4,14,14,14 Chipping screen hand FAT- 04,01,03,04,FBT- 04,FAT-01,03 119Nos 850 101150 chitradurga- 51,kookanuranur- 51,nanjangud-17 45 41,41,41 Chisel 9 mm round nose EBT-01,EBT-01,EBT- 01 12 nos 160 1920 mandya-4,puttur- 4,tiptur-4 46 ,9,9 Chisel cold EBT-01,EBT-01,EBT- 01 51 Nos 160 8160 bagalkote- 17,mandya-17,puttur- 17 47 39,39 Chisel cold & cross cut EBT-01,01 8 Nos. 390 3120 hadagali-4,puttur-4 Page 144 48 40,7,7,7 Chisel cold 19 mm flat : reputed company make EBT-01,FAT- 01,03,04 55 Nos. 290 15950 puttur- 4,kookanuranur-51 49 7,32,38,14, 14 Chisel cold flat 25mm x 250 mm FBT-05,02,ABT- 02,FBT-01,PMBT-01 76 Nos 350 26600 nanjangud nanjangud-55,HON- 04,KGF-17 50 8 Chisel cold flat 6 mmx150mm FBT-05 17 Nos 190 3230 nanjangud 51 75 Circlip Pliers Out Side AAT-01 1 Nos 1280 1280 Honnavara 52 126 Circulating water pump (small) RACAT-3 1 no. 13400 13400 BIDAR 53 42,,75,42 Clamp "C" 5 cm &10 cm: reputed company make EBT-01,01,01,EBT- 01 16 Sets 6100 97600 Tiputtur- 4,chitradurga- 4,Gowribidnur- 4,mandya-4 54 46,46 Clamps C 100 mm FBT-01,ABT-01 4Nos 400 1600 nanjangud-02,HON- 02 No 55 47 Clamps C 200 mm FBT-01 2 Nos 850 1700 nanjangud 56 48 Cleaning tray 45 X 30 c.m AAT-02 4 Nos 430 1720 Honnavara 57 51 Coil spring compressor for suspension spring ABT-06 1 Nos 12600 12600 Honnavara 58 31 Combination plier 200 mm FBT-01 2 Nos 470 940 nanjangud 59 5,5,6,6,6,3 8,38,40,1 Combination pliers: 150 mm with serrated jaws pipe grip side cutters capacity 1.60m hard wire (1500 newton/mm square)- taparia or equivalent make. EBT-04,05,EAT- 02,02,02,EBT- 01,01,PMBT-02,ABT- 03 73 Nos. 325 23725 puttur-17,17,Tiputtur- 4,puttur-4,bagalkote- 8,puttur-4,HNP- 2,HONVR-17 60 5,7,7,7 Combination pliers: 180 mm with serrated jaws pipe grip side cutters capacity 1.60m hard wire (1800 newton/mm square)- taparia EBT-06,02,03,06 68 NOS 400 27200 Tiputtur-04,puttur- 17,17,17 61 100 Compressors testers for small hermetic compressors RACBT-03 1 No 8700 8700 karwar 62 22 Copper bit soldring iron 0.25kg ABT-03 5 Nos 1260 6300 Honnavara 63 68,68,68,6 9,68,68,68 Counter Drill 18” EBT- 01,01,01,01,01,01,E BT-01 28 NOS 3400 95200 hadagali-4,Tiputtur- 4,haliyala-4,nalatwad- 4,madikeri-4,puttur- 4,mandya-4. 64 6,6,6,6 Cross Peen Hammer 0.25 Kg with handle PMBT-02,FBT- 02,02,02 68Nos 400 27200 holenarsipura-17,bt centre- 17,chitradurga- 17,nanjangud17 65 20,20,20 Cross pein hammer 115 gms with handle EBT-01,01,01 51 Nos. 210 10710 puttur-17,Tiputtur- 17,bagalkote-17. 66 65 Crow bar 910 x 25 mm FBT-02 2 Nos 900 1800 Devarayasamudra 67 52 D E Spanner G P (6 mm to 32 mm)(set of 12 spanner) FBT-02 2 Nos 1500 3000 Devarayasamudra 68 128,123, 124 Db meter RACAT-1,2,3 6 Nos. 8000 48000 BIDAR Page 145 69 75,75 DeScaling pump set with stainless steel impeller & housing complete with motor 1 hp & accessorie. RACBT-6,6 2 No. 69550 139100 BIDAR 70 106, 107, 106, 106 Dial thermometer remote control, armoured capillary dial 75mm-50C to + 50C RACAT-02,01,02,03 8 Nos 3600 28800 karwarWR- 04,BIDAR-04 71 8,8 Diogonal cutter: 160mm,Taparia or equivalent EAT-02,02 8 Nos. 275 2200 bagalkote-4,puttur-4 72 5,,9,9,9,9 Divider spring 20cm EBT-01,FAT- 01,3,4,4 34 Nos. 200 6800 puttur- 17,kookanuranur-17 73 ,17,17 Dot slot punch EBT-01,01,01 51Nos 230 11730 BGK-17,puttur- 17,Tiputtur-17 74 3,3,3,3,3,3, 3,19,19,19, 19,19,4,4,1 1,11,11,11 Double bladed electricain knife:- heavy duty, reputed company make. EBT- 06,04,05,06,EBT04, EBT-06,EBT-06,EBT- 01,EBT-01,EBT- 01,01,01,FBT- 06,PMBT-03,EAT- 02,02,02,02 270 Nos 150 40500 haliyala-17,hadagali- 17,17,17mandya- 17,madikeri- 17,mandya- 17.hadagali- 17,mandya- 17,haliyala- 17,madikeri- 17.puttur- 17,.chitradurga- 17,holenarsipura- 17,puttur- 16,bagalkote- 16,hadagali- 16,Tiputtur-1 75 39 Double ended off -set spanner (W.W) - 3 to 13.5 mm set of 7 No.s AAT-03 1 Set 2496 2496 Honnavara 76 38 Double ended spanner 6 to 32 mm-set of 12 No.s AAT-03 1 Set 9900 9900 Honnavara 77 40 Double open ended Ignition spanner set (BA0X128X9 set of 5) AAT-03 1 Set 2700 2700 Honnavara 78 29,33,29,2 9,29,47 Dow tail saw EBT-01,01,01,01,01 85 NOS 480 40800 madikeri- 17,bagalkote- 17,hadagali- 17,puttur-17,Tiputtur- 17, 79 47,14 Drill brace hand 0-12 MM EBT-01,01 5 Nos. 3300 16500 Gowribidnur-4,puttur- 1 80 53 Drill chuck 12 mm: reputed company make EBT-01 4 600 2400 Tiputturtur 81 33 Drill Twist (asotted) 3-6 MM Set of 4 Nos AAT-01 10 Sets. 2000 20000 Honnavara 82 48,15,15,1 5 Drill twist S/S 1.5 to 12 MM by 0.4 MM EBT-01,01,EBT- 01,EBT-01 16 NOS 6500 104000 Gowribidnur- 4,hadagali-4,mandya- 4,Tiputtur-4 83 41 Earth clamps FBT-04 12 Nos 300 3600 nanjangud Page 146 84 50,50,50 Elco meter FBT-05,05,05 3 Nos 500 1500 bt centre- 01,kookanuranur- 01,nanjangud-01 85 26,26,26,5 Electric Drill machine portable 6mm capacity 250 V PMBT-03, FBT-06, 06, ABT-03 4 Nos. 6000 24000 KGF-01,chitradurga- 01,kookanuranur- 01,HONVR-01 86 17,17 Electric Drilling machine portable 10mm EAT-02,02 8 NOS 7000 56000 BGK-04,puttur-04 87 7 Electrician testing pencial (line/neon tester) ABT-03 17Nos 85 1445 Honnavara 88 45,45,44,4 5 Electrode holder 400 amps FBT-04,FAT- 04,03,01 24 Nos 500 12000 devarayamdra 89 54,54,54 Endfaked mallet FBT-02,02,PMBT-02 12 Nos 230 2760 chitradurga- 4,nanjangud- 04,holenarsipura-04 90 12 ,12 Engineers screw driver PMBT-01 34 Nos. 125 4250 holenarsipura 91 47 Face mill dia 30 with 2 sets of carbide inserts FBT-03 2 Nos 8000 16000 nanjangud 92 48 Face mill dia 40 with 2 sets of carbide inserts FBT-03 2 Nos 8000 16000 nanjangud 93 49 Face mill dia 80 with 2 sets of carbide inserts FBT-03 2 Nos 8000 16000 nanjangud 94 6,4,,26,4,7 2,72,102,1 02, 102 Feeler gauge 10 blades: with handle reputed company make EBT- 02,02,01,01,02,PMB T-01,01,RACAT- 01,03,02 37 NOS 475 17575 nalatwad-4,Tiputtur- 4,chitradurga- 4,puttur-4,bagalkote- 4,KANK- 01,holenarsipura- 01,karwar-10,BID-05 95 20,20,20,2 0 File cut saw 15 m smooth: with handle reputed company make EBT-01,01,01,EBT- 01 16 Nos. 715 11440 puttur-4,Tiputtur- 4,haliyala-4,mandya- 4. 96 21,21,21,,3 2 File feather edge 15 cm smooth EBT-01,EBT- 01,01,01,01 20nos 650 13000 mandya-4,haliyala- 4,Tiputtur- 4,bagalkote- 4,nalatwad-4. Page 147 97 11,11 File flat 2 nd Cut 250 mm PMBT-01,01,05,05 68Nos 685 46580 kanakapuraPR- 17,holenarsipura-17 98 18 File flat 200mm 2nd cut with handel EAT-02 4 Nos 600 2400 Tiputturtur 99 13 File flat 25 smooth EBT-01 17 nos 600 10200 Mandya 100 35,35,41 File flat 250 mm smooth PMBT-02,02,ABT-02 6 Nos. 720 4320 holenarsipura- 02,HONVR- 02,KANKPR-02 101 18 File Flat 2nd cut 200mm EAT-02 4Nos 600 2400 bagalkotealkot 102 36 FILE FLAT 300MM BASTARD` PMBT-02 2 Nos 475 950 KANAKAPURA 103 32,32,32,3 2,32,32,32 File flat 35 cm rough FAT- 01,03,04,03,01,04,0 1,04 48 Nos 600 28800 bt centre- 18,chitradurga- 18,kookanuranur-12 104 10,10,10 File flat bastard 300 MM PMBT-01,05,FBT-01 51 Nos 600 30600 kanakapuraPR- 34,chitradurga-17 105 51,13,35 File flat smooth 200 mm FBT-01,PMBT- 01,FBT-02 23 Nos 600 13800 bt centre- 04,holenarsipura- 17,kookanuranur-2 106 65 File flat,2nd cut, length 150mm RACAT-2 5 no. 420 2100 BIDAR 107 52,52 File H/R 2nd cut 250 mm FBT-01,PMBT-01 8 Nos 850 6800 nanjangud- 04,holenarsipura-04 108 37,38,38,3 7 File half round 300 mm smooth FBT- 02,02,02,PMBT02 12Nos 1200 14400 nanjangud-6,bt centre- 10,holenarsipuraA- 02 109 30,30 File half round 25 Cm 2nd cut EBT-01,01 8 Nos. 600 4800 hadagali-4,madikeri- 4. 110 31,31,31 File half round 25 Cm bastered EBT-01,01,01 12 NOS 600 7200 hadagali-4,madikeri- 4,Tiputtur-4 111 31,31,31,3 1,37 File half round bastard 30 cm FBT-04,FAT- 01,04,03,FBT-02 26Nos 700 18200 bt centre- 6,chitradurgaRA- 18,kookanuranur-02 112 14,14,14 File half round second cut 15 cm, with handle, reputed company make EBT-01,01,01 51 NOS 480 24480 hadagali-17,haliyala- 17,madikeri-17 113 32,32,32 File hand 15 Cm EBT-01,EBT-01,EBT- 01 12 NOS 480 5760 hadagali-4,mandya- 4,nalatwad-4. 114 19,19,19,1 9,19 File knife edge 15 Cm smooth EBT- 01,01,01,01,EBT-01 20 NOS 480 9600 hadagali-4,madikeri- 4puttur-4,Tiputtur- 4,mandya-4. 115 6 File round 150mm PMBT-03 16Nos 700 11200 holenarsipura 116 23 File round 20cm 2nd cut EBT-01 4 nos 150 600 Mandya 117 24 File square 15 cm2nd cut:with handle reputed company make EBT-01 4 Nos. 250 1000 Puttur 118 25,42,55 File square 25 cm 2nd cut:with handle reputed company make EBT-01,PMBT-05,01 12 Nos. 780 9360 puttur- 04,holenarsipura-08 119 12 File square rough 25mm FBT-05 8Nos. 780 6240 chitradurga Page 148 120 29,,29,62,2 9,29 File swiss needle type set of 12 reputed company make EBT- 02,01,01,01,01,EBT- 01 24 NOS 1900 45600 madikeri- 4,chitradurga- 4,Tiputtur- 4,Gowribidnur- 4,hadagali-4,mandya- 4 121 22,22,22 File traingular 15 cm smooth:with handle reputed company make EBT-01,01,EBT- 01,EBT-01 12 Nos. 450 5400 puttur-4,Tiputtur- 4,mandya-4 122 53,53 File Triangular Smooth 200 mm PMBT-01,01 8Nos. 780 6240 kanakapura- 04,holenarsipura-04 123 76 File Triangular Smooth 250mm PMBT-02 4Nos 780 3120 KANAKAPURA 124 18,18,18,1 8 File warding 15 Cm smooth EBT-01,01,01,EBT- 01 16 Nos. 480 7680 hadagali-4,madikeri- 4,Tiputtur-4,mandya- 4. 3135971 Draft approved by the Commissioner) for Commissioner Dept Of Employment & Training Rupees Thirty one Lakhs thirty five thousand nine hundred and seventy one only Joint Director(Trg) Page 149 NS-PKG-5 SL. No. DGET SL. No. DESCRIPTION OF THE ITEMS Module Code QTY REQD AS PER DGET Estimate d Cost Per Unit Total Estimated Cost 1 101,101 Fin starightner/fin comb. RACAT-01,03, 10 Nos. 305 3050 karwar-05,BID-05 2 3 Finner chisel wood 6mm,12mm,25mm ABT-03 2 Nos 1890 3780 Honnavara 3 8,10,8,11,6 ,8,8,8,8,8,9 ,8,8,8,8,11, 8,8,10,8,11 Fire Extinguisher 5 kg Capacity EBT- 03,04,05,06,N,EBT- 01,02,04,03,05,06,E BT01,EBT- 01,03,05,06,02,03,0 4,05,08 21 NOS 9000 189000 Mandya-04,hadagali- 1,nalatwad- 1,1,1,1,1,1,mandya- N,puttur-1,haliyala- 1,2,1,puttur- 01,1,1,1,1 4 11,11 Firmer Chisel 25 mm PMBT-03,03 8Nos 295 2360 kanakapura- 04,holenarsipura-04 5 61 Flange Micrometer Size 25-50mm PMBT-05 1 Nos 2300 2300 KANAKAPURA 6 33,33,15,1 5,15,15 Funnel Stake FBT-05,05,02,02,02, PMBT-02 20Nos. 1250 25000 chitradurga- 4,nanjangud-4,bt centre- 04,kookanuranur- 04,holenarsipura-04 7 95,62,62,6 2 Gauge imperial sheet EBT-01,01,EBT- 01,EBT-01 16 Nos. 190 3040 Gowribidnur- 4,madikeri-4,mandya- 4,puttur-4. 8 23 Gimlet 6 mm EBT-01 17 Nos. 100 1700 Puttur 9 53,53,52,5 2,52,52,51, 52 Glass with 108 mm x 82 mm / Equilent For welding FBT- 04,04,04,04,FAT- 01,01,03,04 136Nos. 50 6800 chitradurga- 36,nanjangud-84,bt centre-16 10 51,51,51 Glasso meter FBT-05,05,05 3Nos. 1500 4500 bt centre- 01,nanjangud- 01,kookanuranur-01 11 1,1,1,1, Gloves pair leather FBT-04,FAT- 01,03,04 68Nos 325 22100 chitradurga- 17,kookanuranur-51 12 5,5,5,5,5,,1 ,5,5,5,8,20 6,8 Goggle pair welder FBT-04,FAT- 1,03,04,FBT-04,05, FAT-01,03,04,EBT- 04,04,04 188 Nos 125 23500 bt centre- 34,nanjangud- 51,chitradurga-17, kookanuranur- 51,bagalkote- 17,Gowribidnur- 17,Tiputtur-1. Consignee Govt I.T.I LIST OF TOOLS & EQUIPMENTS TO BE PROCURED UNDER SHOPPING FOR PROJECT I.T.I's Page 150 13 45 Grinding Wheel dresser star type FBT-01 1 No 2000 2000 kookanurNUR 14 41 Grip wrench 200 mm FBT-02 1 No 500 500 chitradurga 15 57,34,27,1 5 Hacksaw adjustable 250-300 mm with blades / 300 MM FBT-01,03,04,EBT- 01 27 Nos 450 12150 chitradurga- 10,mandya-17 16 5 Half inch dow tail chisel EBT-01 17Nos 250 4250 Nalatwad 17 14,14,14,1 4 Half Moon Stake FBT-02,02,PMBT- 02,02 16 Nos 400 6400 kookanuranur-04,bt centre- 04,kanakapura- 04,KGF-04 18 60,60,60,6 0,60,60,60 Hallowing hammer with handle FBT- 02,02,02,02,PMBT- 02,02,02 28Nos 1100 30800 bt centre- 04,nanjangud- 04,chitradurga- 04,holenarsipura- 04,BELGM- 04,kanakapura- 04,kookanuranur-04 19 12,23,23,2 8,28,28,23, 22,22,22,2 2,22 Hammer ball pien 1.0Kg / 900 GRMS FBT- 06,06,03,03,01,01,0 3,01,PMBT-03,FBT- 05,04,04,FAT-04,01 95 Nos 900 85500 chitradurga-66,bt centre- 22,kookanuranur- 06,kanakapura-01 20 5,11 Hammer ball Pein 0.25 Kg / 300 GMS FBT-06,EBT-01 34Nos 350 11900 chitradurga- 17,Tiputtur-17 21 7,7,7,7,7,1 4,22,14,10 Hammer B.P. 0.5 Kg PMBT-05,FBT- 01,03,01,03,EAT- 02,02,02,02,EBT-01 122 Nos 465 56730 KGF-17,bt centre- 34,chitradurga- 34,bagalkote- 8,nalatwad- 4,mandya-4,Tiputtur- 21 22 22,28,22,2 2,22,22,22, 22 Hammer block PMBT-02,02,02,ABT- 02,FBT-02,02,02,02 29 Nos 600 17400 BELGM- 17,kookanuranur- 02,kanakapura-02,bt centre- 02,chitradurga- 02,nanjangud- 02,holenarsipura-02 23 20,20,20,8 2,82,20,20 Hammer creasing with handle FBT- 02,02,02,02,PMBT- 02,RACBT-01,01 28 Nos 1200 33600 bt centre bt centre- 4,kookanuranur- 04,kanakapura- 04,BIDAR-04,karwar- 04,chitradurga- 04,nanjangud-04 24 30,30,27,3 0 Hammer lead 1 Kg FBT- 01,01,01,RACBT-01 8 Nos 2200 17600 chitradurga chitradurga- 02,nanjangud- 02,BIDAR- 02,kookanuranur-02 Page 151 25 81,19,19,8 1,19,19,19, 14 Hammer peaning with handle RACBT-1,01,01,FBT- 02,02,02,02,PMBT- 02,EAT-02,02 36 Nos 1200 43200 BIDAR- 04,kookanuranur- 04,kanakapura- 04,karwar-04,bt centre- 04,chitradurga- 04,nanjangud- 04,madikeri- 4,chitradurga-4 26 21 HAMMER PLANISHING WITH HANDLE PMBT-02 4Nos 1200 4800 KANAKAPURA 27 6,6,6,6,6,6, 6,6,6,6,6,6 Hammer scaling 0.25 kg with handle FBT-04,04,04,FAT- 04,01,03,04,03,01,0 1,03,04 204 Nos 300 61200 bt centre- 17,chitradurga- 68,nanjangud- 68,kookanuranur-51 28 22 Hammer smith 1.8 kg handled FBT-05 4 Nos 1100 4400 nanjangud 29 28,28,28,2 8,28,28,28, 28,28,28,2 8 Hammering block 5 cm thick 60 sq FBT-04,04,FAT- 01,03,04,01,03,04,0 1,04,03 22Nos 1300 28600 chitradurga-08,bt centre-06,nanjangud- 08 30 101 Hand blower portable complete 1/10 HP RACBT-03 1 No 3900 3900 karwar 31 45,45 Hand drill 0 to 6 mm, 8mm, 10mm, and 12 mm FBT-02,02 4 Nos 1500 6000 nanjangud- 02,chitradurga-02 32 77 Hand Drilling Machine power 10 mm FBT-01 1 No 5000 5000 kookanurNUR 33 32,32 Hand File, 15 cm: with handle reputed company make EBT-01,01 8 Nos. 400 3200 madikeri-4,puttur-4. 34 136,136 Hand former & 20 g capacity lock former. RACBT-5,05 2 Nos 6500 13000 BIDAR BIDAR-01,karwar-01 35 39,39,39,3 9,98,39 Hand Grooer 3 mm ,4mm, 5mm,. PMBT-02,02,FBT- 02,02,02,RACBT-01 24 Nos 345 8280 kanakapura- 04,kookanuranur- 04,NSN- 04,holenarsipura- 04,karwar-04,bt centre-04 36 36,36,38,3 3 Hand hammer 1 kg with handle FBT-03,03,03,PMBT- 04 8 Nos 1200 9600 bt centre bt centre- 02,chitradurga- 02,kanakapura- 02,kookanuranur-02 37 35,35 Hand Reamer adjustable 10.5 to 11.25, 11.25 to 12.75, 12.752 to 14.25, 14.25 to 15.75 mm OR IN INCHES H1 TO H5 AAT-02,01 4 Sets 16900 67600 Honnavara Page 152 38 27,27,33,2 7,27,16,16, 16,,16 Hand shear universal 250 mm FBT- 02,02,02,02,ABT- 02,EAT- 02,02,02,02,02 44 Nos 3500 154000 chitradurga- 04,nanjangud- 04,HON-04,bt centre- 04,kookanuranur- 04,hadagali-4,puttur- 4,Tiputtur-4,mandya- 4,BGK-8. 39 58,53 Hand vice 50 mm jaw FBT-01,02 18Nos 850 15300 kookanuranur- 02,chitradurga-16 40 13,13,13,1 3, Hardie or bottom sit for anvil 5 cm FBT-05,05,05,05 16 Nos 1800 28800 bt centre- 04,chitradurga- 04,kookanuranur- 04,nanjangud-04 41 61 HC refrigerant in cylinder/disposable containers RACBT-03 1 No 650 650 karwar 42 9,9 Heat sink pliers: reputed co. Make EBT-02,03, 34 Nos. 200 6800 puttur-17,17 43 41,91,91,4 1 Heating kit with infra red bulb ( 200 watt capacity) RACBT-03,02,01,03 4 Nos 5750 23000 karwar-1,BIDAR-03 44 44,44,44 Heavy Duty Cutting Blow Pipe with Cutting Nozzles FAT-01,04,04 3 Nos 3800 11400 kookanuranur- 01,chitradurga- 01,nanjangud-01 45 6,6,10,6 Heavy duty screw driver 150 mm EBT-02,02,02,02 68 NOS 320 21760 bagalkote- 17,hadagali- 17,nalatwad- 17,Tiputtur-17 46 8,8 Heavy duty screw driver - 300MM EBT-05,05, 34 Nos. 290 9860 puttur-17,Tiputtur-17 47 22 Heavy duty screw driver 200 mm EBT-01 17 Nos. 200 3400 Puttur-17 48 139 Hermetic compressor 3 ton capacity RACAT-2 1 no. 56000 56000 BIDAR 49 31 Hihg rate discharge tester (cell tester) ABT-03 1 Nos. 3600 3600 Honnavara 50 94 Hole Punch Round 3mm, 4mm & 6mm Dia RACBT-1 4 No. 1285 5140 BIDAR 51 44,44 HSS twist drill 3 mm, 4mm and 6 mm (parallel shank) FBT-02,PMBT-02 6 Nos Each 600 3600 chitradurga- 03,kanakapura-03 52 20,20 Instrument file set: set of 6 Nos consisting of hand, square, warding, half round, 3 squares and round files.&the set kept in roged box EAT-02,02 6 Nos. 700 2800 BGK-4,PUT-2 53 4,4,4,4 Insulated handel thin connector screw driver 150 mm reputed co. Make. EBT-03,03,02,02 68 NOS 150 10200 Tiputtur-17,puttur- 17,17,Tiputtur-17 54 39,36,36,3 6 Knife folded Stainless steel - 150 mm FBT-05,RACAT- 01,02,03 19 Nos. 80 1520 nanjangud- 04,karwar-05,BIDAR- 10 55 42 Ladle 150 mm dia FBT-02 2Nos 900 1800 nanjangud 56 69,69,73 Lazy tong FBT-02,02,PMBT-02 6Nos. 2000 12000 bt centre-02, kookanuranur- 02,kanakapura-02 57 88 lead accid battery 12 Volt AAT-01 4 Nos 10900 43600 Honnavara Page 153 58 56,55,56,5 5,56,56,56, 56,56,55 Leather sleeves FAT- 01,03,03,04,01,03,0 4,01,FBT-04,04 160 Nos 350 56000 bt centre- 32,chitradurga- 64,nanjangud-64, 59 26 Left cut snips 250 mm FBT-02 4 Nos 400 1600 devarayasamudra 60 25,25,25,2 5,25,25 Leg vice 150 mm FAT- 01,03,04,01,04,03 6Nos. 15000 90000 nanjangud- 03,chitradurga-03 61 7,7 Long nose plier: 160mm,Taparia or equivalent EAT-02,02 8 Nos. 480 3840 bagalkote-4,puttur-4 62 8 Long nose pliers: 200mm half round jaws serrated gripping surface & side cutter capacity 1.66mm medium wire. - taparia or equivalent make. EBT-03 17 Nos. 480 8160 Puttur-17 63 59,29 Magnifying glass 75 mm dia FBT-01,04 6Nos. 300 1800 chitradurga- 02,nanjangud-04 64 15,57,57,5 7 Mallet EAT-02,EBT- 01,01,01 16 NOS 450 7200 bagalkote- 04,hadagali- 4,madikeri-4,puttur-4 65 97 Micron Vacuum gauge capable for reading upto 20 microns RACAT-01 4 Nos. 9000 36000 karwar 66 31,31 Mortice chisel 6mm EBT-01,01 34Nos 400 13600 bagalkote-17,puttur- 17 67 30,30,30 Mortice chisel 9mm EBT-01,01,01, 51 Nos. 390 19890 hadagali-17,puttur- 17,Tiputtur-17 68 52 Muffle furnace FBT-05 1No 26000 26000 nanjangud 69 54 Needle file st FBT-01 1No 1500 1500 bt centre 70 26 Number punch 6 mm and letter punch 6 mm FBT-04 1No 3400 3400 bt centre 71 29 Oil gun with flexible pipe ABT-06 1No 950 950 Honnavara 72 5,76 Ordinary wooden mallet 50 mm FBT-02,RACBT-01 34 NoS 150 5100 chitradurga- 17,BIDAR-17 73 19 Ouside spring caliper 200 mm FBT-03 2Nos 225 450 chitradurga 74 53,54,54,5 4,54 out fit spanner FAT-03,04,01,FBT- 04,04 40 NoS 500 20000 chitradurga- 32,nanjangud-08 75 21 Outside spring caliper 150 mm FBT-01 2Nos 175 350 nanjangud 76 48,48 Paint mixer FBT-05,05 2Nos 22000 44000 bt centre- 01,kookanuranur-01 77 5,5,5,5 Permanent magnet bar EBT-02,EBT- 02,02,02 32 nos 400 12800 mandya-4,Tiputtur- 4,madikeri-4,puttur-4 78 17 Petrol injector ABT-05 2 Nos. 1800 3600 Honnavara 79 25 Philip screw driver – complete set in leather case RACAT-3 5 set 850 4250 BIDAR 80 10,10,20,1 7,20,21,20 Picering plier 6-18 mm & reversing valve with access fitting RACAT- 01,02,RACBT- 05,06,03,04 20 Nos. 1845 36900 karwar-18,BIDAR-2 Page 154 81 18,18,18,3, 3,3.3.3.3.3. 3.3, Pincer EBT- 010,1,01,02,3,02,02, 03,02,03,02,03 188 Nos 450 84600 bagalkote-1,puttur- 17,Tiputtur- 17,17,17,mandya- 17,hadagali- 17,mandya-17,puttur- 17,17,madikeri- 17,17 82 9,16,10 Pinch of plier/crimping plier tool 6mm -18mm dia RACAT-02,RACBT- 06,06 11 Nos 850 9350 karwar 83 5,9,8,8,7,9 8 Pipe cutter miniature for copper tube 3mm to 16mm DIA RACAT- 2,4,3,5,6,RACAT-01 26 Nos 800 20800 BIDAR-21,karwar-5 84 128 Pipe threading die protection glae. RACBT-5 1 No. 12800 12800 BIDAR 85 87 Pipe wrench 40 Cm EBT-01 4 1200 4800 Gowribidanur-4 86 42 Pipe wrench size 50 mm to 150 mm RACAT-02 5 Nos 1800 9000 karwar 87 33 Piston ring filer ABT-05 2 Nos 9500 19000 Honnavara 88 119 Pitot tube and inclined tube manometer RACAT-2 2 no. 10000 20000 BIDAR 89 60 Planishing EBT-01 4 450 1800 HUVINAHADAGALI. 90 69 Planner 18" wooden RACBT-1 2 No. 4200 8400 BIDAR 91 73 Planner Wooden 9" RACBT-1 4 No. 1500 6000 BIDAR 92 139 Plumb weight 200g. RACBT-5 1 No. 165 165 BIDAR 93 90,138,168 Pop rivet gun. RACBT-3,5,FBT-02 4 Nos. 4500 18000 BIDAR- 02,chitradurga-02 94 68,64,69,1 3,13,13 Portable Electric drill (Single Phase) 6 MM Capacity PMBT-02,FBT- 02,04,EBT- 01,01,EBT-01 14 Nos 6700 93800 kanakapura-02,bt centre-02,nanjangud- 01,hadagali-3,PTUIR- 3,mandya-3 95 59,59,59,5 9 Portable sand / shot blasting equipment with blasting materials FBT-05,05,05,05 4 Nos. 28000 112000 kookanuranur- 01,BIDAR-01,bt centre- 01,chitradurga-01 96 56 Prick punch EBT-01 4 150 600 MADIKERI-4 97 7 Punch center,150mm ,reputed company make EBT-01 17 150 2550 Tiputturtur-17 98 58 Punch hole for cutting gasket, 4.7mm to 16mmDIA. RACBT-5 4 Nos. 1250 5000 BIDAR 99 33,33 Punch letter 4 mm and punch number 4mm FBT-02,PMBT-02 2 Sets 2900 5800 bt centre- 01,kanakapura-01 100 11 Punch letter 4 mm set EBT-01 1 No. 250 1000 Puttur-1 101 28 Punch Round 3mm,4mm & 6mm Dia FBT-02 4 Nos. 350 1400 kookanurNUR Page 155 102 29 Punch round 4mm Dia FBT-02 4 Nos. 100 400 kookanurNUR 103 30 Punch round 6mm Dia FBT-02 4 Nos. 100 400 kookanurNUR 104 44 Puncture repair equipment and vulcanising unit 230V, 55W Electrical/Steam ABT-06 1 set 8910 8910 Honnavara 105 71 Radius guage for metric pitches (0.5 to 7mm) PMBT-01 2 Nos 1800 3600 KGF 106 52,64,58,5 8,58,58 Raising hammer with hammer FBT-02,02,02,ABT- 02,PMBT-02,02 24 Nos 1200 28800 chitradurga- 04,HONVR-04,bt centre- 04,kanakapura- 04,holenarsipura- 04,kookanuranur-04 107 7,12 Ratchat Spanner of 6.4 sq. mm reversible RACAT-01,RACBT- 06 9 Nos. 750 6750 karwar 108 64,64,59 Rawl punch holder and bits (no 8,10,12,14) EBT-01,01,FBT-02 10 NOS 800 8000 madikeri-4,Tiputtur- 4,chitradurga-02 109 56 Reamer 6 mm to 13 mm by 1 mm FBT-01 1 No. 3000 3000 nanjangud 110 36,23,23,2 6 Reduction sleeve MT 0-1, 1-2, 2-3, FBT-01,03,PMBT- 04,04 4 Sets 1800 7200 chitradurga- 01,holenarsipura- 01,kanakapura- 01,nanjangud01 111 31,31,31 Rivet sets snap and dolly combined 3 mm, 4mm , 6 mm FBT-02,02,PMBT-02 12 sets 1800 21600 chitradurga- 04,kanakapura-04,bt centre-04 112 23,7,7,7,23 Rubber gloves EBT-02,04,05,05,02 67 NOS 400 26800 madikeri-8,puttur- 42,bagalkote-17 113 55,55,54,5 5 Rubber hose pipe black and red 5mm (in meters) FAT-04,03,03,FBT- 04 120Mtrs 160 19200 bt centre- 9chitradurga-30 114 9,11,12,9,9 ,9,9,10 Rubber mat EBT- 3,04,06,02,03,03,05, 06 92 NOS 1500 138000 mandya-12,nalatwad- 80 115 9,9,12 Rubber Mat 38"x18"x1 " EBT-03,05,06 4 NOS 5800 23200 haliyala-4 116 9 Rubber mat size 50''x25'' ( for panel board) EBT-05 01 no 700 700 Mandya 117 11,11,11,1 1,11,11,11 Rule 60 cm tow fold brass Tiputturped to read inches and mm FAT-03,04,01, 02,04,01,03,FBT-04 136Nos. 130 17680 bt centre bt centre- 68,chitradurga-68 118 1 Rule steel 15 cm (metric gruaduations) EBT-01 17 200 3400 Tiputturtur 119 1 Rule steel 30 cm (Metric) EBT-01 4 100 400 MADIKERI 120 2,2,35 Rule steel 60 cm EBT-01,01,01 12 NOS 200 2400 puttur-4,madikeri- 4,Gowribidnur-4 121 1,1,1,1,1,1 Rule wooden 4 fold EBT- 02,03,03,03,02,02 102 NOS 250 25500 hadagali-34,puttur- 34,Tiputtur-34 2420165 Draft approved by the Commissioner) Ruppes Twenty four lakhs twenty thousand one hundred and sixty five only Joint Director(Trg) for Commissioner Dept Of Employment & Training Page 156 NS-PKG-06 SL. No. DGET SL. No. DESCRIPTION OF THE ITEMS Module Code QTY REQD AS PER DGET Estimate d Cost Per Unit Total Estimated Cost 1 110 Scaper traingular blade removable 60 mm RACAT-01 2 Nos. 1650 3300 karwar 2 36,37 Scarper flat 15 cm: reputed company make EBT-01,01 8 NOS 340 2720 Tiputtur-4,hadagali-4 3 37,37,37 Scraper 3 corner 15 cm: reputed company make EBT-01,01,01 12 NOS 500 6000 madikeri-4,puttur- 4,Tiputtur-4 4 38 Scrapper 1 or 2 ( Half round & Traingular 200 mm) FBT-05 2 Nos. 3200 6400 nanjangud 5 4,4,4 Screen Welding Hand FAT-01,03,04 51 Nos. 1100 56100 kookanurNUR 6 3,3,3,3,3,3 Screen welding helmet type FAT- 01,03,01,03,04,FBT- 04 112Nos 1200 134400 bt centre- 17,chitradurga- 34,kookanuranur-51 7 2 Screw Driver 100mm 200mm FBT-06 17Nos 400 6800 nanjangud 8 24,24,24,2 4,24 Screw Driver 25 cm and 20 cm FAT-3,04,04,01,03 5Nos 600 3000 bt centre- 02,chitradurga-03 9 106 Screw copressor (open type) RACBT-06 1 No 65000 65000 karwar 10 8 Screw Driver EBT-01,01 34 NOS 220 7480 BGK-17,hadagali-17 11 10,10 Screw driver set EAT-02,02 22 NOS 500 11000 puttur-6,BGK-16 12 29 Screw driver, heavy duty 300 mm with handle PMBT-01 4Nos 325 1300 KGF 13 8 Screw driver,200mm,reputed company make EBT-01 17 Nos. 200 3400 Puttur 14 70 Screw driver250mm FBT-02 2 Nos. 250 500 devarayasamudra 15 3,3 Screw drivers assorted size: Toporia or equivalent EAT-02,02 4 NOS 1000 4000 puttur-2,bagalkote-2 16 67,70,51,5 1 Screw pitch gauge for metric pitches (0.5 to 6mm) FBT-03,01,EBT- 01,01 12Nos 2000 24000 madikeri-4,Tiputtur- 4,bt centre-4 17 2,2,6,2,2,6, 27,6,6,6,2, 2 Scriber EBT- 02,03,01,02,03,01,0 2,02,03,01,02,03 204 Nos 850 173400 bagalkote- 34,hadagali- 51,mandya- 17,nalatwad- 51,puttur-51 18 ,2,2, Scriber : 120 mm X 22mm N,EBT-02,03 68 NOS 500 34000 chitradurga- 34,madikeri-34 LIST OF TOOLS & EQUIPMENTS TO BE PROCURED UNDER SHOPPING FOR PROJECT I.T.I's Consignee Govt I.T.I Page 157 19 ,6 Scriber : 30 cm EBT-01,01 34 NOS 400 13600 chitradurga- 17,madikeri-17 20 18,18,18,1 8,10,10, Scriber 15 cm FAT-01,03,04,FBT- 04,02,PMBT-02,EBT- 01 119Nos 350 41650 kookanurNUR kookanuranur-51,bt centre- 34,kanakapura- 17,bagalkote-17 21 18,17 Scribing block universal 300 mm PMBT-01,05 4Nos 3300 13200 KGF 22 159 see through model of direct cooled refrigerator RACAT-1 1 no 66000 66000 BIDAR 23 160 see through model of frost free refrigerator RACAT-1 1 no 68000 68000 BIDAR 24 100,100 senor thermometer (digital) RACAT-1,2 10Nos 2400 24000 BIDAR 25 92,59,59 Setting hammer with handle EBT-01,01,01 12 NOS 540 6480 Gowribidnur-4,puttur- 4,Tiputtur-4 26 23 Shear Tinmans 300 mm PMBT-02 8 Nos. 1600 12800 holenarsipura 27 18,12,32 Sheet metal gauge ABT-02,FBT-02,05 7 Nos. 600 4200 HON-04,bt centre- 02,nanjangud-01 28 120 Shell & tube , DX chillers ( small) RACBT-05 1 No 59000 59000 karwar 29 48 Shell end mill dia 50-27 bore FBT-03 2 Nos. 29000 58000 nanjangud 30 49 Shell end mill dia 80-32 bore FBT-03 2 Nos. 27500 55000 nanjangud 31 62 Shock absorbers ABT-06 4 Nos 6300 25200 Honnavara 32 118,123 silver and copper brazing alloy rod for Ό” to 7/8” tube – Cu touch, cu to steel, cu to bra and appropriate fluxe RACAT-3,01 10 set 1250 12500 BIDAR-05,karwar-05 33 55 Sine Bar 200 mm PMBT-05 1 No 5400 5400 KANAKAPURA 34 54,47,53,7 6 Sling Psycrometer mounted on aluminium back, scale - 50 c to + 50 C RACBT- 04,04,06,RACAT-03 11 Nos 2525 27775 karwar-02 , BIDAR- 09 35 133 small capacity Shell and tube condenser RACAT-2 1 no. 49000 49000 BIDAR 36 61,61 Snip bent 25 cm EBT-01,01 8 NOS 400 3200 madikeri-4,putturUR- 4 37 58,58 Snip straight:-250mm EBT-01,01 8 NOS 400 3200 madikeri-4,puttur-4, 38 67,67,67,2 4 snipper sheet metal straight noe 200 mm RACAT- 2,01,03,PMBT-02 23 Nos. 1750 40250 BIDAR- 15,kanakapura-08 39 55,55 Soft hammer (brass,copper, lead, rubber and rawhide heads with handle)( 01 no each ) FBT-02,02 6 Nos 8000 48000 bt centre bt centre- 4,kookanuranur-02 40 46,46 Soldering copper hatchet type 500 gms FBT-02,02 16Nos 1800 28800 nanjangud08,kookan uranur-08 41 33,33,33,3 3 Spanner 12 mm and 15 mm double ended FBT-04,FAT-03-04- 01 16Nos 150 2400 devarayasamudra 42 34,34,34,2 4,34,33,17 Spanner D E 6mm to 15 mm by 1.5.mm FAT-01,01,04,FBT- 04,03,06,PMBT- 01,03 20Nos 3800 76000 bt centre- 01,kanakapura- 08,chitradurga- 9,kookanuranur-2, 43 11,19 Spanner double ended 4.7 mm to 16 mm RACAT-01,06 10 Set 700 7000 karwar 44 41 Spanner For Spark plug 14 mm AAT-01 02 Nos 180 360 Honnavara 45 13,13,13 Spark Lighter FAT-01,03,04 51 Nos 80 4080 kookanurNUR 46 31,32,32 Spindle blade Screw driver 100 mm PMBT-01,05,ABT-01 8 Nos 160 1280 kanakapura-06,HON- 02 Page 158 47 10 Spirit level 150mm EBT-01 4 Nos. 300 1200 Puttur 48 26,19,137, 22,27,19 Spirit level 200MM PMBT- 01,05,04,RACBT- 05,FBT-03,03 6 Nos 450 2700 kanakapura- 03,karwar- 01,nanjangud- 01,chitradurga-01 49 83,83,83,5 4,54,54 Spray Gun ( Painting) 500 ml PMBT-02,02,02,FBT- 05,05,05 6 Nos 350 2100 holenarsipura- 01,KGF- 01,kanakapura- 01,chitradurga- 01,nanjangud-01,bt centre-0 50 17,17,17,8 Square adjustable blade 15 cm FAT-01,03,04,EBT- 01 55 Nos 600 33000 kookanuranur- 51,madikeri-4 51 73 Square file 2nd cut 250 mm FBT-01 4 Nos 600 2400 nanjangud 52 2 Square try 15 cm EBT-01 17 Nos. 100 1700 Puttur 53 13,13,13 Stake round and Bottom FBT-02,02,PMBT-02 12Nos 2000 24000 kookanuranur- 04,nanjangud- 04,kanakapura-04 54 16 star Allen key AAT-03 4 Sets 1260 5040 Honnavara 55 74 steel Jack planner 9" RACBT-1 1 No. 2200 2200 BIDAR 56 15,15,15,1 5 Steel measuring tape 20 mtrs FBT-06,06,PMBT-03 3 Nos 1000 3000 chitradurga- 01,kanakapura- 01,nanjangud-01 57 11,11,11,5 6,18 Steel rule 60 cm FAT-01,03,04,FBT- 02,03 70Nos 80 5600 kookanurNUR 58 11 STEEL SQUARE450*600 PMBT-02 4 Nos 1200 4800 KANAKAPURA 59 38,38 Steel tape 182 cm flexible in case FBT-04,04 2 Nos 200 400 chitradurga- 01,nanjangud-01 60 24 straight edge steel 1 meter RACBT-1 1No. 18500 18500 BIDAR 61 23,25,3,3 Straight Edge steel 500 mm PMBT-05,FBT- 01,EBT-01,01 10 Nos 9000 90000 kanakapura- 01,nanjangud- 01,madikeri- 4,mandya-4 62 2 swaging tool, punch type, set of ize for tube 4.7mm to 16mm O.D. RACAT-3 5 set 5800 29000 BIDAR 63 T Slot cutters with parellel shank 17.5 X 8 X 8 mm PMBT 02 Nos 19000 38000 BELGAUM 64 85 Tap & die set Ό’’ to 5/8’’ SAE size RACAT-1 1 set 11000 11000 BIDAR 65 84 Tap set with matching drills Ό’’ to 5/8’’ RACAT-1 1 set 11000 11000 BIDAR 66 83,83,87,8 7 Tap set with matching drills 3 mm to 16 mm RACAT-01,01,01,02 4 SetS 14000 56000 karwar-01,BIDAR-03 67 52,52,52,5 2 Tape measuring 10 m graduation in mm RACAT-01,01,02,03 8 Nos. 300 2400 karwar karwar-02 , BIDAR- 06 68 32,32 Tape measuring 2 m graduation in mm RACAT-1,03 10 Nos. 124 1240 BIDAR Page 159 69 50,17,,17,4 8,48, Taps & dies complete set Metric, pitch M6 to M24 reputed company make EBT- 01,01,01,01,FBT- 01,PMBT-01 32 NOS 13000 416000 Gowribidnur- 4,mandya- 4,chitradurga- 4,Tiputtur- 4,kanakapura- 01,nanjangud-01 70 64,47,47 Telelscopic gauge 13 mm to 300 mm FBT-03,PMBT-04,04 3 Nos 18000 54000 nanjangud- 01,BELGM- 01,kanakapura-01 71 98 Thermostatic Exp. Valve RACBT-6 1 No. 5900 5900 BIDAR 72 39,39,39,3 9 tin mans square 60cmx30cm FAT- 04,03,01,FBT- 04 4 Nos 1200 4800 chitradurga- 03,nanjangud-01, 73 24,18,18 Tinmans Horse ABT-02,FBT- 02,PMBT-02 6 Nos 2270 13620 HON-02,nanjangud- 02,kanakapura-02 74 48,48 Trammel point (with beam 600 mm) FBT-02,02 2 Nos 4500 9000 bt centre bt centre- 01,nanjangud-01 75 19 Tri Square EAT-02 4Nos 450 1800 bagalkotealkot 76 32 Triangular file 4" EBT-01 17Nos 850 14450 Tiputturtur 77 2,,2,2 Trimming kit:- consist of anti static small screw driver set for fine tuneing communication receivers. (tuening of IFT,TRIMMERS, PADDERS) EAT-1,01,01,01 20 SETS 3000 60000 bagalkote- 8,chitradurga- 4,puttur-4,Tiputtur-4 78 61,61,61,6 1,61 Tripaning Tool 70 MM PMBT-02,02,02,FBT- 02,02 5 Nos 450 2250 kanakapura- 01,nanjangud- 01,holenarsipura- 01,BELGM-01,bt centre-01 79 66 Trowel medium FBT-02 1No 500 500 nanjangud 80 67 Trowel small FBT-02 1No 290 290 nanjangud 81 10,6,6,6,4, 6,4,4 Tweezer 10 cm stainless steel EBT- 03,04,05,06,04,03,0 5,06 136 NOS 110 14960 nalatwad-68,Tiputtur- 68 82 4,4,4,6,9,4, 4,4 Tweezers: stainless steel tweezer coated in anti - static pvc of length 150mm & have a fine points with serrations on inner surface of the Tiputturs EBT- 05,06,04,03,05,06,0 4,02,03,02,04,05,06 221 Nos. 200 44200 puttur-68,chitradurga- 85,bagalkote-68 83 29,29,29,3 2 Twist drill & drill chuks including keyless drill chuck PMBT-04,FBT- 03,03,03 4set 2000 8000 kanakapura- 01,chitradurga- 84 28 Twist drill taper shank set 12 to 20 mm in Step of 1 mm PMBT-04 2set 9500 19000 KANAKAPURA 85 42,42 Twist drills 3mm to 13 mm (parallel shank) by 1 mm FBT-01,PMBT-01 2set 4500 9000 chitradurga- 01,kanakapura-01 86 125,138,12 5, Two stage rotary vacuum pump capacity approx. 60 – 10rmp capable of evacuating to 50 microns of Hg and fitted with gas ballast, anti such back valve and single phase motor RACAT-2,01,02 3 Nos 67750 203250 BIDAR-01,karwar-02 Page 160 87 111 Two way manifold with gauges RACAT-01 2 Nos. 2800 5600 karwar 88 3,3 Tyre vulcanizing machine AAT-01,02 2 Nos. 8910 17820 Honnavara 89 6,6 Universal scribing block 22 cm EBT-01,01 8 Nos. 1000 8000 puttur-4,Tiputtur-4 90 45 Universal table angle plate PMBT-05 1No 30000 30000 KGF 91 14,17 V' block 100/7-80-A FBT-03,03 4 Nos 9000 36000 kookanuranur-02,bt centre-02 92 17 V block 63 mm fare with clamp FBT-03 2 Nos. 9000 18000 nanjangud 93 67,63 Valve grinding Tool Suction type AAT-01,02 12 Nos 180 2160 Honnavara 94 54 Valve spring compressor ABT-05 1 Nos 4500 4500 Honnavara 95 155 Vertex tube RACAT-1 2 no. 3000 6000 BIDAR 96 55 Vice bench jaw type 12 cm & 10cm: reputed company make EBT-01 4 Sets 8000 32000 Tiputturtur 97 42,42,42 Viscousity cup FBT-05,05,05 3 Nos. 5000 15000 bt centre- 01,kookanuranur- 01,nanjangud-01 98 13,13,13,1 3 Wall jumper 37x450mm PMBT-03,03,03,FBT- 06 4 Nos 275 1100 BELGM-01 chitradurga- 01,kanakapura- 01,holenarsipura-01 99 1,13,,,,10,1 0,6,6,6,11, 10,6,6,6 Watch maker screw driver set: watch maker screw drivers combining hardened steel shafts with nickle plated bodies & revolving heads, supplied in convinient plastic pouch,k flat balded parallel type sizes 0.6 to 2.5 mm EBT- 02,03,04,05,06,02,0 3,04,05,06,02,04,05, 06,06,02,03,04,05 340 NOS 450 153000 nalatwad-85,Tiputtur- 85,bagalkote- 85.chitradurga-85 100 89 Wheel cylinder AAT-02 4 Nos 9700 38800 Honnavara 101 ,52,,3 Wire gauge metric standard EBT-01,01,02,02 16 NOS 400 6400 chitradurga-8,puttur- 8, 102 6,1,1,1,1,2, 2,4,1,67 Wire insulation stripper for shinning conductor from 0.4mm to 4mm ABT-03,EBT- 02,04,05,06,02,05,0 6,02,01 118 Nos 240 28320 Honnavara- 17,hadagali- 55,nalatwad- 38,Tiputtur-8 103 1 Wire stripper 150 mm EBT-02 4 Nos 240 960 bagalkotealkot 104 67,68,67,6 7 Wire Stripper 20 Cm EBT-01,01,01,01 16 NOS 350 5600 hadagali-4,nalatwad- 4,puttur-4,mandya-4 105 ,1,1,1,1,1,1 ,1, Wire stripper: for strips PTFE wires between 0.5 to 4.5mm dia with clean and accurate cutting action. Supplied complete in its own storage are with bushes, two separate blades and an adjustable screw drives. EBT- 04,05,06,02,04,05,0 6,04,05,06,02, 123 300 36900 chitradurga- 17,madikeri- 55,puttur-51, 106 92,98 Wooden rule 450 mm FBT-02,PMBT-02 2 Nos 200 400 chitradurga- 01,holenarsipura-01 2972035 Draft approved by the Commissioner) for Commissioner Joint Director(Trg) Dept Of Employment & Training Rupees Twenty nine Lakhs and Seventy Two Thousand thirty five only Page 161 NS-PKG-07 SL. No. DGET SL. No. DESCRIPTION OF THE ITEMS Module Code QTY REQD AS PER DGET Estimate d Cost Per Unit Total Estimated Cost 1 15,15,15 Safety Boots for Welders Pair FAT-01,03,04 51Nos. 1800 91800 kookanurNUR 2 86,81,84, 74 Welding CDS (processes and inspection methods) FAT-01,03,04, FBT-04 16 Nos 64000 1024000 BT Centre- 4,devarayasamudra, 04 kookanuranur 04,Nanjangud-04 3 77 Oxygen acetylene argon & CO2 cyclinder STANDARD SIZE ISI STANDARD FBT-04 8 Nos 45000 360000 BT Centre- 2,devarayasamudra, 02 kookanuranur 02,Nanjangud-02 4 71 Welding helmets With IS standard FBT-04 64 Nos 3300 211200 BT Centre- 16,devarayasamudra ,16 kookanuranur 16,Nanjangud-16 5 76,79,79 IIW/ASTM reference radiograph standard FAT-03,04,01 12 Nos 12000 144000 BT Centre- 03,devarayasamudra ,03 kookanuranur 03,Nanjangud-03 6 89 Carbon arc gouging torch 300A FAT-03 4 Nos 23400 93600 BT Centre- 01,devarayasamudra ,01 kookanuranur 01,Nanjangud-01 7 51,50,51,5 1,51 Tiputtur cleaner FAT- 04,03,01,01,FBT-04 40Nos 200 8000 chitradurga- 24,kookanuranur- 08,nanjangud-08 8 14 Tong bolt 300, 500, 1000, 1500 mm FBT-05 6 Nos 12000 72000 chitradurga 9 16 Tong flat 300, 500, 1000, 1500 mm FBT-05 6 Nos 12000 72000 chitradurga 10 18,18 Tong hollow bit 300, 500, 1000, 1500 mm FBT-05,05 12 Nos 12000 144000 chitradurga- 06,kookanuranur-06 11 17 Tong round 300, 500, 1000, 1500 mm FBT-05 6 Nos 12000 72000 chitradurga 12 15 Tong side 300, 500, 1000, 1500 mm FBT-05 6 Nos 12000 72000 chitradurga 13 19,19,19,1 9 Tongs Holding 30 cm FAT-01,03,04, FBT- 04 68Nos 1300 88400 kookanuranur- 51,nanjangud-17 14 30,30,30,3 0,30,30,30 Weld measuing gauge fillet and butt FBT-04,FAT- 01,04,03,04,03,01 14 Nos 3500 49000 nanjangud- 08,chitradurga-06 15 46 Welding rubber hose, oxygen and acetylele 8 mm FBT-04 100 Mtr 180 18000 chitradurga 16 43,43 Whiping materials (white kerosene/methylene) FBT-05,05 10 Ltr 150 1500 bt centre-5Ltr, nanjangud-5Ltr 17 2,2 Wing Divider 200 mm PMBT-02,FBT-02 34 Nos 225 7650 holenarsipura- 17,kookanuranur-17 Consignee Govt I.T.I LIST OF TOOLS & EQUIPMENTS TO BE PROCURED UNDER SHOPPING FOR PROJECT I.T.I's Page 162 18 20,20,20, Wire Brush (SS) FAT-01,03,04 51 Nos 225 11475 kookanurNUR 19 12,12,12 Wire Brush (MS) FAT-01,03,04 51 Nos 170 8670 kookanurNUR 2549295 Draft approved by the Commissioner) Dept Of Employment & Training Joint Director(Trg) for Commissioner Rupees twenty five lakhs forty nine thousand two hundred & ninety five only Page 163 NS-PKG-08 SL. No. DGET SL. No. DESCRIPTION OF THE ITEMS Module Code QTY REQD AS PER DGET Estimate d Cost Per Unit Total Estimated Cost 1 46,46,46,6 3,63 Bevel gauge 200 mm PMBT-03, 04, 04,04,FBT-03 05 Nos 1000 5000 BELGM- 02,nanjangud- 01,kookanuranur- 01,holenarsipura-01 NO. 2 25,31,25,2 5,31 Combination set 300 mm FBT-03,01,03,03,01 7 Nos 23000 161000 bt centre- 01,chitradurga- 03,nanjangud- 01,kookanuranur-02 3 65,63,63,5 6 Compound dial gauge with stand (metric) FBT-03,03,03,PMBT- 05 4Nos 18000 72000 nanjangud-01,KAN- 01,chitradurga- 01,kookanuranur-01 4 106 D.E .Grinder Pedestal motorized 200 mm RACBT-1 1 No. 43900 43900 BIDAR 5 64,68,66,6 8 DE grinder 30 cm wheel motorized pedestal type FBT-04,FAT- 01,03,04 4Nos 65000 260000 nanjangud- 01,chitradurga-03 6 69 Dial gauge stand FBT-01 4Nos 7500 30000 nanjangud 7 66,35 Dial test indicator with magnetic base FBT-03,ABT-06 2 No. 12200 24400 bt centre-01,HONR- 01 8 80 DIGITAL micrometer (0-25mm) Out Side ABT-01 1 Nos 5400 5400 Honnavara 9 60,70,58,6 0,64 Direct reading Vernier caliper 0-300 mm ABT-01, FBT-03,03, 03,01 11 Nos. 12600 138600 HONR- 04,chitradurga-05,bt centre-01,nanjangud- 01 10 72,85 Disk Brake with caliper assembly AAT-02,01 04 Nos 23600 94400 Honnavara 11 77 Distributor AAT-01 2 Nos 19800 39600 Honnavara 12 76,76,74 Dye penetrant testing kit FAT-01,04,03 6 Nos 20000 120000 chitradurga 13 4,4,4,37,4 Plate surface 45 x 45 Cm EBT- 01,01,01,01,EBT-01 20 NOS 14500 290000 hadagali-4,madikeri- 4,puttur- 4,Gowribidnur- 4,mandya-4. 14 80 Fuel feed pump ABT-05 1 Nos 16300 16300 Honnavara 15 79,79,74 Light General purpose portable forge having dia of 450mm with hand blower mounted on tripod stand PMBT-02,02,FBT- 02, 6Nos. 40000 240000 holenarsipura-02, nanjangud- 02,kanakapura-02 17 43 Micrometer 0-2.5 mm inside: Mitutoyo EBT-01 4 Nos 2100 8400 Tiputturtur 18 45,50,55,6 0,43,76 Micrometer 0-25 mm outside : Mitutoyo or equivalent EBT-01,01,01, PMBT-02,FBT- 03,01,01 21 NOS 6200 130200 Tiputtur- 04,holenarsipura- 01,kookanuranur- 08,Mandya- 04,Gowribidanur-04 LIST OF TOOLS & EQUIPMENTS TO BE PROCURED UNDER SHOPPING FOR PROJECT I.T.I's Consignee Govt I.T.I Page 164 19 47,47,47,4 7 Micrometer 25-50 mm inside with extension rod EBT-01,01,01,01 16 NOS 8000 128000 madikeri-4,haliyala- 4,puttur-4,Tiputtur-4. 20 44,44,61,5 8 Micrometer 25-50 mm outside: Mitutoyo or equivalent EBT-01,01,FBT- 01,03 14 NOS 6100 85400 Tiputtur-4,hadagali- 4,chitradurga-06 21 79,46,62 Micrometer 50-75 mm outside EBT-01,01,FBT-01 10 NOS 8850 88500 Gowribidnur- 4,Tiputtur- 4,chitradurga-2 24 53,66,66,4 5,83,50, Vernier bevel protractor with 150 mm blade With least count of 5 Min PMBT-05,01,04,FBT- 01,EBT-01,01,01 16 Nos 22000 352000 holenarsipura- 03,chitradurga- 01,Gowribidnur- 4,mandya- 4,chitradurga-4, 25 48,48,48 Vernier calipeer 20 cm : Mitutoyo EBT-01,01,01 12 NOS 7000 84000 Tiputtur-4,mandya- 4,hadagali-4. 26 49,49 Vernier Caliper (0mm -150mm) least count of .02 mm FBT-02,PMBT-02 2 Nos. 6500 13000 chitradurga- 01,kanakapura-01 27 88 Vernier caliper length 250 mm RACAT-01 1 No 9000 9000 karwar 28 52 Vernier gear tooth caliper PMBT-05, 1 No. 13500 13500 holenarsipura 29 51,65,51,4 4,82,49,49 Vernier Height 300mm PMBT- 05,05,04,01,EBT- 01,01,01 16 Nos 21288 340608 kanakapura- 01,holenarsipura- 03,Gowribidnur- 4,Tiputtur-4,mandya- 4 2967208 Draft approved by the Commissioner) Rupees Twenty nine lakhs sixty seven thousand two hundred and eight only Dept Of Employment & Training Joint Director(Trg) for Commissioner Page 165 NS-PKG-09 SL. No. DGET SL. No. DESCRIPTION OF THE ITEMS Module Code QTY REQD AS PER DGET Estimate d Cost Per Unit Total Estimated Cost 1 53,140,84 Air compressor, two stage for oil - less dry air, with rush proof tank assembly, heater & controls max. pr. 10kg/sq.cm. Capacity 45 liter, motor 1 hp. RACBT-5,6,RACT- 01 3 No. 63000 189000 BIDAR-02, karwar-01 NO. 2 ######### Cut section of semi-harmetic screw compressor RACBT-04,02,04 3 Nos 48900 146700 karwarWR- 02,BIDAR-01 3 129,137 Reciprocating compressor with provision of capacity control etc. for demonstration. Capacity 9000Kcal/hr. emi hermetic open type. RACAT-2,3 2 Nos 175000 350000 BIDAR 5 103 Cut Section of Hermetic Scroll Compressor 1/2 HP capacity ISO approved. RACBT-VI 2 Nos 44000 88000 karwar -01, BIDAR- 1 6 89 Condensing unit of 01 Ton capacity(3000 K-cal/hr) open type compressor with Aditional prime mover motor required capacity fly wheel , puller & belt arrangement to drive compressor & Receiver tank with EVAPORATIVE CONDENSER construction for demonstation with all controls. Evaporative condensor consists of condenser coil pump & pipe line arrangement, Nozzles for water spray on condenser coil top fan arrangement to draw air over condenser. ISO approved. RACBT-VI 2 Nos 85000 170000 karwar -01, BIDAR-1 7 88 Condensing unit consist of 01 Ton capacity (3000 k-cal/hr) open type compressor with fly wheel, additional motor for driving compressor with puller, coupler & belts arrangement with Air cooled condenser & receiver tank. ISO approved. RACBT-VI 2 Nos 85000 170000 karwar -01, BIDAR- 1 Consignee Govt I.T.I LIST OF TOOLS & EQUIPMENTS TO BE PROCURED UNDER SHOPPING FOR PROJECT I.T.I's Page 166 8 15 Granite Surface plate 630 mm x 630 mm grade 1 ISO approved. RACBT-I,AAT-02 8 Nos. 22500 180000 karwar -04, BIDAR- 04 9 15,15,15 Granite surface plate 1000mmx630mm grade workshop,MMTM make or Equivalent ISO approved. PMBT-01,ABT-01,FBT- 01,FBT-03 40 Nos. 40500 1620000 KGF-4, BELGM- 4,kanakapuraPR- 4,holenarsipuraA-4, bt centre-4,DVR- 4,kookanur- 4,nanjangudJ-4, Honnavara-8 2913700 Draft approved by the Commissioner) Joint Director(Trg) for Commissioner Ruppes twenty nine lakhs thirteen thousand seven hundred only Dept Of Employment & Training Page 167 NS-PKG-10 SL. No. DGET SL. No. DESCRIPTION OF THE ITEMS Module Code QTY REQD AS PER DGET Estimate d Cost Per Unit Total Estimated Cost 1 65,82 Impact testing machine Impact Testing Machine Max capacity 175 joule Minmum scale graduation 2J with standared attachment accessores, caliper gauge, templete for checking 10*10mm, dept notch gauge, izod support for dia 0.45round specimen, or equalient ,With IS standard FBT-05,01 8 Nos 278000 2224000 bt centre-2, DVR-2, kookanur-2, nanjangudJ-2 2 61 Brinell hardness testing machine Test force min 250kgf to 3000 kgf appox,with accessories & brinell microscope, ISO approved. FBT-05 4 Nos 390000 1560000 KGF-1, BELGM-1, kanakapura- 1,holenarsipura-1 3 63 Rockwell hardness testing machine with ABC scale lead 60, 100 and 150 kgs FBT-05 1 No. 115000 115000 nanjangud 3899000 Draft approved by the Commissioner) NS-PKG-11 SL. No. DGET SL. No. DESCRIPTION OF THE ITEMS Module Code QTY REQD AS PER DGET Estimate d Cost Per Unit Total Estimated Cost 1 50,49,50, 50 Pressure regulator acetylene Regulators FAT-01,03,04, FBT-04 32 Nos 15600 1996800 bt centre-32, DVR- 32, kookanur-32, nanjangudJ-32 2 50,49,48,4 9 Pressure regulator oxygen double stage FBT-04, FAT- 01,03,04 32 Nos 12600 1612800 bt centre-32, DVR- 32, kookanur-32, nanjangudJ-32 3609600 Draft approved by the Commissioner) for Commissioner Consignee Govt I.T.I Sd/- Joint Director(Trg) LIST OF TOOLS & EQUIPMENTS TO BE PROCURED UNDER SHOPPING FOR PROJECT I.T.I's LIST OF TOOLS & EQUIPMENTS TO BE PROCURED UNDER SHOPPING FOR PROJECT I.T.I's Rupees Thirty eight lakhs ninety nine thousand only Rupees Thirty six lakhs nine thousand six hundred only Dept Of Employment & Training Joint Director(Trg) for Commissioner Consignee Govt I.T.I Dept Of Employment & Training Page 168 NS-PKG-12 SL. No. DGET SL. No. DESCRIPTION OF THE ITEMS Module Code QTY REQD AS PER DGET Estimate d Cost Per Unit Total Estimated Cost 1 57,56,57, 57 Transformer welding set with all accessories 300 A. FAT-01,03,04, FBT-04 32 Nos. 72000 2304000 bt centre-08, DVR- 08, kookanur-08, nanjangudJ-08 2 40,40 Welding torch with 10 nozzles. FBT-04, FAT-01 48 sets 19000 912000 bt centre-12, DVR- 12, kookanur-12, nanjangudJ-12 3 5 Tyre pressure gauge with accessories-wall type with hoses and connecting nipples - Pyramid machine tools make or equivalent AAT-02 1 set 79560 79560 honnavara 4 ######## Triple leg grip puller with bearings attachments screw hydrolic powered maximum spread 80,160,250,450,mm ABT-06, AAT-01, AAT-03 3 Nos 78000 234000 honnavara 5 47 Pneumatic rivet gun PMBT-02 8 Nos. 31365 250920 KGF-2,BELGM-2, kanakapura-2, holenarsipura-2 3780480 Draft approved by the Commissioner) LIST OF TOOLS & EQUIPMENTS TO BE PROCURED UNDER SHOPPING FOR PROJECT I.T.I's Joint Director(Trg) for Commissioner Consignee Govt I.T.I Dept Of Employment & Training Rupees Thirty seven Lakhs eighty thousand four hundred and eighty only Page 169 NS-PKG-13 SL. No. DGET SL. No. DESCRIPTION OF THE ITEMS Module Code QTY REQD AS PER DGET Estimate d Cost Per Unit Total Estimated Cost 1 86 Liquified petroleum Gas(LPG) cylinder, regulator and Torch with burner -Indian / HP / Bharath or Equivillant ABT-02,FBT- 02,PMBT-02,RACAT- 01,02,03 22 Nos. 49000 1078000 nanjangudJ-01, Honnavara-20 2 53,74,77, 77 Magnetic [particle testing machine working 230v/50 hz single phase. FBT-05, FAT- 03,04,01 16 Nos. 105000 1680000 bt centre-04, DVR- 04, kookanur-04, nanjangudJ-04 3 57,69,63,6 3 Depth Micrometer 0-150mm Mitutoyo make or Equivillant RACBT-1, ABT-01, PMBT-01,FBT-01 88 Nos. 11500 1012000 bt centre-08, DVR- 08, kookanur-08, nanjangudJ-08,KGF- 08,BELGM-08, kanakapura-08, holenarsipura-08, karwar-08,BDR-08, holenarsipura-08 4 69 Taper gauge M T No.1,2,3,4, & 5(MASTER) FBT-03 1No 74000 74000 nanjangud 5 8,8 Toe-in Toe-out gauge AAT-02,01 2 Nos 45630 91260 Honnavara 3935260 Draft approved by the Commissioner) Consignee Govt I.T.I LIST OF TOOLS & EQUIPMENTS TO BE PROCURED UNDER SHOPPING FOR PROJECT I.T.I's Dept Of Employment & Training Joint Director(Trg) for Commissioner Rupees thirty nine lakhs thirty five thousand two hundred and sixty only Page 170 NS-PKG-14 SL. No. DGET SL. No. DESCRIPTION OF THE ITEMS Module Code QTY REQD AS PER DGET Estimate d Cost Per Unit Total Estimated Cost 1 ######### Welding Transformer (200 to 400 amps) - Air Cooled with following Accessories a) 6 meter cable (2 length) b) Electrode holder (copper) -1 no. c) Earth clamp - 1 no. d) Lugs - 4 Nos . RACBT-I,ABT- 02,PMBT-02 14 Nos 72000 1008000 holenarsipura-02, KGF-02,BELGM-02, kanakapura-2, holenarsipura-02, karwar-02,BDR-02 2 43,43,42,4 3 Cutting torch oxy-aceteline with set of cutting nozzles FBT-04, FAT-01-04 32 Sets 29600 947200 bt centre-08, DVR- 08, kookanur-08, nanjangudJ-08 3 80,86 Circlar cutting machine 300mmdia ISO approved. FBT-02,PMBT-02 8 Nos 117000 936000 bt centre-01, DVR- 01, kookanur-01, nanjangudJ-01,KGF- 1,BELGM-1, kanakapura-1, holenarsipura-1 4 73, 67,60,13 Sensitive Drilling machine pillar 12 mm capacity with accessories Motor required capacity, pulley, starter, Drill chuck, Arbor etc., FBT-01, RACBT-I, AAT-03,ECBT-01 12 Nos. 23000 276000 bt centre-02, DVR- 02, kookanur-02, nanjangudJ- 02,karwar-02,BDR- 02 5 71 Brake lining riveting machine -Standard make(Pnuematic) ABT-06 1 No 144000 144000 Honnavara-01 3311200 Draft approved by the Commissioner) Consignee Govt I.T.I Rupees thirty three lakhs eleven thousand and two hundred only LIST OF TOOLS & EQUIPMENTS TO BE PROCURED UNDER SHOPPING FOR PROJECT I.T.I's for Commissioner Dept Of Employment & Training Joint Director(Trg) Page 171 NS-PKG-15 SL. No. DGET SL. No. DESCRIPTION OF THE ITEMS Module Code QTY REQD AS PER DGET Estimate d Cost Per Unit Total Estimated Cost 1 75,75,85,8 0,68 Drilling machine pillar 20mm cap.with chuck and key HMT make or Equivalent. PMBT-01,FBT- 01,ABT-01, RACBT- V,I 13 Nos. 69300 900900 Honnavara-01 KGF- 1,BELGM-1, kanakapura-1, holenarsipura-1,bt centre-01, DVR-01, kookanur-01, nanjangudJ-01,02, 2 94,100,100 Portable pneumatic shear FBT-02,ABT- 02,PMBT-02 14 Nos. 63000 882000 Honnavara-02,KGF- 1,BELGM-1, kanakapura-1, holenarsipura-1,bt centre-02, DVR-02, kookanur-02, nanjangudJ-02,, 3 6,7 Wheel alignment gauge -computerised laser beam type- standard make. AAT-02,02 2 set 380000 760000 Honnavara-02, 4 95,101 Pipe bending machine hydraulic type 12mmto 25mm Dia FBT-02,PMBT-02 8 Nos. 82000 656000 KGF-1,BELGM-1, kanakapura-1, holenarsipura-1,bt centre-01, DVR-01, kookanur-01, nanjangudJ-01,, 5 74,55,66,9 2 Pedestal grinder, double ended with 180 x 31.75 x 25 mm (fabricated ms stand). FBT-03,01, PMBT- 04, 05, RACBT- 01,AAT-01 24 Nos 24030 576720 KGF-4,BELGM-4, kanakapura-4, holenarsipura-4,bt centre-02, DVR-02, kookanur-02, nanjangudJ-02,, 3775620 Draft approved by the Commissioner) Consignee Govt I.T.I LIST OF TOOLS & EQUIPMENTS TO BE PROCURED UNDER SHOPPING FOR PROJECT I.T.I's Joint Director(Trg) for Commissioner Dept Of Employment & Training Rupees Thirty seven lakhs seventy five thousand six hundred and twenty only Page 172 NS-PKG-16 SL. No. DGET SL. No. DESCRIPTION OF THE ITEMS Module Code QTY REQD AS PER DGET PER ITI Estimate d Cost Per Unit Total Estimated Cost 1 68 3 pin micro meter 12-20mm least count 0.01mm. FBT-03 08 Sets 81000 648000 bt centre-02, DVR- 02, kookanur-02, nanjangudJ-02,, 2 53 3 pin micrometer 12-20 mm , 20-40 mm Mitutoyo make or Equivalent PMBT-04 8 sets 242000 1936000 KGF-2,BELGM-2, kanakapura-2, holenarsipura-2 3 57,70,65,8 1 Cylinder bore gauge capacity 18-35 , 35-60 , 50- 150 mm -Mitutoyo make or Equivalent ABT-05,AAT-01,02, ABT-01 6 Nos 82000 492000 Honnavara-06 4 62 Limit plug gauges 5mm to 25mm by 5mm range PMBT-05 4 set 94000 376000 KGF-1,BELGM-1, kanakapura-1, holenarsipura-1 5 80,92,98 Bearing puller screw Powered with Hydraulic powered with attachment max spread 80,200 and 300mm. AAT-01-03 4 Nos. 69000 276000 Honnavara-04 6 43,33 Torque wrench set of 3 Nos.5-35 Nm , 14-68 Nm , 50-220Nm , set of 3 Nos. Taparia make or Equivalant ABT-05,06 2 Nos 66000 132000 Honnavara-02 3860000 Draft approved by the Commissioner) Dept Of Employment & Training Joint Director(Trg) LIST OF TOOLS & EQUIPMENTS TO BE PROCURED UNDER SHOPPING FOR PROJECT I.T.I's for Commissioner Consignee Govt I.T.I Rupees thirty eight lakhs sixty thousands only Page 173 NS-PKG-17 SL. No. DGET SL. No. DESCRIPTION OF THE ITEMS Module Code QTY REQD AS PER DGET Estimate d Cost Per Unit Total Estimated Cost 1 3 Tool presetting chitradurgaice with digital readout for measuring length and radius with all accessories. PMAT-01 4No. 2860000 Honnavara 2 99,99 Portable nibbler PMBT-02, ABT-02 6 Nos. 58000 348000 Honnavara-1, KGF- 1, BELGM-1, kanakapura-1, holenarsipura-1 3 66,4,6 Air Compressor -stationary, single stage , 2 cyl. 2Hp, 240 Lpm, 9 Kg /cz, 160 ltr cap. ABT-06, AAT-02, PMBT-06 , FBT-02 7 Nos 59040 413280 nanjangudJ-01, HONVRA-2,KGF-1, BELGM- 1,kanakapuraPR- 1,holenarsipura-1 4 62 Lever Type dial gauge along with magnetic stand and clamping arrangement with box MITUTOYA or Equivalent make RACBT-I 8 Nos. 33000 264000 karwar-04, BDR-04 3885280 Draft approved by the Commissioner) for Commissioner Dept Of Employment & Training Joint Director(Trg) LIST OF TOOLS & EQUIPMENTS TO BE PROCURED UNDER SHOPPING FOR PROJECT I.T.I's Consignee Govt I.T.I Rupees Thirty eight Lakhs eighty five thousand two hundred and eighty only Page 174 NS-PKG-18 SL. No. DGET SL. No. DESCRIPTION OF THE ITEMS Module Code QTY REQD AS PER DGET Estimate d Cost Per Unit Total Estimated Cost 1 36,39,25,3 9,37,39 Solid parallels in pairs(Different sizes) in metric100x10x5 mm, 100x15x5mm , 150x10x6 mm,150x15x6 mm , 150x20x10 mm , 150x20x15mm, 200x20x15mm , 200x25x15 mm , 200x30x25 mm , 200x30x20mm , 250x25x20 mm , 250x30x20mm . RACBT-01,FBT- 01,03, PMBT-01,05, ABT-01 19 SET 59400 1128600 Honnavara-1, KGF- 2, BELGM-2, kanakapura-2, holenarsipura-2,bt centre-02, DVR-02, kookanur-02, nanjangudJ- 02,,karwar-01, BDR- 01 2 44,43 Chain and pully block 3000 kg capacity electric type AAT-01,02 2 Nos 288000 576000 Honnavara 3 97 Engine analyzer. AAT-01 1 No. 560000 560000 Honnavara 4 73 Engine scanner-with all atttachments and accessories-Sunmake,launch or equivalent. AAT-03 1 No. 913750 913750 Honnavara 5 95 Injector dismantling jig - Standard make ABT-05 1 no 33400 33400 Honnavara 6 94 Injector testing set(hand operated) - Standard make ABT-05 1 no 36400 36400 Honnavara 7 54 Protable crance hydraulically operated hook lifting capacity 1 Ton -Standard make ABT-06 01 no 110000 110000 Honnavara 8 2 Tyre remover pneumatic type--Standard make AAT-02 1 set 163000 163000 Honnavara 9 154 Working model of a car AC . Complete kit a) Wobble plate compressor with mounting brackets b) Serpentive Evaporator c) Parallel flow condenser d) Hoses, tubes , receiver, Expansion valve e) Electrical components & wiring harness & other required accessories. ISO approved. RACAT-01 2 no 180000 360000 karwar -1, BDR-1 3881150 Draft approved by the Commissioner) LIST OF TOOLS & EQUIPMENTS TO BE PROCURED UNDER SHOPPING FOR PROJECT I.T.I's Dept Of Employment & Training Rupees Thirty eight lakhs eighty one thousand one hundred fifty only Consignee Govt I.T.I Joint Director(Trg) for Commissioner Page 175 NS-PKG-19 SL. No. DGET SL. No. DESCRIPTION OF THE ITEMS Module Code QTY REQD AS PER DGET Estimate d Cost Per Unit Total Estimated Cost 1 92,90 C.V. Joint units of 3 types- Maruti/Santro/Hyundai ISO approved. AAT-01,02 8 sets 63000 504000 Honnavara 2 11 Fuel injection pump test bench with accessories 1 No 400000 400000 Honnavara 3 87,86 Tandem master cylinder with booster Specification:- For LMV Vehicle(Diesel) ISO approved. AAT-02,01 8 Nos. 112000 896000 Honnavara 4 77 Fuel injection pump – pneumatic governor, RQC governor and RSV governor Specification:-pneumatic governor P6 EngineA brand new in line fuel injection pump suitable for 4 cylinder diesel engine. Complete with RQV mechanical governor, stop and control lever. The pump should be with original equipments and tested OK by manufacturer. RSV -Mico make or equivalent set of 2 Nos. ISO approved. AAT-02 2 Sets 158000 316000 Honnavara 5 59 Starter motor, alternator, dynamo cut out Starter motor Specifications: Suitable for LMVtype Free engagement12 VoltAlternatorSpecifications: SUITABLE FOR LMV12 Volt40 amp DynamoSpecifications:SUITABLE FOR LMV 12 Volt22 Amp set of 1 No each. ISO approved. AAT-03 2 sets 110000 220000 Honnavara 6 87 Cut model of 4 stroke diesel engine on stand Maruti/Toyota/Hindustan/PAL or Eqvillant ISO approved. ABT-05 1 No. 244000 244000 Honnavara 7 69 Vacuum assisted hydraulic brake assembly (Model) -Tata make or Eqvillant ABT-06 1 No 162000 162000 Honnavara 8 85 Cut model of 4 stroke petrol engine on stand - Maruti/Santro /Ford /Toyota/Chavarlet or Eqvillant ISO approved. ABT-05 1 No. 165000 165000 Honnavara 9 70 Air brake assembly (Model) -Ashoka Leyland / Tata make or Equivalent ISO approved. ABT-06 1 No 162900 162900 Honnavara LIST OF TOOLS & EQUIPMENTS TO BE PROCURED UNDER SHOPPING FOR PROJECT I.T.I's Consignee Govt I.T.I Page 176 10 72 Hydraulic brake assembly(Brake paedal, booster, Tandem master cylinder, wheel cylinder, brake drum-mock up assembly (Model) -Ashoka Leyland / Tata make or Equivalent ISO approved. ABT-06 1 No 95200 95200 Honnavara 11 79 Fuel injection pump one with pneumatic governor, one with RQ governor and one with R.S.V.governor -New Mico make or Equivalent ISO approved. ABT-05 1 Set 86900 86900 Honnavara 12 60 Conventional front axle assembly & I.S.F. wheel assembly (Model) -TATA/ Leyland make or Eqvillent ISO approved. ABT-06 1 No. 86000 86000 Honnavara 13 20 Cut-section model of differential assembly - Mahindra / Hindustan make or Equivalent- TATA /LEYLAND make or Equivalent ISO approved. ABT-06 1 No. 84000 84000 Honnavara 14 50 Carburetor(two different types) NEW latest ISO approved. ABT-05 2 Nos 33703 67406 Honnavara 15 73 wall charts of Automobile Engg ABT-06 1 Set 38000 38000 Honnavara 16 7 Working model of lift PMAT-03 4 Set 34000 136000 KGF-1,BELGM-1, kanakapura-1, holenarsipura-1 3663406 Draft approved by the Commissioner) Rupees Thirty six lakhs sixty three thousand four hundred and six only Dept Of Employment & Training for Commissioner Joint Director(Trg) Page 177 NS-PKG-20 SL. No. DGET SL. No. DESCRIPTION OF THE ITEMS Module Code QTY REQD AS PER DGET Estimate d Cost Per Unit Total Estimated Cost 1 85 Diapragm type clutch assembly Specification:- SUITABLE FOR LMV TYPE(Diesel) ISO approved. AAT-02 2 Nos. 33065 66130 Honnavara 2 83 Petrol engine (2 stroke) of different makes in running condition -Bajaj/TVS or Eqvillant ABT-05 1 Set 40800 40800 Honnavara 3 102 STEARING & SUSPENSION SYSTEM (LJT make) This module provides a hardware trainer that is based on the real automotive components found in a typical front-end steering and suspension system. This includes front wheel assemblies, MacPherson strut and coil spring assemblies, road wheels and power steering rack. The unit is mounted on a steel frame fitted with solid rubber castors and a single-phase electric motor is used to power the power steering pump that is connected to the power rack using the correct hydraulic hoses.A complete steering wheel and column assembly is also fitted to the unit to allow the student to perform a full range of tests on the system. To aid in this the unit is fitted with a manually operated suspension loading system that enables the student to simulate the typical loaded conditions of a front-end suspension system. The module has been designed to allow the student to practically investigate all the principles and operations of a frontwheel drive, steering and suspension system. Typical topic areas include Steering system fundamentals, Suspension system fundamentals, Steering column assemblies, Rack and pinion steering gear operation, Tie rod ends, Power steering fluid, Power steering pumps and related hardware, Coil springs, Upper and lower control arms, Strut rods, Steering knuckle assemblies, Shock absorbers. Maruthi or Equivalent model AAT-02 1 No. H Consignee Govt I.T.I LIST OF TOOLS & EQUIPMENTS TO BE PROCURED UNDER SHOPPING FOR PROJECT I.T.I's Page 178 4 85 Disk brake with caliper assembly (LJT MAKE/ Equivalent) Specification:- Disc brake assembly is mounted on sturdy stand. The assembly consists of bellow stated parts to make it working model.The equipment is supplied duly painted with a pre defined colour codes for better understanding.(1) Tandem master cylinder(2) Wheel cylinder(3) Brake drum assembly(4) Brake light unit in working condition(5) Disc brake assembly(6) Brake pad(7) Brake pipe line(8) Suitable Electrical motor with Reduction Gear box assembly.(With V belt pulley drive)(9) Brake CaliperRequired parts provided to make it complete working model.With suitable stand. Disc and Drum Brake Systems : This module shall consist of a hardware trainer based on the real automotive components found in a front / rear disc and drum braking system. This must include a pair of front wheel hubs with disc rotors and calipers mounted on a rigid steel frame. The rear wheel hubs and drums shall also be mounted on the same frame. The parking brake assembly and cables together with a diagonally split hydraulic circuit, fitted with the master cylinder, fluid reservoir and brake pedal shall also be fitted to the unit. The unit must also include a working brake light system. It shall be designed to allow students to learn the principles of disc and drum braking systems and must enable students to carry out hands-on practical tasks. AAT-01 1 Nos. H 5 86 Drum brake assembly (LJT MAKE) Specification:- Drum Brake Assembly consist of following items for its working model 1. Wheel Drum 2. Brake Shoes 3. Wheel Cylinder 4. Spring 5. Nut.,Bolts 6. Front Axle Assembly 7. Electrical Motor with reduction gearbox (V-Belt with Pulley)Whole Assembly Fitted on proper Stand With proper colour code apply. Disc and Drum Brake Systems: This module shall consist of a hardware trainer based on the real automotive components found in a front / rear disc and drum braking system. This must include a pair of front wheel hubs with disc rotors and calipers AAT-02 1 No. H Page 179 6 78 Disk brake with caliper assembly (LJT MAKE/ Equivalent) Specification:- Disc brake assembly is mounted on sturdy stand. The assembly consists of bellow stated parts to make it working model.The equipment is supplied duly painted with a pre defined colour codes for better understanding.· Tandem master cylinder· Wheel cylinder· Brake drum assembly· Brake light unit in working condition· Disc brake assembly· Brake pad· Brake pipe line· Suitable Electrical motor with Reduction Gear box assembly.(With V belt pulley drive)· Brake caliperRequired parts provided to make it complete working model.With suitable stand.- Santro/Maruti make or equivalent. Disc and Drum Brake Systems : This module shall consist of a hardware trainer based on the real automotive components found in a front / rear disc and drum braking system. This must include a pair of front wheel hubs with disc rotors and calipers mounted on a rigid steel frame. The rear wheel hubs and drums shall also be mounted on the same frame. The parking brake assembly and cables together with a diagonally split hydraulic circuit, fitted with the master cylinder, fluid reservoir and brake pedal shall also be fitted to the unit. The unit must also include a working brake light system. AAT-02 1 No. H 7 84 Drum brake assembly (LJT MAKE / Equivalent) Specification: Drum Brake Assembly consist of following items for its working model1. Wheel Drum2. Brake Shoes3. Wheel Cylinder4. Spring5. Nut.,Bolts6. Front Axle Assembly7. Electrical Motor with reduction gearbox (V-Belt with Pulley)Whole Assembly Fitted on proper Stand With proper colour code apply.-TVS/Leyland make Disc and Drum Brake Systems : This module shall consist of a hardware trainer based on the real automotive components found in a front / rear disc and drum braking system. This must include a pair of front wheel hubs with disc rotors and calipers mounted on a rigid steel frame. The rear wheel hubs and drums shall also be mounted on the same frame. The parking brake assembly and cables together with a diagonally split hydraulic circuit, fitted with the master cylinder, fluid reservoir and brake pedal shall also be fitted to the unit. The unit must also include a working brake light system. It shall be designed to allow students to learn the principles of disc and AAT-01 4 Nos. 898560 Page 180 8 99 Cut model of 4 stroke diesel engine on stand Specification:- Motorised actual working cut sectioned of four stroke four cylinder diesel engine mounted on sturdy stand. The cutting should enable the working parts visible i.e. connecting rod. Piston, Valve spring, fuel filter pump, cooling system, lubrication system etc.Suitable Electric motor drive with reduction gear to be provided to understand working of engine.The equipments shall be supplied duly painted with a pre-defined colour codes for better understanding. The engine should be cut in such a way to demonstrate bellow stated parts movable & stationary parts.(1) Cylinder head (2) Engine block (3) Piston, Piston rings & Connecting rod (4) Rocker shaft assembly (5) Crank shaft (6) Timing gear / Chain (7) Fly Wheel (8) Valves ( Operation & Timing ) (9) Oil filter & pump (10) Water pump (11) Air Cleaner (12) F. I . pump. (13) Fuel Feed pump. (14) Injector (15) Intake & Exhaust manifold (16) Starter motor (17) Fuel Filter (18) Alternator (19) Silencer (20) RadiatorTo understand working of Diesel engine the required parts be provided..With suitable stand. 4 Stroke 6 chlinder Diesel Engine TATA or Equivalent. AAT-02 1 No. H 9 81 Synchromesh gear box of LCV Specification:- Synchromesh gear box should be visualized the gears and synchronized unit, main shaft, Lay Shaft, Reverse gear, sleeter mechanism. The motor should be provide power to driving shaft & working of gear box can be shown for power transmission. ‘V’ belt and pulleys may be used to avoid slip. The whole assembly should be properly mounted on AAT-01 2 Nos. 227520 H Page 181 10 83 Synchromesh gear box of LCV Specification:- Synchromesh gear box should be visualized the gears and synchronized unit, main shaft, Lay Shaft, Reverse gear, sleeter mechanism. The motor should be provide power to driving shaft & working of gear box can be shown for power transmission. ‘V’ belt and pulleys may be used to avoid slip. The whole assembly should be properly mounted on suitable stand. Required parts should be provided If needed working condition of synchromesh gear box .- Mahendra/Maruti make or equivalent AAT-02 2 Nos. 227520 H 11 84 Gear box with differential (Transaxle) Specification:- Gear box With Differential assembly properly mounted on strudy stand with proper colourized .Following parts required 1. Gearbox Assembly2. Differential Assembly3. Propeller Shaft4. Rear Axle Assembly 5. Brake Drum Assembly 6. Brake pipe 7. Tandem master cylinder 8. Oil tank 9. Brake PedalElectrical Motor With Reduction Gearbox With V belt pulley--Mahendra/Maruti make or equivalent AAT-02 1 No. 172000 H Page 182 12 95 Cut model of 4 stroke Petrol engine on stand Specification:- Motorised actual working cut sectioned of four stroke four cylinder petrol engine mounted on sturdy stand. The cutting should enable the working part visible i.e. connecting rod. Piston, Valve, Valve springs, fuel filter, pump, cooling system and lubrication system. Suitable Electric Motor drive with gear reduction be provided to understand working of engine. System should be designed for easy visibility & understanding of inner parts & should be provided with needed parts. The equipment shall be supplied duly painted with a pre-defined colour codes for better understanding. The engine should be cut in such a way to demonstrate bellow stated parts movable & stationary parts.(1) Cylinder head.(2) Engine block.(3) Piston, Piston rings & Connecting rod.(4) Rocker shaft assembly.(5) Crank Shaft(6) Timing gear / chain.(7) Fly wheel(8) Valves (Operation & Timing )(9) Compression chamber(10) Oil filter & pump.(11) Water pump & Radiator (12) Air Cleaner.(13) Intake & Exhaust manifold (14) Starter Motor(15) Alternator(16) Silencer(17) Carburettor(18) Distributor(19) RadiatorRequired parts be provided for working of Four stroke Petrol Engine.With suitable stand. Toyota or Equivalent Model. AAT-01 1 No. H Page 183 13 77 Distributor (LJT MAKE) Specification:- 4 Cylinder /6 Cylinder 12 volt Suitable for LMV type-Delco make or equivalent This module shall include a hardware trainer that is based on the real automotive components found in a distributorless ignition system. The unit shall be powered by a 12V DC motor and must be supplied with an appropriate power supply. The unit must be fully guarded and be intrinsically safe for student usage. It must feature an inductive pickup system, four spark plugs, HT ignition coil, and DIS module. A series of high resistance and open circuit faults shall be inserted using a bank of switches. This module must enable students to learn the principles of distributorless ignition systems and shall allow students to carry out the following hands-on tasks: · Investigate the fundamentals of ignition systems. · Inspect and test ignition primary circuit wiring and components. · Inspect and test ignition system secondary circuit wiring & components. Inspect and test ignition coils. · Inspect and test distributor. · Inspect & test ignition system pick-up sensor or triggering chitradurgaices. · AAT-01 1 Nos. 14 21 Rear axle assembly complete with drive shaft and abrake drums (full floating, semi floatingtype,and 1/4 floating) (Model) - Mahindra / Hindustan make or Equivalent ISO approved. ABT-06 01 no 180000 180000 Honnavara 15 84 Gear box with differential (Trans axle) AAT-03 1 No 162000 162000 Draft approved by the Commissioner) Joint Director(Trg) Thirty three lakhs fifty thousand nine hundred and forty six only for Commissioner Dept Of Employment & Training Page 184 NS-PKG-21 SL. No. DGET SL. No. DESCRIPTION OF THE ITEMS Module Code QTY REQD AS PER DGET Estimate d Cost Per Unit Total Estimated Cost 1 64 AC Alternator slip ring press AAT-03 1 Nos 12600 12600 Honnavara 2 72 AG 7 Grinder FAT-01 1No. 28000 28000 chitradurga 3 70,71,68,9 7,97 AG 7 Grinder & AG4 FAT-03,04,04,FBT- 04,02,02 8 Nos 35000 280000 nanjangud- 07,kookanuranur-01 NO. 4 86 Alternator and in built regulator AAT-03 2 Nos 22770 45540 Honnavara 5 91,62 Battery Charger 6-24 V with 10 A rate AAT-02,03 2 Nos 18100 36200 Honnavara 6 105,106,98 , 79,82 Spot welding machine-3KVA 3 phase water cooled arm & electrode. ABT-02,PMBT-02, FBT-02,03,04 17 Nos 79800 1356600 chitradurga- 08,kookanuranur-08, HONNAVARA -01 7 66 Electrical test bench-Standard make. AAT-03 1 No. 163000 163000 Honnavara 8 84 Starter test bench . AAT-03 1 Nos 163000 163000 Honnavara 9 6,8,6,6 Solenaid with core: a) coil voltage of 12 volts DC at 6mm strokes of 035kg forces of maximum stroke 18, having coil power 10 watts b) coil voltage of 240 volts AC of having 04kg forces at 6mm stroke maximum strock 24coil power 15VA EBT-02,02,EBT- 02,02,02 36 NOS 3200 115200 chitradurga- 8,Tiputtur- 8,nalatwad-8,puttur- 8,bagalkote-4 10 103 Smoke Testing Machine.AAI approved. AC Power Supply : 100-300V AC, 1 Phase, 48 - 63 Hz DC Power Supply : 11V – 14V DC, Automated sensor with printer LG or Equivalent make. AAT-01 2 No. H 11 9 Wheel balancing machine with accessory- computerised type- standard make. AAT-02 1 set 312000 312000 Honnavara 12 96 Engine Cranker with 12V & 24V , AC to DC power supply system having Battery Charger , 12V , 21 plates-2batteries connected in series, and cable for 3 mtr each, monted on a movable trolley. ABT-05 1 No. 163000 163000 Honnavara 3003440 Draft approved by the Commissioner) Dept Of Employment & Training Rupees Thirty Lakhs three thousand four hundred and fourty only LIST OF TOOLS & EQUIPMENTS TO BE PROCURED UNDER SHOPPING FOR PROJECT I.T.I's Consignee Govt I.T.I for Commissioner Joint Director(Trg) Page 185 NS-PKG-22 Sl No DGET SL NO. DESCRIPTION OF THE ITEMS Module Code TotalQTY Estimate d Cost Total Estimated Cost Consignee Govt I.T.I 1 1,1,1,1,11, 2,99,67,67, 73,84,1, 10,75,3,3,7 5. Bench Vices 100 mm width of jaw for work benches Smith or Equivalent Make EBT-1, PMBT-3, EBT-5,6, EAT-1, ECBT-1, EAT-1,3,5, EBT-1,ECBT-1, ECBT-5,4, EAT-1 204 Nos 3500 714000 bagalkotealkote-8, KGF-16, Haliyal-16, Huvinahadagali-8, Malavalli-52, Gurumitkal-56, Gowribidanur-8. 2 1,1,1,4,1,1, 1,1,2,2,2,2, 1, Bench Vices 125 mm width of jaw for work benches Smith or Equivalent Make PMAT-1,2,3, FBT & FAT, PMBT-2,4,5,6, PMAT-1to3, RACAT- 3, AAT-3, FBT & FAT, FBT- 1,2,3,4,5,6 & FAT- 2,4&5, ECBT-1, ECBT-5,4,3, EBT-1, PMBT-2,5,5, PMAT- 1. 276 Nos 5600 1545600 Belgaum-24, kookanuranur-40, KGF-44, karwar-8, Honnavara-8, nanjangud-44, chitradurgaarayasam udra-44, Malavalli-4, Gurumitkal-12, Madikere-12, Kanakpura-16. 3 91,35,29 Bench vice 120mm, 150mm PMBT-02, FBT- 05,05 10 sets 17800 178000 nanjangud-02 Sets 4 21,21,21 Bench vice 200mm EAT-02,02,02 18Nos 11800 212400 bagalkote-6,Tiputtur- 6,puttur-6 2650000 Draft approved by the Commissioner) Rupees Twenty six Lakhs sixty five thousand only for Commissioner Joint Director(Trg) LIST OF TOOLS & EQUIPMENTS TO BE PROCURED UNDER SHOPPING FOR PROJECT I.T.I's Dept Of Employment & Training Page 186 NS-PKG-23 SL. NO. DGET SL. NO. DESCRIPTION OF THE ITEMS Module Code QTY REQD AS PER DGET Estimated Cost Per Unit TOTAL Estimated Cost Consignee Govt I.T.I 1 10,11 8085 kit :- 8085 C,P,U, at 4k powerfull firm ware, including all standard comands, lodes function and utility subroding besides assembles and disammbles 8k user RAM 6264. memory expention provision UP to 56k versatile keyboard/display controler using 8279 46 parallel 7/0 lines serial I/O through auto adjusting type RS-232 channel programable lines. 2*40 LED display 104 key standard PC comfertable all addrass,data and control & hardware intrrapt lines are brough at a 50 pin FRC connecter RAM sockets are provided with battery bark up.supplied in attractive enclosure. with built in PS and interfacing modules such as DAC,ADC, Traffic lights, stepper motors,elevators,LED display and keyboard. the above system should be remotely controlled EAT-03, 32 Nos. 21400 684800 Tiptur-04, Chitradurga-04, Gowribidnur-04, Puttur-04, Nalathwad-04, Bagalkot- 04, Mandya-04, Hoovinahadagali-04 2 20 IC based power supply :- I/P voltage-230v-50h z ±12v 2a, ± 5v 2a. Line regulation=0.05%, ± 3mv for line voltage variation of ± 10%. Load regulation:- ± 0.05%, ± 3mv from no load to full load. Metering:- microcontroller based Plasma.Ripple:- 2mv Rms. Protection:- short circute & over load protected o/p with remote controlled system EAT-03 28 Nos. 8150 228200 Tiptur-04, Chitradurga-04, Gowribidnur-04, Puttur-04, Nalathwad-04, Bagalkot- 04, Mandya-04, 3 24,24 Microprocessor based recorder: Should accept voltage, current, RTD input, Thermocouple, techo generator inputs, should have data logging fecilities and four pens recorder and it should be industrial type. EAT- 03,03 8 Nos 165000 1320000 Hoovin hadagali-1 LIST OF TOOLS & EQUIPMENTS TO BE PROCURED UNDER SHOPPING FOR PROJECT I.T.I's Page 187 4 22,N,22,N, 22,22,22,2 3 Color pattern generator : Operating Vg : A/C 230V 50Hz, standard access ories, user manual, RS-232 communication port & cable, VGA connectors, HD-15 pin, signals RGB, H sink & V sink, source impedence 75 ohms, o/p level 0.714V, Auto caliberation, output prootection, diode buffer should have standard test patterns and controls programmable pattern with interfacing facility to pc. EAT- 03,03,03,0 3,03,03,03 ,03 15nos 55800 837000 HDL-1,mandya-8,MDK- 1,DHURGA-1,TIP-1,PTR- 1,BAG-1,NLT-1. 5 59 CRO Digital , Dual Trace 60 MHz, X-Y mode, Storage upto 10 waveforms, Max. i / p voltage 400 V (DC + Peak AC), On screen readout display with remotly power controlled- ECAT-05 3 Nos. 98000 294000 Malavalli-1, Shimoga-1, Gurmitkal 6 4,N,4,4,7 SMPS trainer (IC & Transistorized based) with various test points for check the voltage and wave form having 4 O/P 110V, 24V,12V,5V The above system should be mounted on a rugged suitcase type cabinet, and strongly supported by instructional manual, havi EBT- 03,03,03,0 3,03 25 Nos 16400.00 410000.00 Puttur-5,chitradurgs-5,Tiptur- 5,Bagalkote-5,Nalatwad-5 3774000 Draft approved by the Commissioner) Rupees Thirty seven lakhs seventy four thousands only Joint Director(Trg) for Commissioner Dept Of Employment & Training Page 188 NS-PKG-24 SL. NO. DGET SL. NO. DESCRIPTION OF THE ITEMS Module Code QTY REQD AS PER DGET Estimated Cost Per Unit TOTAL Estimated Cost Consignee Govt I.T.I 1 16 Function generators with different O/P:- "Function generator:- 0- 2MHZ micro controller based, with Microcontroller based alpha numeric read out, Functions- Sine, Square, Triangular ramp & Pulse (TTL).with microcontroller based touch sensitive system with remotely controlled. EAT-03 56 Nos. 41400 2318400 Tiptur-08, Chitradurga-08, Gowribidnur-08, Puttur-08, Nalathwad-08, Bagalkot-08, Mandya-08, 2 15,332,10, 9,15 Function generator:- s 0.1 Hz to 3MHz, sine,square,pulse, Sine Square, TraingFunction generator:-s 0.1 Hz to 3MHz ,sine,square,pulse, Sine Square, Traingular,ramp DC-off set,NUMERIC DISPLAY&ADJUSTEMENT FOR DC OffSET,OUTPUT AMPLITUDE, Frequency sweep etc. Should have AM/FM,PWM,PAM 40MHZ AUTOranging frequency counter, PC interface for remote control and programming." EAT- 02,02,EBT- 03,04,EAT- 02 15 Nos 15000 225000 Tiptur-2,Gowribidnur-2,Puttur- 5,4,2 3 36 TRAINERS OF VARIOUS SENSORS:- HALL SENSORS, MAGNETIC SENSORS, TACHO GENERATORS, OPTO CUPLERS WITH COMPLETE SETUP. (EACH SENSORS SHOULD HAVE SEPARATE TRAINER SETUP CONSISTING OF DC SUPPLY SENSING ELEMENT, AMPLIFIER AND DISPLAY OF SENSED PARAMETER.) EACH systems should be Microcontroller based touch sensitive system and controlled remotely EAT-02 7No. 36500 255500 Tiptur-01, Chitradurga-01, Gowribidnur-01, Puttur-01, Nalathwad-01, Bagalkot-01, Mandya-01, LIST OF TOOLS & EQUIPMENTS TO BE PROCURED UNDER SHOPPING FOR PROJECT I.T.I's Page 189 4 4,339,22,4 ,22,5,1 Basic electronic trainer :- supply voltage 230 volts AC,out put Dc voltage + 5 volts, 1 amp +12 volts, 0-15 volts 500 mili amps microcontrolled based Touch sensistive system for increment and Decrement for Voltage, AC voltages 3-6-9-12,( transformer secondary, tappings )500 mili amps . E-12 series ½ watt resistar (ohms , kilo ohms , mega ohms values). capasiters electrolitic & non electrolitic capasiters standerd values. Bread board :- having high quality tie points. terminals 2mm(BS- 2).Meter:- alpha numerical digital meter for V&I mesuarments. Function genarater:- 20 hz to 20 kilo hz (sine,square,trangle waves.) Active components:- diotes , transisters ,zener diode of varieas values FET,LDR. the abow camponent should be mounted an a attractive and ragued cabinate should operate on remote controlled system. EAT- 03,02,02,0 2,03 49Nos 21500 1053500 Gowribidnur-7,4Tiptur- 7,4,Puttur-7,4, Chitrdurga-4, nalatwad-4, bagalkote-4, mandya-4 3852400 Draft approved by the Commissioner) Rupees Thirty eight lakhs fifty two thousand four hundred only Joint Director(Trg) for Commissioner Dept Of Employment & Training Page 190 NS-PKG-25 SL. NO. DGET SL. NO. DESCRIPTION OF THE ITEMS Module Code QTY REQD AS PER DGET Estimated Cost Per Unit TOTAL Estimated Cost Consignee Govt I.T.I 1 9,7,21,9,3,3,9,19,35,9.11 Multimeter: Analog type, High resistent measurement, 0- 200Mohms, accuracy: ± 3% at mid scale. DC voltage: 0 - 1000, DC current: 0 -10 Amps, AC voltage 0 - 1000V , AC current: 0 - 10 Accurecy: ± 1 % of fullscale value. Battery operated andmains operated cutout mechanism for overvoltage and over current protection and should be supplied with standard accessories for high voltage and high current measurement. make Motwane/Philips EBT-03 EBT-05 ECBT- 01,EAT- 02,03,03,0 2,EBT- 02,EAT- 02 191 Nos. 7500 1432500 MDK-4,PTUR-12,TIP-4,NLT-4 2 12 SINE-WAVE GENERATOR:- 0.1 Hz to 3MHz, sine, square, pulse, Sine Square, TraingFunction generator:- s 0.1 Hz to 3MHz, sine,square, pulse, Sine Square, Traingular,ramp DC-off set, NUMERIC DISPLAY& ADJUSTEMENT FOR DC OffSET,OUTPUT AMPLITUDE,Frequency sweep etc. Should have AM/FM,PWM,PAM 40MHZ AUTO ranging frequency counter, PC interface for remote controlling and programming. Scientek / Phillips / HP make or equivalent. EBT-03 35 Nos. 24500 857500 Tiptur-07, Chitradurga-07, Gowribidnur-07, Puttur-07, Nalathwad-07, Bagalkot-07, Mandya-07, 3 34 DC DRIVE/TRAINER:- USING PHASE CONTROL, PWM TECHNOLOGY SUITABLE FOR CONTROL OF THE DC SHUNT AND COMPOUND MOTOR OF 5HP WITH THE OPEN LOOP AND THE CLOSED LOOP FACILITY OPERATED WITH 220V AC SUPPLY. THE TRAINER SHOULD HAVE ALL SECTIONS PRINTED ON THE PANEL WITH TEST POINTS WITH DIGITAL DISPLAY TO READ VOLTAGE AND CURRENT AND SHOULD HAVE TACHO FEED BACK FOR PROTECTION OF DC MOTORS. THE DRIVE SHOULD BE OF INDUSTRIAL GRADE HAVING ALL PROTECTIONS TO THE MOTORS AND DRIVE AND OF LATEST TECHNOLOGY.AND SHOULD BE SUPPLLIED WITH DETAILED INSTRUCTIONAL MANUAL FOR TRAINING PURPOSE. EAT-02 07 each 68175 477225 Tiptur-01, Chitradurga-01, Gowribidnur-01, Puttur-01, Nalathwad-01, Bagalkot-01, Mandya-01, LIST OF TOOLS & EQUIPMENTS TO BE PROCURED UNDER SHOPPING FOR PROJECT I.T.I's Page 191 4 16 Digital Multimeter 0-1000 V DC ,750 V AC 0 to 10 mega ohms, 0 to 10 amps AC DC -Meco or Equivallent ECBT-03 51 Nos. 7500 413100 Malavalli-17, shimoga-17, gurmitkal-17 5 59 CRO Analog , Dual Trace 60 MHz, X-Y mode, Storage upto 10 waveforms, Max. i / p voltage 400 V (DC + Peak AC), On screen readout display with remotly power controlled - ECAT-05 3 Nos. 132500 397500 Malavalli-1, shimoga-1, gurmitkal-1 6 N,8,19 DC Power supply:- 0-30v, 5A, l/P voltage-230v-50hz , Line regulation=005%, ± 3mv for line voltage variation of ± 10% Load regulation: ± 005%, ± 3mv from load to full load microntrolled alha numeric display Ripple: 2mv Rms Protection: short circuit & over load protected o/p with micro controller based touch sensitive device for increment and decrement of voltage and current and remote control facility - reputed company make EAT- 02,02,03 12Nos 19700 236400 DHURGA-2,PTUR-2,8 3814225 Draft approved by the Commissioner) Joint Director(Trg) for Commissioner Dept Of Employment & Training Rupees thirty eight lakhs fourteen thousand two hundred and twenty five only Page 192 NS-PKG-26 SL. NO. DGET SL. NO. DESCRIPTION OF THE ITEMS Module Code QTY REQD AS PER DGET Estimated Cost Per Unit TOTAL Estimated Cost Consignee Govt I.T.I 1 73,28,N,2 8 Motor AC phase wound Slip ring type 5 HP 400 volts, 3 phase 50 cycles with Microcontroller based starter with alpha numerical LCD display MPB controller with VU 400Volts Mechanical loading arrangement ECBT- 04,EAT- 02,02,02 9 Nos. 188190 1693710 Tip[tur-1,Chitrdurga-1, Puttur- 1, malavalli-2, Shimoga-2, gurmitkal-2 2 26,27,27, N DC SHUNT MOTOR DC 220 volt, 2HP YLM with SB finishing with TVC drive with digital display with Mechanical loading arrangement with test reports EAT- 02,FBT- 06,PMBT- 03,03 13nos 58670 762710 KOK-2,HNP-2,KNP-2 3 N,27,73,29 Motor of AC squirrel cage 3 phase 440 volt,50Hz,3HP with Microcontroller based starter alpha numerical LCD display MPB controlled with VU and Mechanical loading arrangement EAT- 02,02,EC BT- 04,FBT-06 9 Nos. 97920 881280 DHURGA-1,PTUR-1,KOK-1 4 29 4 POINT STARTER SUITABLE FOR CONTROL OF 5 HP DC MOTOR WITH REQUIRED METERING AND CONTROL SYSTEM EAT-02 02Nos. 20000.00 40000.00 Puttur 5 Motor AC single phase 230 volts 50 Hz capacitor type with Micro controller based starter with alpha numeric LCD display MPB controller with VU and Mechanical load ECBT-04 6 Nos. 54766 328596 malavalli-2, Shimoga-2, gurmitkal-2 3706296 Draft approved by the Commissioner) LIST OF TOOLS & EQUIPMENTS TO BE PROCURED UNDER SHOPPING FOR PROJECT I.T.I's Rupees thirty seven lakhs six thousand two hundred and ninety six only Joint Director(Trg) for Commissioner Dept Of Employment & Training Page 193 NS-PKG-27 SL. NO. DGET SL. NO. DESCRIPTION OF THE ITEMS Module Code QTY REQD AS PER DGET Estimated Cost Per Unit TOTAL Estimated Cost Consignee Govt I.T.I 1 73,27 DC compound motor- DC 220 volt, 3HP YLM with SB finishing with TVC drive with digital display with Mechanical loading arrangement with test reports ECBT- 04,EAT- 02 12 NOS 58670 704040 malavalli-3, Shimoga-3, gurmitkal-3 2 89 Transformer single phase 1KVA 230/115V 50Hz core type, air cooled-AE or equivalent ECBT-02 12 Nos. 16600 199200 malavalli-4, Shimoga-4, gurmitkal-4 3 63 Oil testing kit, digital display, voltage range upto 36KV- Megar 11101 model or equivalent ECAT-03 3 No. 53200 159600 malavalli-1, Shimoga-1, gurmitkal-1 4 67, 66 Transformer 10 KVA, 415/230V, 3 Ph,(Delta/Star), oil cooled, fitted with safety/protection devices with tank and Castor wheels - Instrans/AE or Equivalent make ECAT-03 ECBT-05 6 No. 84600 507600 malavalli-2, Shimoga-2, gurmitkal-2 5 88 Auto Transformer, continuous variation single phase, enclosed type 0-270V, 6A -AE or equivalent ECBT-02 18Nos. 10025 180450 malavalli-6, Shimoga-6, gurmitkal-6 6 65 & 66, 65 Transformer 5 KVA, 415/230V, 3 Ph,(Delta/Star), oil cooled, fitted with safety/protection devices with tank and Castor wheels - Instrans/AE or Equivalent make ECAT-03 ECBT-05 12 Nos. 56000 672000 malavalli-4, Shimoga-4, gurmitkal-4 7 90 Transformer three phase 2.5KVA 400/230V 50 Hz delta and star oil cooled-AE or equivalent ECBT-02 6 Nos. 42200 253200 malavalli-2, Shimoga-2, gurmitkal-2 8 62,13,20,1 3,28,62,30 Auto Transformer, continuous variation, single phase, flush mounting type, 0-270V, 5A - AE make or equivalent ECAT- 01,EBT- 04,03,04,, 05,05 32 Nos. 11700 374400 Tiptur-03,Mandya-5 malavalli- 8, Shimoga-8, gurmitkal-8 9 50,27 AC single phase induction motor with microcontrolled starter with alpha numeric display with machanical loading arrengement EAT- 02,02 02 Nos. 40000 80000.00 nalatwad-1, tiptur-1 10 8,8,8 Battery Storage : a) Lead Acid tubular type 12 V 120 AH, b) Sealed Maintenance free Battery 12V 120AH - reputed co Make EBT-02 04 Nos. 30000 120000.00 MADIKERI 11 69 Auto Transoformer 3 phase input 400V, Output 0-440V- 32 Amps, Enclosed type AE or equivalent ECAT-05 6 Nos. 87500 525000 malavalli-2, Shimoga-2, gurmitkal-2 3775490 Draft approved by the Commissioner) LIST OF TOOLS & EQUIPMENTS TO BE PROCURED UNDER SHOPPING FOR PROJECT I.T.I's Rs. Thirty seven lakhs seventy five thousnd four hundred and ninety only Joint Director(Trg) Page 194 for Commissioner Dept Of Employment & Training Page 195 NS-PKG-28 SL. NO. DGET SL. NO. DESCRIPTION OF THE ITEMS Module Code QTY REQD AS PER DGET Estimated Cost Per Unit TOTAL Estimated Cost Consignee Govt I.T.I 1 5,6,7 Oscilloscope: 100MHz. Dual trace with LCD Display:- Band width VD- DC-100 MHz. HD-DC-50 MHz.RISE TIME-5.8 ns accuracy VD&HD±3%. Difflection factor HD&VD - 2mv/ div-5v/div input Z. VD&HD-1M ohm/30 Pf ± 10% sensitivity. V&H 2mv/div. I/P voltage 2500V TIME BASE FREQUENCY-20ns/div-.5 sec/div. Display-LCD display. with standard accessories - Scientek / Phillips make or equivalent. the system should be remotely controlled. EBT-05 EBT-05 EBT-04 28 Nos. 140500 3934000 Tiptur-04, Chitradurga-04, Gowribidnur-04, Puttur-04, Nalathwad-04, Bagalkot-04, Mandya-04, 3934000 Draft approved by the Commissioner) LIST OF TOOLS & EQUIPMENTS TO BE PROCURED UNDER SHOPPING FOR PROJECT I.T.I's Rupees Thirty Nine lakhs Thirty Four Thousand only Joint Director(Trg) for Commissioner Dept Of Employment & Training Page 196 NS-PKG-29 SL. NO. DGET SL. NO. DESCRIPTION OF THE ITEMS Module Code QTY REQD AS PER DGET Estimated Cost Per Unit TOTAL Estimated Cost Consignee Govt I.T.I 1 37 PLC SYSTEM WITH 20 DI, 20 RO, 4 AI AND 2 AO FOR CONTROL OF THE DRIVE SYSTEM. THE PLC SHOULD HAVE BUILT IN HIGH SPEED COUNTING UPTO 60 KHz AND SHOULD HAVE THE FEATURES OF PWM AND PULSE TRAIN OUTPUT AND ALL WILL BE OPERATED WITH THE 24 V DC SYSTEM WITH ENCODERS OF 1000 PPR, THE PLC SYSTEM SHOULD BE OF INDUSTRIAL GRADE, AND OF LATEST TECHNOLOGY.AND SHOULD BE SUPPLLIED WITH DETAILED INSTRUCTIONAL MANUAL FOR TRAINING PURPOSE. REPUTED COMPANY MAKE. THE ABOVE UNIT SHOULD BE REMOTELY CONTROLLED. EAT-02 7No. 267650 1873550 Tiptur-01, Chitradurga-01, Gowribidnur-01, Puttur-01, Nalathwad-01, Bagalkot-01, Mandya-01, 2 80 Universal IC tester-Suitable for testing digital IC's and linear IC's with digital display readout.- HAMEG/Siemens/LG or equivalent. ECBT-03 6 Nos. 81090 486540 malavalli-2, Shimoga-2, gurmitkal-2 3 13 Universalr/PAL Progamme:- To programme all type of EPROMS,FLASH MEMORY,PROM NOVRAM, MICROCONTROLLER, PLD, PAL, AND OTHER STANDARSLOGICS. .ighspeed progamming,chip identification, SECURITY FETURES:- multivoltage verification, multiple intefacing facility. Socket-48pin high qulity pin driver universal type. EAT-03 14 Nos. 21400 299600 Tiptur-02, Chitradurga-02, Gowribidnur-02, Puttur-02, Nalathwad-02, Bagalkot-02, Mandya-02, 4 21,22,2,7 digital Multimeter 3 1/2 display 0-750 volt AC 0-1000 v DC 200 m.ohm -2 M ohm with testing of capitor and diode with beefer- Meco/AE make or equivalent. ECBT-05 ECBT- 04,EBT03 ,06 136 NOS 8000 1088000 NLT-17, PTUR-17 malavalli- 34, Shimoga-34, gurmitkal-34 3747690 Draft approved by the Commissioner) Rupees thirty seven lakhs forty seven thousand six hundred and ninety only Joint Director(Trg) for Commissioner Dept Of Employment & Training LIST OF TOOLS & EQUIPMENTS TO BE PROCURED UNDER SHOPPING FOR PROJECT I.T.I's Page 197 NS-PKG-30 SL. NO. DGET SL. NO. DESCRIPTION OF THE ITEMS Module Code QTY REQD AS PER DGET Estimated Cost Per Unit TOTAL Estimated Cost Consignee Govt I.T.I 1 18,18,18 Dry film laminator EBT- 04,04,04 16 Nos. 138000 2208000 Haliyala-2,Hadagali-2,Tiptur- 02, Chitradurga-02, Gowribidnur-02, Puttur-02, Nalathwad-02, Bagalkot-02, Mandya-02, 2 11,25 Microcontroller kit along with addon card DAC, ADC, Stepper Motor. CPU: 8031 Microcontroller working with 3.57 MHz crystal MEMORY:32K RAM Expandable to 64K, 32KEPROM(27256) Expandable to 64K, DISPLAY: 8 Digit 7 Segment LED Displays, KEYBOARD: 33 keys keyboard including RESET, PARALLEL PORT: 2 Nos 8255(Programmable Peripheral Interface), SERIAL PORT: 8251A (Programmable Communication Interface) , TIMER: 3 Nos, 16 Bit Programmable Timers using 8253 , TERMINATIONS: 12 Port lines of 8051 are terminated in the CPU Module in a single row, SOFTWARE FACILITIES: Break, Single Step, Execute, Register, Move, Fill, Download, Insert, Delete etc. the above system shoudl be remotely controlled EAT-03 EAT-02 56Nos. 28750 1610000 Tiptur-08, Chitradurga-08, Gowribidnur-08, Puttur-08, Nalathwad-08, Bagalkot-08, Mandya-08, Total 3818000 Draft approved by the Commissioner) Joint Director(Trg) LIST OF TOOLS & EQUIPMENTS TO BE PROCURED UNDER SHOPPING FOR PROJECT I.T.I's Rs. Thirty eight lakhs eighteen thousand only for Commissioner Dept Of Employment & Training Page 198 NS-PKG-31 SL. NO. DGET SL. NO. DESCRIPTION OF THE ITEMS Module Code QTY REQD AS PER DGET Estimated Cost Per Unit TOTAL Estimated Cost Consignee Govt I.T.I 1 13,7,19,2,12,7 Digital Multimeter: 4% digit display .VOLTAGE RANGE:- 200 mv - 1000 v (AC/DC)having accuracy beter than 0 .8%. CURRENT RANG:-20 Micro Amps - 10 Amps (AC/DC) having accuracy beter than' 3%. REGISTANCE RANGE:-minimum of 200 mege ohms. and should havestanderd features frequency mesurement capacitence mesurment,hfe(Transistor) mesurment' and diode testing. and must have protection against over load. and should auto range & battery operatred.and mains operated. EBT-03 EBT- 06,02,EAT- 03,03,02,0 1,02,01,3, 2,1 322 Nos. 8100 2608200 mandya-4,DHURGA- 56,PTUR-24, Tiptur-34, Chitradurga-34,56, Gowribidnur-34, Puttur-24,34, Nalathwad-34, Bagalkot-34, Mandya-34 2 38 OPEN LOOP AND CLOSED SPEED CONTROL TRAINER FOR AC TRAINER AND TEST SETUP COMPATIBLE WITH PLC SYSTEM:- THE TEST SETUP SHIULD HAVE ALL SENSOR, CONTROL ELEMENT, FOR SIMULATION OF SPEED CONTROLING THE AC MOTORS USING PLC SYSTEM EAT-02 7No. 70235 491645 Tiptur-01, Chitradurga-01, Gowribidnur-01, Puttur-01, Nalathwad-01, Bagalkot-01, Mandya-01 3 61 Regulated Power supplies 0-15 volts/1A with microcontroller based alpha numerical LCD display,shortcircuit protection and over load protection and microcontrolled touch sensitive switch system,with remote controlled operation reputed co.make.with- Standard Make ECBT-03 24 Nos. 6800 163200 malavalli-8, Shimoga-8, gurmitkal-8 LIST OF TOOLS & EQUIPMENTS TO BE PROCURED UNDER SHOPPING FOR PROJECT I.T.I's Page 199 4 6,6,6,N Digital IC trainer for Suitable for studying logic gates flipflops,counters,countership registers,multiflexcures,dimultifluxuresfor bit logic comperator,decodor and encoder,Half adder,full adder,programmer counters,memory elements RAM,ROM EPROM etc ALU,DAC and ADC with 8 microntroller touch sensitive device logic input keys mono pulse clock generator 5V analogue input 8421 binary word generator,12 LEDS for output status indication,2 digit seven segment LCD display for 8421 inputs. the system should be remotely controlled.should have provision to interface the computer EAT- 03,03,03,0 3 16Nos 21450 343200 Puttur-04,Bagalkote-4,Tiptur- 4,Mandya-4. Rupees Thrity six lakhs six thousand two hundred and forty five only 3606245 Draft approved by the Commissioner) Dept Of Employment & Training Joint Director(Trg) for Commissioner Page 200 NS-PKG-32 SL. NO. DGET SL. NO. DESCRIPTION OF THE ITEMS Module Code QTY REQD AS PER DGET Estimated Cost Per Unit TOTAL Estimated Cost Consignee Govt I.T.I 1 17 Through hole plating system: the machine should be useful for plating the holes of a PCB. Should operate on 230V ac mains, should have a container and a stirrer mechanism for chemical reaction. The system should be provided with 10 containers. EBT-04 14 Nos. 182000 2548000 Tiptur-02, Chitradurga-02, Gowribidnur-02, Puttur-02, Nalathwad-02, Bagalkot-02, Mandya-02, 2 20 Roller Tinning machine: the system should be provided with 2 rollers with provision to adjust the gap between them for easy flow of PCB. The system should be provided with speed controller and temperature temperature controller units EBT-04 14 Nos. 88000 1232000 Tiptur-02, Chitradurga-02, Gowribidnur-02, Puttur-02, Nalathwad-02, Bagalkot-02, Mandya-02, Total 3780000 Draft approved by the Commissioner) Joint Director(Trg) for Commissioner Dept Of Employment & Training LIST OF TOOLS & EQUIPMENTS TO BE PROCURED UNDER SHOPPING FOR PROJECT I.T.I's Rupees thirty seven lakhs eighty thousands only Page 201 NS-PKG-33 SL. NO. DGET SL. NO. DESCRIPTION OF THE ITEMS Module Code QTY REQD AS PER DGET Estimated Cost Per Unit TOTAL Estimated Cost Consignee Govt I.T.I 1 26 PCB Drilling machine the unit should be of high speed of 6000rpm for PCB drilling. The system should be of table top type operated on 230V /50Hz mains. EBT-04 14 Nos. 42500 595000 Tiptur-02, Chitradurga-02, Gowribidnur-02, Puttur-02, Nalathwad-02, Bagalkot-02, Mandya-02, 2 24,24,24 Double sided U-V exposure unit: the system should be provided with UV lights with timer for exposure setting. The system should be provided with suction pressure to hold the PCB with the film intact during exposure. The system should operate on 230V AC mains. EBT- 04,04,04 16 Nos. 148000 2368000 Haliyala-2,Hadagali-2,Tiptur- 02, Chitradurga-02, Gowribidnur-02, Puttur-02, Nalathwad-02, Bagalkot-02, Mandya-02 3 23 PCB curing Machine: the system should have a inner size of 14' X 14' X 14' with blower type and the heating elements should be embedded type. The system should be provided with temperature controller unit. EBT-04 14 Nos. 45000 630000 Tiptur-02, Chitradurga-02, Gowribidnur-02, Puttur-02, Nalathwad-02, Bagalkot-02, Mandya-02, 4 73 RF Oscillators-0.1 Hz to 3MHz, sine, square, pulse, Sine Square, TraingFunction generator:- s 0.1 Hz to 3MHz, sine,square, pulse, Sine Square, Traingular,ramp DC-off set, NUMERIC DISPLAY& ADJUSTEMENT FOR DC OffSET,OUTPUT AMPLITUDE,Frequency sweep etc. Should have AM/FM,PWM,PAM 40MHZ AUTO ranging frequency counter, PC interface for remote controlling and programming. ECBT-03 12 Nos. 24500 294000 malavalli-4, Shimoga-4, gurmitkal-4 3292000 Draft approved by the Commissioner) Joint Director(Trg) for Commissioner Dept Of Employment & Training LIST OF TOOLS & EQUIPMENTS TO BE PROCURED UNDER SHOPPING FOR PROJECT I.T.I's Rupees thirty two lakhs ninety two thousand only Page 202 NS-PKG-34 SL. NO. DGET SL. NO. DESCRIPTION OF THE ITEMS Module Code QTY REQD AS PER DGET Estimated Cost Per Unit TOTAL Estimated Cost Consignee Govt I.T.I 1 22 Etcheing Machine hand operated type: should be for PCB etching spray type enclosed type. The system should have chemical resistant body EBT-04 14 Nos. 145000 2030000 Tiptur-02, Chitradurga-02, Gowribidnur-02, Puttur-02, Nalathwad-02, Bagalkot-02, Mandya-02, 2 25,25 PCB shearing Machine EBT- 04,04 14 Nos. 29700 415800 Tiptur-02, Chitradurga-02, Gowribidnur-02, Puttur-02, Nalathwad-02, Bagalkot-02, Mandya-02, 3 21 Photo resistive machine dip coating: should have vertical dip automatically. The system should have stainless steel tank for chemical bath. The PCB holder should be driven by a chain and pully mechanism. The system should operate on 230V AC mains. EBT-04 16Nos. 86000 1376000 Hadagali-2,Tiptur-02, Chitradurga-02, Gowribidnur- 02, Puttur-02, Nalathwad-02, Bagalkot-02, Mandya-02, 3821800 Draft approved by the Commissioner) LIST OF TOOLS & EQUIPMENTS TO BE PROCURED UNDER SHOPPING FOR PROJECT I.T.I's Rupees Thirty eight lakhs twenty one thousand eight hundred only Joint Director(Trg) for Commissioner Dept Of Employment & Training Page 203 NS-PKG-35 SL. NO. DGET SL. NO. DESCRIPTION OF THE ITEMS Module Code QTY REQD AS PER DGET Estimated Cost Per Unit TOTAL Estimated Cost Consignee Govt I.T.I 1 35 VARIABLE FREEQUENCY DRIVE/TRAINER:- AC INVERTER DRIVE 5 HP WITH 150% OVERLOAD AND CONSTANT TORQUE. THE DRIVE SHOULD HAVE ANALOG AND DIGITAL FUNCTIONS SUITABLE FOR THE PLC CONTROLS. THE DRIVE SHOULD BE OF INDUSTRIAL GRADE HAVING ALL PROTECTIONS TO THE MOTORS AND DRIVE AND OF LATEST TECHNOLOGY.AND SHOULD BE OF MICROCONTROLLER BASED TOUCH SENSITIVE SYSTEM WHICH IS REMOTELY CONTROLLED. EAT-02 07Nos. 89132 623924 Tiptur-01, Chitradurga-01, Gowribidnur-01, Puttur-01, Nalathwad-01, Bagalkot-01, Mandya-01 2 12 EPROM Progammer:- To programme all type of EPR OMS,FLASH MEMORY,PROM NOVRAM, .highspeed progamming,chip identification, SECURITY FEATURES:- multivoltage verification, intefacing facility. Socket-48pin high qulity pin driver universal type. EAT-03 14 Nos. 32000 448000 Tiptur-02, Chitradurga-02, Gowribidnur-0\2, Puttur-02, Nalathwad-02, Bagalkot-02, Mandya-02 3 72 IC Tester - Suitable for testing Digital ICs & Linear Ics with remotly power controlled -Siemens or equivalent ECAT-05 6 Nos. 77200 463200 Malavalli-2,Shimoga-2, gurmitkal-2 4 74 Signal Generator sine and square 1 hz-10 M.hz.with Microcontroller based Plasma device and remoetly controlled-Standard make ECBT-03 12 Nos. 39780 477360 Malavalli-4,Shimoga-4, gurmitkal-4 5 58 Signal generator- Different wave shapes with four digit LED/LCD display ,Frequency range 0.1 Hz to 5 MHz 0.5 %Correction.,Amplitute, 30V( p-p), Upto 1KOhm, With DC offset with remote controlled.- Hameg/APLAB Make or Equivalent ECAT-05 6 Nos. 29200 175200 Malavalli-2,Shimoga-2, gurmitkal-2 LIST OF TOOLS & EQUIPMENTS TO BE PROCURED UNDER SHOPPING FOR PROJECT I.T.I's Page 204 6 Soldering iron: soldring iron station comprising of isolating transformer 200-240 volts, soldering iron & parking stand, the iron is equiped with 3 core connecting lead 50W with all standard accessories industrial type, reputed company make EBT-02,03 21 Nos 15000 315000 Chitradurga-21 7 6,6,N,6 AM/FM signal generator :-10mhz micro controller based modulation function-pulse generator, with internal modulation function:-line,square,traiangular,ramp&pulse modulation:-DSB standared, DSB balance,FM,ASK,FSK,PWM. Make:-THE SYSTEM SHOULD BE CONTROOLED REMOTLY EAT- 01,01,01,0 1 8 Nos 28000 224000 Tiptur-2,Hadagali-2,Mandya- 2,Puttur-2 8 78,2 LCR meter , testing probes with digital display read out.- HAMEG make or equivalent. ECBT-03 ,EBT-05 28 Nos. 11628 325584 Malavalli-8,Shimoga-8, gurmitkal-8, TIP-04 9 179,160 Function generators 0.1 Hz to 100KHz micro controller based with alpha numerical LCD display, sine square,traingle and pulse. The system should be controlled remotely EBT- 04,03 9 NOS 12025 108225.00 GWR-4,5 3160493 Draft approved by the Commissioner) Rupees Thirty one lakhs sixty thousand four hundred and ninety three only Dept Of Employment & Training Joint Director(Trg) for Commissioner Page 205 NS-PKG-36 SL. NO. DGET SL. NO. DESCRIPTION OF THE ITEMS Module Code QTY REQD AS PER DGET Estimated Cost Per Unit TOTAL Estimated Cost Consignee Govt I.T.I 1 7,31,4,3,7 Oscilloscope: 20 MHz with probes dual trace/ dual channel high sencitive oseilloscope.Bandwidth: DC - 20MHz, Rice time: 5.8 nano sec.Deflection coefficient: 12 caliberated steps: 5mv - 20v/div, Accurecy: ± 3%, I/p impedence: 1Mohm, I/P voltage: Max 500V(DC/AC peek), time coefficient: 23 caliberated steps 50 ns/div to 1sec/div, and fecility for component testing,it should have other standard and latest controls, display: CRT display, supply voltage: 220 - 240V with all standard accessories - Scientek / Phillips / HP make or equivalent. the system should be remotely controlled. EBT-03 EBT- II,5,EAT- 1,EBT-5,3 33 NOS 52700 1739100 Honnavara-1, malavalli- 4,shimoga-04, gurmitkal-04, mandya-06,02,04,04,02, Hadagali-04 2 5 Oscilloscope dual trace storage:- Analog/digital 100mh z band width , storage oscilloscope dual channel,DC- 30mh z ,2m volts time base 20n sec to 0.2 secs variable hold off 10:1 * 10 magnification.two-in-one operation normal mode. Should have built-in remotely power operating device Diff mode FIP's 4500v max digital storage max sumplus 20 MS/s should have a wavwform process software. should have component testing facility and should be supply with instruction manual ans attentuation probes operating voltage 220-240v AC/50h z . the above system should be remotely controlled. EAT-01 14 Nos. 95445 1336230 Tiptur-02, Chitradurga-02, Gowribidnur-02, Puttur-02, Nalathwad-02, Bagalkot-02, Mandya-02 3075330 Draft approved by the Commissioner) Rupees Thirty lakhs seventy five thousand three hundred and thirty only Joint Director(Trg) LIST OF TOOLS & EQUIPMENTS TO BE PROCURED UNDER SHOPPING FOR PROJECT I.T.I's for Commissioner Dept Of Employment & Training Page 206 NS-PKG-37 SL. NO. DGET SL. NO. DESCRIPTION OF THE ITEMS Module Code QTY REQD AS PER DGET Estimated Cost Per Unit TOTAL Estimated Cost Consignee Govt I.T.I 1 14 ,8 C.R.O :- 50 MH Z :- dual trace/ dual channel high sencitive oseilloscope.Bandwidth: DC - 50MHz, Rise time: 5.8 nano sec.Deflection coefficient: 12 caliberated steps: 5mv - 20v/div, Accurecy: ± 3%, I/p impedence: 1Mohm, I/P voltage: Max 2500V(DC/AC peek), time coefficient: 23 caliberated steps 50 ns/div to 1sec/div, and fecility for component testing,it should have other standard and latest controls, display: CRT display, supply voltage:220 - 240v with remotely controlled system. EAT-02 EBT-03 28 Nos. 65500 1834000 Tiptur-04, Chitradurga-04, Gowribidnur-04, Puttur-04, Nalathwad-04, Bagalkot-04, Mandya-04, 2 76 CRO dual trace/double beam 25 Mhz, with probes dual trace/ dual channel high sencitive oseilloscope.Bandwidth: DC - 20MHz, Rice time: 5.8 nano sec.Deflection coefficient: 12 caliberated steps: 5mv - 20v/div, Accurecy: ± 3%, I/p impedence: 1Mohm, I/P voltage: Max 500V(DC/AC peek), time coefficient: 23 caliberated steps 50 ns/div to 1sec/div, and fecility for component testing,it should have other standard and latest controls, display: CRT display, supply voltage: 220 - 240V with all standard accessories - Scientek / Phillips / HP make or equivalent. the system should be remotely controlled. ECBT-03 6 Nos. 38250 229500 Malavalli-02, shimoga-02, gurmitkal-02 3 62,N,8,19, 20 Regulated Power supplies 0-30 volts/2A l/P voltage-230v- 50hz , Line regulation=005%, ± 3mv for line voltage variation of ± 10% Load regulation: ± 005%, ± 3mv from load to full load microntrolled alha numeric display Ripple: 2mv Rms Protection: short circuit & over load protected o/p with micro controller based touch sensitive device for increment and decrement of voltage and current and remote control facility - reputed company make-Standard Make ECBT- 03,EAT- 03,02,03,0 3 44 Nos. 8407 369908 Mandya-2, Tiptur-2, Bagalkote- 8, Nalatwad-8, Puttur-4, Malavalli-08, shimoga-08, gurmitkal-08 LIST OF TOOLS & EQUIPMENTS TO BE PROCURED UNDER SHOPPING FOR PROJECT I.T.I's Page 207 4 17 Colour T.V LCD display 26" latest technology reputed company make. EAT-01 14 Nos. 48550 679700 Tiptur-02, Chitradurga-02, Gowribidnur-0\2, Puttur-02, Nalathwad-02, Bagalkot-02, Mandya-02 3113108 Draft approved by the Commissioner) Rupees Thirty one lakhs thirteen thousand one hundred and eight only Joint Director(Trg) for Commissioner Dept Of Employment & Training Page 208 NS-PKG-38 SL. NO. DGET SL. NO. DESCRIPTION OF THE ITEMS Module Code QTY REQD AS PER DGET Estimated Cost Per Unit TOTAL Estimated Cost Consignee Govt I.T.I 1 31,30,30 DC BRUSHLESS MOTOR WITH THE SUITABLE DRIVE AND CONTROLLER OF RATING 1 Nm EAT-02,2 09 Nos. 70000 630000 Haliyala-1,Hadagali-1, Tiptur- 01, Chitradurga-01, Gowribidnur-01, Puttur-01, Nalathwad-01, Bagalkot-01, Mandya-01 2 18 DC & AC Meter 0-1amps, Analog and Digital - reputed company make EBT-02 2 Nos. Each. 8250 16500 Tiptur 3 16 DC & AC Meter 0-1milli amps, Analog and Digital - reputed company make EBT-02 2 Nos. Each. 8250 16500 Tiptur 4 15 DC & AC Meter 0-500micro amps, Analog and Digital - reputed company make EBT-02 2 Nos. Each. 8250 16500 Tiptur 5 17 DC & AC Meter 0-500milli amps, Analog and Digital - reputed company make EBT-02 2 Nos. Each. 8250 16500 Tiptur 6 14 DC & AC Meter 0-50micro amps, Analog and Digital - reputed company make EBT-02 2 Nos. Each. 8250 16500 Tiptur 7 39,18,18,1 8,N,18 Discharge tester:- high rate discharge tests range:- EAT- 02,02,02,0 2,02,02 12 NOS 12,400.00 148800 Bagalkote-2,Haliyala- 2,Hadagali-2,Tiptur-2,Mandya- 2,Puttur-2 8 11,11 Earth Megger 500V, 100m ohms with metal body EAT- 02,02 3 Nos. 8000 24000 Tiptur-1,Puttur-2 9 7,7,7,7,7,7 Ellectric bell:-operating voltage 230 volts AC EBT- 02,02,02, BBBT- 02,EBT- 02,02 48 NOS 550 26400 Hadagali-8,Madikeri- 8,8,Mandya-8,Puttur-8,Tiptur- 8, 10 Fan (Bracket Fan 40 W) EBT-06 02 Nos 3500.00 7000 Haliyal 11 Fan (Ceiling fan 40 W, 1400 mm, 130 V) EBT- 03,04 05 Nos 1800.00 9000 Haliyal 12 228,22,22 SINGLE PHASE POWER FACTOR METER PORTEBLE TYPE ANALOG 5AMPS/300 VOLTS EBT- 05,05,05, 12 NOS 6000 72000 Gowribidnur-4,Puttur-4,Tiptur- 4 13 60 Ammerter MI type, Rectangular shape, flush mounting, size 106x84mm, multi range 0-5-10A -IMP make or equivalent ECAT-01 24 Nos. 6450 154800 Malavalli-08, shimoga-08, gurmitkal-08 LIST OF TOOLS & EQUIPMENTS TO BE PROCURED UNDER SHOPPING FOR PROJECT I.T.I's Page 209 14 86 Ammeter MI type , Portable AC multi range 0-5-10A-AE or equivalent ECBT-02 48 Nos. 3570 171360 Malavalli-16, shimoga-16, gurmitkal-16 15 92 Testing machine for calibration & testing of electrical starter, relay, contractor, solenoid valve. LP, HP, Oil pressure cut out. RACBT-6 1 No. 96400 96400 BIDAR 16 30 Transformer singul phase 500ma/250/120 FBT-06 4 NOS 1200 4800 KOOKNUR 17 32 THREE PHASE 415V INPUT AND VARIOUS TAPPINGS AT THE OUTPUT WITH 0-380-400-420, TRANSFORM 1 KVA EAT-02 02 Nos. 20000.00 40000 Puttur Page 210 18 13,13,13 Tranformer: 500VA, 230/180V, 220V, 240V, 260V, 280V tappings in secondary side EBT- 02,02,02 12 NOS 2500 30000 Madikeri-4,Puttur-4,Tiptur-4 19 22,N ,136,22 Transformer 0-12V, 6-0-6V, 1A EBT- 02,02,02,0 2 16 NOS 1450 23200 Bgalkote-4,Nalatwad- 4,Gowribidnur-4,HADAGALI-4 20 127,13,22, 13 Transformer 500 VA EBT- 02,02,02,0 2 16 NOS 3200 51200 Gowribudnur-4,Hadagali- 4,Nalatwad-4,Bagalkote-4 21 Transformer: 500VA, 230/180V, 220V, 240V, 260V, 280V tappings in secondary side EBT-02 4 Nos. 2,750 11000 Chitradurga 22 22 Transformers Secondary voltages 6-0-6 of 1 amps rating EBT-02 2 No. 500.00 1000 Puttur 23 22 Transformers: Secondary voltages 12-0-12, of 1 amps rating EBT-02 2 No. 600.00 1200 Puttur 24 22,N,22 Transformers: Secondary voltages 30V, 6-0-6,12-0-12, 15-0-15 of 5 amps rating EBT- 02,02,02 8 NOS 2298 18384 Madikeri-2,chitradurga - 2,Tiptur-2 25 25 Watt meter 1 KW Analog type, reputed company make. EBT-05 2 Nos 7000.00 28000 Puttur-04 26 10,10,10 Watt meter 10A. reputed company make. EAT- 02,02,02 3 Nos. 6900 20700 Hadagali-1,Haliyala-1,Tiptur-1 27 25 Watt meter 1 KW Digital reputed company make. EBT-05 2 Nos 7000.00 14000 Puttur 28 8 Wheat stone bridge complete with galvanometer and battery - with manuals EBT-05 2 Nos. 15000.00 30000 Puttur 29 32 SINGLE PHASE 230V INPUT AND VARIOUS TAPPINGS AT THE OuTPUT WITH 48v, 110v, 220v, TRANSFORMER 1 KVA EAT-02 02Nos. 9600.00 19200 Puttur 30 1,24,24 Single phase energy meter: digital type, reputed company make. EBT- 05,05,05 12 NOS 5000 60000 Nalatwad-4,Puttur-4,Tiptur-4 31 10,10 Single Phase Watt meter:- Digital type, reputed company make, 0-15 Amps. EAT- 02,02 2 NOS 8000.00 16000 Puttur-1,Tiptur-1 32 32,33 Star Delta starter (contact type 8 points) FBT-06,06 3Nos 5000 15000 Kookanur-1,BTCentre-2 33 232,26,26, N,26 Tacho Generator AC & DC Digital type EBT- 05,05,05,0 20 NOS 18500 370000 Gowribidnur-4,Mandya- 4,Puttur-4,chitradurga-4,Tiptur- 34 96 Technometer digital, multirange 0 rmp to 3000 rmp. Portable small size in leather case. RACAT- 02 2 Nos 18500 37000 KARWAR Page 211 35 1 Trainee tool kit:- it consist of following accessories .a) combination player 160mm b)diagnal cutter 160mm c)nose player d)wire stripper 100mm e)cablr cutter160mm f)slip joint player 1 g)junior hacksaw h)ellectrician knife heavy duty blade i)adjustable spanner j)screw driver set of 3 k)soldring iron 25watts/ 230volts make soldran bar pholips l)metalic desoldring pump m)neonglow tester 100mm n)stainless steeltweaser 100mm o)needle file set p)scalpels conmsisting of corben steel blade q)digital multi meter 3 ½ digit .allthe above tools and meters should be kept in a robust tool case. EAT- 01,03 128 sets 7100 908800 ,Tiptur-16, Chitradurga-16, Gowribidnur-16, Puttur-16, 16, Nalathwad-16, Bagalkot-16, Mandya-16, 3121744 Draft approved by the Commissioner) for Commissioner Joint Director(Trg) Rupees thirty one lakhs twenty one thousand seven hundred and forty four only Dept Of Employment & Training Page 212 NS-PKG-39 SL. NO. DGET SL. NO. DESCRIPTION OF THE ITEMS Module Code QTY REQD AS PER DGET Estimated Cost Per Unit TOTAL Estimated Cost Consignee Govt I.T.I 1 79,71,98,9 8,98 Transistor tester- for testing NPN/PNP,FET's, MOS FET's, their working condition and characteristics, in different configurations with digital display readout..- Siemen's or equivalent make. ECBT-03 EAT- 05,RACA T- 01,02,03 35 Nos. 61812 2163420 Karwar-10,Bidar-5, Malavalli- 2, shimoga-2,gurmitkal-2Tiptur- 02, Chitradurga-02, Gowribidnur-02, Puttur-02, Nalathwad-02, Bagalkot-02, Mandya-02 2 19 0 - 12V DC regulated power supply 5Amps with digital display with shortcircuit protection and over load protection - reputed co. Make. EBT-03 4 Nos. 6250.00 25000 Puttur 3 21,169 0-12 V DC ,2 Amp power supply, l/P voltage-230v-50hz , Line regulation=005%, ± 3mv for line voltage variation of ± 10% Load regulation: ± 005%, ± 3mv from load to full load microntrolled alha numeric display Ripple: 2mv Rms Protection: short circuit & over load protected o/p with micro controller based touch sensitive device for increment and decrement of voltage and current and remote control facility - reputed company make EBT- 02,03 8nos 7500 60000 Hadagali-4 Gowribidnur-4 4 5,175,5 5V/2A DC Power supply l/P voltage-230v-50hz , Line regulation=005%, ± 3mv for line voltage variation of ± 10% Load regulation: ± 005%, ± 3mv from load to full load microntrolled alha numeric display Ripple: 2mv Rms Protection: short circuit & over load protected o/p EBT- 04,04,BB BT-04 24 nos 4500 108000 Tiptur-8, Gowribidnur-8, Mandya-8. 5 35,35 D.C power Supply 0v - 110 v /5A with microcontroller based alpha numeric display and microcontrolled touch senitive system should be controlled remotely. FBT-06,06 3 NOS 12000 36000 Devdurga-2,Nanjangud-1 6 N,381,,27 Barcode reader:- small & light weight 1 D laser bar code scanning width leanear RSS support, wire less networking based on IEEE 802 communication serial, USB connectivity for MS windows soft ware. Powerd with rechargeble lithium iron battery. EAT- 03,03,03 3 NOS 48330 144990 chitradurga-1,Gowribidnur- 1,Puttur-03 7 13 Audio frequency generator: 10 -100 KHZ with digital display,sine distorton0.01%,with digital display. Scientek / Phillips / HP make EBT-03 3 Nos. 5500 27500 Tiptur LIST OF TOOLS & EQUIPMENTS TO BE PROCURED UNDER SHOPPING FOR PROJECT I.T.I's Page 213 8 156,176,1 34,20,20,2 0,6,6,6,6 BREAD BOARD: for connecting various companents for testing ckts,should have DCpower supply of 0- 15v(should have +, -, &Gnd points.) EBT- 03,04,02,0 2,02,02,03 ,04,04,03 80 Nos. 2500 200000 Gowribidnur- 08,08,08,Hadagali-08,Puttur- 08,08,08,,Tiptur-08,08,08 9 17,16 Colour T.V:- Flat CRT,with remote with latest technology reputed company make. EAT- 01,01 3 Nos. 20000 60000 Puttur-1,Tiptur-2 2824910 Draft approved by the Commissioner) Dept Of Employment & Training Joint Director(Trg) for Commissioner Rupees Twenty eight lakhs twenty four thousand nine hundred and ten only Page 214 NS-PKG-40 SL. NO. DGET SL. NO. DESCRIPTION OF THE ITEMS Module Code QTY REQD AS PER DGET Estimated Cost Per Unit TOTAL Estimated Cost Consignee Govt I.T.I 1 16,16,17,1 8 Artwork film maker EBT- 04,04,04,0 4,01 10 NOS 165000 1650000 Hadagali-2,Madikeri- 2,Nalatwad-2,Puttur- 2,chiradurga-2, 2 N,19,19,1 9,19 Art work table EBT- 4,BBBT- 04,EBT- 04,04,04 11 Nos 22000 242000 chitradurga-2,Mandya-4,Puttur- 2,Tiptur-02,Bagalkote-01 3 12,13,19,1 9 DUAL DC Power supply:- 0-30v,5A, l/P voltage-230v- 50hz , Line regulation=005%, ± 3mv for line voltage variation of ± 10% Load regulation: ± 005%, ± 3mv from load to full load microntrolled alha numeric display Ripple: 2mv Rms Protection: short circuit & over load protected o/p with micro controller based touch sensitive device for increment and decrement of voltage and current and remote control facility - reputed company make EAT- 01,02,03, EBT-03 17 NOS 16500 280500 Tiptur-4,1,8,4 4 13 Universalr/PAL Progamme:- To programme all type of EPROMS,FLASH MEMORY,PROM NOVRAM, MICROCONTROLLER, PLD, PAL, AND OTHER STANDARSLOGICS. .ighspeed progamming,chip identification, SECURITY FETURES:- multivoltage verification, multiple intefacing facility. Socket-48pin high qulity pin driver universal type. EAT-03 14 Nos. 21400 299600 Tiptur-02, Chitradurga-02, Gowribidnur-02, Puttur-02, Nalathwad-02, Bagalkot-02, Mandya-02 5 13,N,155, N Dual power supply :- I/P volt = 230v-50 hz Dual o/p varriable =0-30v at 2A Line regulation = 0.05%, ±3mv for line voltage variation of ±10% Load regulation= 0.05% ± 3m from no load to full load. Metering = Digital Ripple= 2mv Protect = S.C & over load protection EAT- 02,02,EBT- 03,EAT- 02 08 No. 17750 142000 Puttur-1,chitradurga- 1,Gowrbidnur-5,mandya-1 LIST OF TOOLS & EQUIPMENTS TO BE PROCURED UNDER SHOPPING FOR PROJECT I.T.I's Page 215 6 22,20,N IC based power supply 5V,12V,1 Amp Line regulation=0.05%, ± 3mv for line voltage variation of ± 10%. Load regulation:- ± 0.05%, ± 3mv from no load to full load. Metering:- microcontroller based Plasma.Ripple:- 2mv Rms. Protection:- short circute & over load protected o/p with remote controlled system EAT- 3,03,03 24 NOS 8000 192000 Nalatwad-8,Tiptur-8,Mandya-8 7 20 IC Based Power Supply 12V, 1A Line regulation=0.05%, ± 3mv for line voltage variation of ± 10%. Load regulation:- ± 0.05%, ± 3mv from no load to full load. Metering:- microcontroller based Plasma.Ripple:- 2mv Rms. Protection:- short circute & over load protected o/p with remote controlled system EAT-03 4 Nos 8000.00 32000 PUTTUR 8 20 IC Based Power Supply 5V, 1A Line regulation=0.05%, ± 3mv for line voltage variation of ± 10%. Load regulation:- ± 0.05%, ± 3mv from no load to full load. Metering:- microcontroller based Plasma.Ripple:- 2mv Rms. Protection:- short circute & over load protected o/p with remote controlled system EAT-03 4 Nos 7500.00 30000 PUTTUR Total Rs. Twenty eight Lakhs sixty eight thousand and one hundred only 2868100 Draft approved by the Commissioner) Joint Director(Trg) for Commissioner Dept Of Employment & Training Page 216 NS-PKG-41 SL. NO. DGET SL. NO. DESCRIPTION OF THE ITEMS Module Code QTY REQD AS PER DGET Estimated Cost Per Unit TOTAL Estimated Cost Consignee Govt I.T.I 1 52,348,31, 54,N,31,3 2,N,31,31, 28 Universal motor 230V,50 cycles,Micro controller based Alpha numeric LCD display MPB controller with VU and Mechanical loading arrangement EAT- 02,02,02,0 2,02,02,02 ,02,02,02, EBT-06 21 NOS 45000 945000 Bagalkote-2,Gowribidnur- 2,Hadagali-2,Nalatwad- 2,Mandya-1,Haliyala- 2,Madikeri-2,chitrdurga- 2,Puttur-2,Tiptur-2,kookanur-2 2 126,12,12, 12,13,13 Variable resistance /potentiometer EBT- 02,02,02,0 2,02,ABT- 03 24 NOS 400 9600 Gowribidnur-4,Hadagali- 4,Puttur-4,Tiptur-4,Nalatwad- 4,Honnavara-4 3 12 Variable resistance/Potentiometers 100Kohm EBT-02 8 Nos 400 3200 Bagalkot 4 18,18 VCD player with amplifier, for playing VCD - R/RW, mp3,-mp4 format with remove EAT- 01,01 8 NOS 4000 32000 Puttur-4,Tiptur-4 5 21,21,21, N,21,21,2 1,23 Volt meter Dinamo meter Type 0-50 V - Reputed company make EBT- 05,05,05,0 5,05,05,05 28 NOS 6500 182000 Madikeri-4,Puttur-4,Hadagali- 4,chitradurga-4,Tiptur- 4,Bagalkote-4,Nalatwad-4 6 31,31,31,3 1,N VTVM (solid state )reputed company make. EBT- 05,05,05,0 5,05,05 12 NOS 14500 174000 Hadagali-2,Madikeri-2 Puttur- 2,Tiptur-2,chitradurga-4 7 13,14,13,1 2,13 Washing machine:- full automatic, fuzzy logic controllrd temprature,and imbalence detection,self-diagnostics and operates suds free system.based,with latest technology ,10 kg front loadi ng.(reputed company make). EAT- 01,01,01,0 1,01 5 NOS 43500 217500 Hadagali-1,Nalatwad-1 8 13 Drill machine pillar 0-12mm cap.-Addision Make or equivalent ECBT-01 2 Nos. 39200 235200 Malavalli-02, shimoga-02, gurmitkal-02 9 27 Marking gauge 6" EBT-01 119 Nos 1450 172550 Tiptur-17, Chitradurga-17, Gowribidnur-17, Puttur-17, Nalathwad-17, Bagalkot-17, Mandya-17 10 5 Marking table 90x90x90 cm EBT-01 28 Nos. 11500 322000 Tiptur-04, Chitradurga-04, Gowribidnur-04, Puttur-04, Nalathwad-04, Bagalkot-04, Mandya-04 LIST OF TOOLS & EQUIPMENTS TO BE PROCURED UNDER SHOPPING FOR PROJECT I.T.I's Page 217 11 87 Voltmeter Portable AC, multi range, 0-150-300-AE or equivalent ECBT-02 48 Nos. 3570 171360 Malavalli-16, shimoga-16, gurmitkal-16 12 57,85 Watt meter single phase, single element(Flush mounting type) multi Range: 0-750-1500 watt rectangular shape- IMP make or equivalent ECAT-01 ECBT-02 72 Nos. 6500 468000 Malavalli-24, shimoga-24, gurmitkal-24 13 32 SINGLE PHASE 230V INPUT AND VARIOUS TAPPINGS AT THE OTPUT WITH 48V, 110V, 220V, TRANSFORMER 1KVA,THREE PHASE 415V INPUT AND VARIOUS TAPPINGS AT THE OUTPUT WITH 0- 380-400-420, TRANSFORM 1 Kva. EAT-02 2 Nos. 14500 29000 Tiptu-02 Twenty nine lakhs sixty one thousand four hundred and ten only 2961410 Draft approved by the Commissioner) Joint Director(Trg) for Commissioner Dept Of Employment & Training Page 218 NS-PKG-42 SL. NO. DGET SL. NO. DESCRIPTION OF THE ITEMS Module Code QTY REQD AS PER DGET Estimated Cost Per Unit TOTAL Estimated Cost Consignee Govt I.T.I 1 8031 based Microcontroller Trainer Kit (8bit) EAT-03 4 nos 28500 114000 Mandya 2 4,4,N,4,4, AM radio reciver kit:- mw/sw/fw radio receiver training kit consisting following features a) test points for measurement of voltage, current, wave forms b) pcb should have printed with block diagrames, componet values and wave forms pattrens and voltage levels at the point.c) facility to disconnect/ isolate stages for fauit creations and analysis/rectification d) each stage should have superate PCB's the above system should be mounted on a good looking cabinet. N,EAT- 01,01,01,0 1 20 nos 7000 140000 Mandya-4,Madikeri- 4,chitraduga-4,Tiptur-4,Puttur- 4 3 3,3,N,3,3, N AM/FM radio receiver :- The radio receiver should be stereo type and should consist of MW,SW bands. EAT- 01,01,01,0 1,N,01 24 nos 1430 34320 Tiptur-4,Madikeri- 4,chitradurga-4,Puttur- 4,Mandya-4, 4 4 10,10,16,1 6 Battary charger: 12/24V,DC 10 Amps with microcontroller based touch sensitive and remotely controlled EBT- 02,02,EAT- 02,02 11 NOS 8000 88000 Tiptur-4 Hadagali-4,Tiptur- 2,Haliyala-1 5 12,285 DC Power Supply 0-30V, 1A , l/P voltage-230v-50hz , Line regulation=005%, ± 3mv for line voltage variation of ± 10% Load regulation: ± 005%, ± 3mv from load to full load microntrolled alha numeric display Ripple: 2mv Rms Protection: short circuit & over load protected o/p with micro controller based touch sensitive device for increment and decrement of voltage and current and remote control facility - reputed company make EAT- 01,01 8 NOS 8100 64800 Hadagali-4,Gowribidnur-4 6 12 DC-power supply :- 0-30V,2A, l/P voltage-230v-50hz , Line regulation=005%, ± 3mv for line voltage variation of ± 10% Load regulation: ± 005%, ± 3mv from load to full load microntrolled alha numeric display Ripple: 2mv Rms Protection: short circuit & over load protected o/p with micro controller based touch sensitive device for increment and decrement of voltage and current and remote control facility - reputed company make EAT-01 4 Nos. 8100.00 32400 Puttur LIST OF TOOLS & EQUIPMENTS TO BE PROCURED UNDER SHOPPING FOR PROJECT I.T.I's Page 219 7 19 DVD Player &recorder blueray/dolby-digital-dts for playing VCD Read R-RW, MP3-MP4, DVD-RW supported file formate mpeg2 MPEG$.o/p composite ,s- video--etc with 5.1 speaker system 1000watts PMPO. EAT-01 2Nos. 3000.00 6000 Puttur 8 19 DVD players latest with USB ,SD card ports sony or philips or ONIDA EAT-01 4 4500 18000 Tiptur 9 11,11 Frequency counters with alpha numerical Plasma Display upto 20 Mhz, microcontrolled touch sensitive system, to be controlled remotely. EAT- 01,01 4 NOS 6250 25000 Tiptur-2,Puttur-2 10 81,81,81,3 4,23,27,20 ,9 Multimeter Digital type 3,1/2 disply 0-600 V DC/AC DC 10 amps 2M ohm testing for transistars with beefer. RACAT- 1,2,3,RAC BT- 4,3,5,6,EB T-05,05 53 NOS 8000 424000 Bidar-19,Bagalkote- 17,chitrdurga-17 11 23,23,23 Multimeter 0-5, 100, 200, 500 mill amperes 0-100-1000, 10000 ohms 0-150, 300,600V AC/DC FBT- 06,06,06 6 NOS 7000 42000 Nanjangud -2,BTCentre- 2,Devdurga-2 12 277,4,N mw/sw/fw radio receiver training kit consisting following features a) test points for measurement of voltage, current, wave forms b) pcb should have printed with block diagrames, componet values and wave forms pattrens and voltage levels at the point.c) facility to disconnect/ isolate stages for fauit creations and analysis/rectification d) each stage should have superate PCB's the above system should be mounted on a good looking cabinet. EAT - 01,01,01 12 NOS 9800 117600 Gowribidnur-4,Hadagali- 4,Mandya-4 13 325 Power supply 0-30V,5A , l/P voltage-230v-50hz , Line regulation=005%, ± 3mv for line voltage variation of ± 10% Load regulation: ± 005%, ± 3mv from load to full load microntrolled alha numeric display Ripple: 2mv Rms Protection: short circuit & over load protected o/p with micro controller based touch sensitive device for increment and decrement of voltage and current and remote control facility - reputed company make EAT-02 2 NOS 19700 39400 Gowribidanur 14 5 Power supply trainer: having facility of IC regulators using 78,79 and 317 series, and should have all test points, circuit diagram, and block diagram for measurement of voltage and waveforms with digital display with all short circuit protections and hig EBT-03 5 Nos. 10000.00 50000 Puttur 15 12 Pulse generator 20MHZ with digital display standerd make with reputed company, EBT-03 5 7600 38000 Nalatwad Page 220 16 21,21,21 SMPS Traineer 5V/12V: Transistor/Mosfet based, and it should have block diagram and circuit diagram on the PCB, and it should have sufficient test points to measure wave forms and voltage, and should be supplied with instructional manual. EAT- 03,03,03 6 Nos. 10000.00 60000 Puttur-2,Tiptur-2,Bagalkote-2 17 8,8 A.F. power meter:- Frequency range,0-100KHZ, Fullscale range:-2Watt,digital display.Reputed company make. EAT- 01,01 04 Nos. 9000.00 36000 Puttur-2,Tiptur-02 18 9,9 R.F. power meter:- Frequency ran ge,0-2GHZFullscale range:-2Watt,digital display.Reputed company make. EAT- 01,01 04 Nos. 8000.00 64000 Puttur-02,Tiptur-2 Bagalkote- 2,Gowribidnur-2 19 233,27,27, 27,27 FET Millivoltmeter EBT- 05,05,05,0 5,05 20 NOS 12900 258000 Gowribidnur-4,Hadagali- 4,Madikeri-4,Puttur-4,Tiptur-4. 1651520 Draft approved by the Commissioner) Rupees sixteen lakhs fifty one thousand five hundred and twenty only Joint Director(Trg) Dept Of Employment & Training for Commissioner Page 221 NS-PKG-43 SL. NO. DGET SL. NO. DESCRIPTION OF THE ITEMS Module Code QTY REQD AS PER DGET Estimated Cost Per Unit TOTAL Estimated Cost Consignee Govt I.T.I 1 20 Auto Transformer, continuous variation single phase, enclosed type: 0-270V 8A, EBT-03 2 NOS 4000 8000 tipturuttur 2 91 Four point relays AAT-03 4 Nos 8100 32400 Honnavara 3 31 L.F oscilloscope with Attenuation probes FBT-06 1 NOS 30000 30000 NANJANGUD 4 3 OHP/Epidiascope EAT-03 6 NOS 56000 336000 tipturuttur 5 17 Soldering iron 25 Watt: with antistatic mat for soldering CMOS IC's - Reputed Co. Make. EBT-03 4 Nos. 1000 4000 Puttur 6 N,66 Soldering iron 25W, 35W, 65W, 125W: reputed company make EBT-01,01 12 NOS 3800 45600 chitradurga-2, tipturuttur-4 7 4,66,4,4 Soldring iron 65W : reputed company make EAT- 02,EBT- 01,EAT- 02,02 10 NOS 550 5500 bagalkotealkote-2,Puttur- 6,tipturuttur-2 8 66 Soldring iron 125W: reputed company make EBT-01 4 Nos. 600 2400 Puttur 9 66 Soldring iron 35W : reputed company make EBT-01 4 Nos. 400 1600 Puttur 10 11,11,4,12,66,2,12 Soldring iron 25W : reputed company make EBT- 04,04,02,0 4,01,02,03 53 NOS 430 22790 bagalkote-8,Puttur- 33,Nalatwad-12 11 346,29,29, 51,29 3 Pt & 4 Pt starter EAT- 02,02,02,0 2,02,02 14 NOS 38000 532000 Gowribidnur-2,Hadagali- 4,tipturuttur-2,Nalatwad- 02,Haliyala -2 12 29,N 3POINT STARTER SUITABLE FOR CONTROL OF 5 HP DC MOTOR WITH REQUIRED METERING AND CONTROL SYSTEM EAT- 02,02 04Nos. 24800 99200 Puttur-2, chitradurga-2 13 8,8 Battery storage lead acid/Maintenance free 12 Volt 120 Ah EXIDE make EBT- 02,02 16NOS 32500 520000 Hadagali-8,tipturuttur-8 14 7,7,30,28, N,7,114 Clip on Meter – digital EAT- 02,02,02,0 2,02,02,R ACAT-2 16 NOS 7500 120000 hadagali-2,tiptur-2,nalatwad- 2,bagalkote-2,chitradugra- 2,puttur-2.Bidar-4 LIST OF TOOLS & EQUIPMENTS TO BE PROCURED UNDER SHOPPING FOR PROJECT I.T.I's Page 222 15 1,N,1 Crimping tool to crimp different sizes of lugs make reputed company EAT- 02,02,02 12 NOS 11600 139200 BGK-4,chitradugra-4,puttur-4 16 15 Grinder Reputed company make. EAT-01 1 Nos 15600 15600 Puttur 17 9,9,9 Hydrometer: for measuring specific gravity of battery electrolite EBT- 02,02,BB BT-02 12 NOS 790 9480 hadagali-4,puttur-4,mandya-4 18 17,17 LCR bridge reputed company make EAT- 03,03 4 NOS 14500 58000 bagalkote-2,hadagali-2 19 4,8,8,8,4,1 6,4,16,7,1 7,,9,4,8,N, N,N,4,4,16 ,16,8,16 Logic Clip: for CMOS and TTL IC's of 14 and 16 pin reputed company make. EBT- 04,EAT- 03,03,03, EBT- 04,06,BB BT- 04,06,EBT- 04,06,EAT- 03,EBT- 04,EAT- 03,03EBT- 04,,06,04, 04,06,06E AT- 03,EBT- 06 51 Nos 1200 61200 bagalkote-1,4,haliyala- 4,hadagali-4,1,2,mandya- 4,nalatwad-1,2,4,tiptur- 1,4,mandya-4,chitradugra- 1,2,haliyala-1,puttur-1,haliyala- 2,tiptur-2,puttur-4,2 20 3,15,3,15, 3,15,3,15 Logic probe: for TTL & cm OS 1c's reputed company make EBT- 04,06,BB BT- 04,06,EBT- 04,06,BB BT-04,06 13 NOS 1200 15600 hadagali-1,2,mandya-4,tiptur- 1,2,mandya-3 21 9,9,9,10,9, N,9,9 Logic Tester EAT- 03,03,03,0 3,03,03,03 ,03 32NOS 2000 64000 bagalkote-4,haliyala- 4,hadagali-4,nalatwad-4,tiptur- 4,mandya-4,madikeri-4,puttur- 4 22 10,10,10 Maxwell bridge setup, reputed comapany make EBT- 05,05,BB BT-05 9 NOS 14500 130500 hadagali-2,tiptur-2,mandya-5 Page 223 23 65,65,65,9 8 Megger 0-1000 M ohm & 2.5 KV to 5KV: reputed company make EBT- 01,BBBT- 01,EBT- 01,01 16 Nos. 12800 204800 puttur-4,mandya-4,tiptur- 4,gowribidnur-4 24 14 MI Ammeter 0-5 Amp Panel type - Reputed company make EBT-05 4 NOS 900 3600 tiptur 25 15 MI Ammeter 0-1 Amp Boxl Type - Reputed company make EBT-05 4 NOS 4000 16000 tiptur 26 13 MI Ammeter 0-1 Amp Panel Type - Reputed company make EBT-05 4 NOS 900 3600 tiptur 27 16 MI Ammeter 0-10 Amp box type - Reputed company make EBT-05 4 Nos. 1000 4000 Puttur 28 19,19 MI Volt meter 0-100 V box Type - Reputed company make EBT- 05,05 8 NOS 4350 34800 tiptur-4,bagalkote-4 29 20 MI Volt meter 0-50 V box Type - Reputed company make EBT-05 4 NOS 4000 16000 tipturuttur 30 13 Micro wave oven:- 2 Cubic ft capacity/1100 watt/10 power level, preset option,cooling, defrost reheat, programmable, sensor cooling, child safety lock, stainless steel cabinet, reputed company make. EAT-01 2 Nos (different make) 14000 28000 Puttur 31 20 Microwave oven EAT-01 1 NOS 14000 14000 Nalatwad 32 15 Mixer /Grinder:- Having jucer option with three separate blades. Reputed company make. EAT-01 2 Nos (different make) 4000 8000 tiptur 33 15 Mixer Having jucer option with three separate blades. Reputed company make. EAT-01 1 Nos 4000 4000 Puttur 34 5,5,5,3,3,3 Neon Testers, 500v:-High quality main testing screwdriver suitable for use on 150-700 volts having neon indicter.Reputed company make EAT- 02,02,02, FBT- 06,PMBT- 03,RACB T-2 46 NOS 550 25300 bagalkote-2,hadagali-2,puttur- 2,devdurga-17,KGF-6,Bidar- 17 35 9,5,5,2,2,2 ,9,21,9 NeonTesters:- high quality main testing screw driver suitable for use on 230-300 volts having Neon indicater & are sealed to prevent tampering, blade types are hardened & bakened crome-vandium steel of length & size 100x3.5mm EAT- 02,EBT- 02,03,04,0 5,06,EAT- 02,EBT- 01,EAT- 02 150 NOS 140 21000 puttur- 16,17,17,17,17,17,hadagali- 16,puttur-17,bagalkote-16. Page 224 36 215,5,9,9, 9,N Resistance ratio bridge setup, reputed company make EBT- 05,05,05,0 5,05,05 12 NOS 11400 136800 gowribidnur-2,nalatwad- 2,madikeri-2,puttur-2,BGK- 2,chitradugra-2 37 99,33 R.L.C bridge reputed company make RACAT- 3,RACBT- 5 6 NOS 39800 238800 Bidar-6 38 11 Rheostat variable values100 ohms,1k ohms,2k ohms,3kohms ,5k ohms,10k ohms,12kohms,15kohms,ALL2AMPS EBT-02 8 NOS 12500 100000 tiptur 39 217,11,11, 11 Shearing bridge setup reputed company make EBT- 05,05,05,0 5 8 NOS 14500 116000 gowribidnur-2,puttur-2,tiptur- 2,bagalkote-2 Rupees Thirty two lakhs Twenty Seven Thousand Seven hundred Seventy only. 3227770 Draft approved by the Commissioner) Dept Of Employment & Training Joint Director(Trg) for Commissioner Page 225 NS-PKG-44 SL. NO. DGET SL. NO. DESCRIPTION OF THE ITEMS Module Code QTY REQD AS PER DGET Estimated Cost Per Unit TOTAL Estimated Cost Consignee Govt I.T.I 1 2 On-Line UPS with isolation transformer suitable for Single Phase AC input and Singal Phase AC Output, Floor Mounted type, capacity 5 KVA Indicative , Back up time : 120 Minutes P&M,FAB, RAC,EM, EN,AUTO 48 Nos 83000 3984000 ALL 24 COE ITI's Each 2 Nos 3984000 Draft approved by the Commissioner) NS-PKG-45 SL. NO. DGET SL. NO. DESCRIPTION OF THE ITEMS Module Code QTY REQD AS PER DGET Estimated Cost Per Unit TOTAL Estimated Cost Consignee Govt I.T.I CAD/CAM Software compatible for siemens/Fanuc. Turning Module-8 licenses, Milling module-8 licenses (Cadem/Mastercam/Hypermill/Espirit) P & M  N 4000000 KGF-01, Belgaum-01, Kanakapura-01, Holenarasipura-01 4000000 Draft approved by the Commissioner) Dept Of Employment & Training Joint Director(Trg) for Commissioner Total Rs. Forty Lakhs Only Total Rs. Thirty Nine Lakhs Eightt Four Thousand Only LIST OF TOOLS & EQUIPMENTS TO BE PROCURED UNDER SHOPPING FOR PROJECT I.T.I's LIST OF TOOLS & EQUIPMENTS TO BE PROCURED UNDER SHOPPING FOR PROJECT I.T.I's Joint Director(Trg) for Commissioner Dept Of Employment & Training Page 226 Page 227 Page 228 Page 229 Page 230 Page 231 Page 232 Page 233 Page 234 Page 235 Page 236 Page 237 Page 238 Page 239 Page 240 Page 241 Page 242 Page 243 Page 244 Page 245 Page 246 Page 247 Page 248 Page 249 Page 250 Page 251 Page 252 Page 253 Page 254 Page 255 Page 256 Page 257 Page 258 Page 259 Page 260 Page 261 Page 262 Page 263 Page 264 Page 265 Page 266 Page 267 Page 268 Page 269 Page 270 Page 271 Page 272 Page 273 Page 274 Page 275 Page 276 Page 277 Page 278 Page 279 Page 280 Page 281 Page 282 Page 283 Page 284 Page 285 Page 286 Page 287 Page 288 Page 289 Page 290 Page 291 Page 292 Page 293 Page 294 Page 295 Page 296 Page 297 Page 298 Page 299 Page 300 Page 301 Page 302 Page 303 Page 304 Page 305 Page 306 Page 307 Page 308 Page 309 Page 310 Page 311 Page 312 Page 313 Page 314 Page 315 Page 316 Page 317 Page 318 Page 319 Page 320 Page 321 Page 322 Page 323 Page 324 Page 325 Page 326 Page 327 Page 328 Page 329 Page 330 Page 331 Page 332 Page 333 Page 334 Page 335 Page 336 Page 337 Page 338 Page 339 Page 340 Page 341 Page 342 Page 343 Page 344 Page 345 Page 346 Page 347 Page 348 Page 349 Page 350 Page 351 Page 352 Page 353 Page 354 Page 355 Page 356 Page 357 Page 358 Page 359 Page 360 Page 361 Page 362 Page 363 Page 364 Page 365 Page 366 Page 367 Page 368 Page 369 Page 370 Page 371 Page 372 Page 373 Page 374 Page 375 Page 376 Page 377 Page 378 Page 379 Page 380 Page 381 Page 382 Page 383 Page 384 Page 385 Page 386 Page 387 Page 388 Page 389 Page 390 Page 391 Page 392 Page 393 Page 394 Page 395 Page 396 Page 397 Page 398 Page 399 Page 400 Page 401 Page 402 Page 403 Page 404 Page 405 Page 406 Page 407 Page 408 Page 409 Page 410 Page 411 Page 412 Page 413 Page 414 Page 415 Page 416 Page 417 Page 418 Page 419 Page 420 Page 421 Page 422 Page 423 Page 424 Page 425 Page 426 Page 427 Page 428 Page 429 Page 430 Page 431 Page 432 Page 433 Page 434 Page 435 Page 436 Page 437 Page 438 Page 439 Page 440 Page 441 Page 442 Page 443 Page 444 Page 445 Page 446 Page 447 Page 448 Page 449 Page 450 Page 451 Page 452 Page 453 Page 454 Page 455 Page 456 Page 457 Page 458 Page 459 Page 460 Page 461 Page 462 Page 463 Page 464 Page 465 Page 466 Page 467 Page 468 Page 469 Page 470 Page 471 Page 472 Page 473 Page 474 Page 475 Page 476 Page 477 Page 478 Page 479 Page 480 Page 481 Page 482 Page 483 Page 484 Page 485 Page 486 Page 487 Page 488 Page 489 Page 490 Page 491 Page 492 Page 493 Page 494 Page 495 Page 496 Page 497 Page 498 Page 499 Page 500 Page 501 Page 502 Page 503 Page 504 Page 505 Page 506 Page 507 Page 508 Page 509 Page 510 Page 511 Page 512 Page 513 Page 514 Page 515 Page 516 Page 517 Page 518 Page 519 Page 520 Page 521 Page 522 Page 523 Page 524 Page 525 Page 526 Page 527 Page 528 Page 529 Page 530 Page 531 Page 532 Page 533 Page 534 Page 535 Page 536 Page 537 Page 538 Page 539 Page 540 Page 541 Page 542 Page 543 Page 544 Page 545 Page 546 Page 547 Page 548 Page 549 Page 550 Page 551 Page 552 Page 553 Page 554 Page 555 Page 556 Page 557 Page 558 Page 559 Page 560 Page 561 Page 562 Page 563 Page 564 Page 565 Page 566 Page 567 Page 568 Page 569 Page 570 Page 571 Page 572 Page 573 Page 574 Page 575 Page 576 Page 577 Page 578 Page 579 Page 580 Page 581 Page 582 Page 583 Page 584 Page 585 Page 586 Page 587 Page 588 Page 589 Page 590 Page 591 Page 592 Page 593 Page 594 Page 595 Page 596 Page 597 Page 598 Page 599 Page 600 Page 601 Page 602 Page 603 Page 604 Page 605 Page 606 Page 607 Page 608 Page 609 Page 610 Page 611 Page 612 Page 613 Page 614 Page 615 Page 616 Page 617 Page 618 Page 619 Page 620 Page 621 Page 622 Page 623 Page 624 Page 625 Page 626 Page 627 Page 628 Page 629 Page 630 Page 631 Page 632 Page 633 Page 634 Page 635 Page 636 Page 637 Page 638 Page 639 Page 640 Page 641 Page 642 Page 643 Page 644 Page 645 Page 646 Page 647 Page 648 Page 649 Page 650 Page 651 Page 652 Page 653 Page 654 Page 655 Page 656 Page 657 Page 658 Page 659 Page 660 Page 661 Page 662 Page 663 Page 664 Page 665 Page 666 Page 667 Page 668 Page 669 Page 670 Page 671 Page 672 Page 673 Page 674 Page 675 Page 676 Page 677 Page 678 Page 679 Page 680 Page 681 Page 682 Page 683 Page 684 Page 685 Page 686 Page 687 Page 688 Page 689 Page 690 Page 691 Page 692 Page 693 Page 694 Page 695 Page 696 Page 697 Page 698 Page 699 Page 700 Page 701 Page 702 Page 703 Page 704 Page 705 Page 706 Page 707 Page 708 Page 709 Page 710 Page 711 Page 712 Page 713 Page 714 Page 715 Page 716 Page 717 Page 718 Page 719 Page 720 Page 721 Page 722 Page 723 Page 724 Page 725 Page 726 Page 727 Page 728 Page 729 Page 730 Page 731 Page 732 Page 733 Page 734 Page 735 Page 736 Page 737 Page 738 Page 739 Page 740 Page 741 Page 742 Page 743 Page 744 Page 745 Page 746 Page 747 Page 748 Page 749 Page 750 Page 751 Page 752 Page 753 Page 754 Page 755 Page 756 Page 757 Page 758 Page 759 Page 760 Page 761 Page 762 Page 763 Page 764 Page 765 Page 766 Page 767 Page 768 Page 769 Page 770 Page 771 Page 772 Page 773 Page 774 Page 775 Page 776 Page 777 Page 778 Page 779 Page 780 Page 781 Page 782 Page 783 Page 784 Page 785 Page 786 NS-FUR-PKG-01 Sl No DGET SL NO. DESCRIPTION OF THE ITEMS Module Code QTY REQD AS PER DGET Estimated Cost Per Unit TOTAL Estimated Cost Consignee Govt I.T.I 1 6,6,6,6,6,6,8, 6,6,6,6,9,6,6, 6,6,8,6,9,3,3, 4,3,4,9,9,2,9, 9,9,9,9,9,9,6, 3,100,68,7,8, 8,8,8,8,68,74, 6,6,8,6,9,6,8, 6,8,8,9,12,8 STEEL ALMIRAH : Size 78" H x 36"W x 19" D (including legs of 15.24cm) fitted with four sheves making five compartments with double door with three way locking device controlled by implacable six lever lock with non- interchangeable keys in duplicate. Longitudinal rib of 15.24 cm wide including bent to require shape should be provided and fixed to each door at its center. The entire body shall be made using 20G CRCA sheet & door shall be made out of 18G CRCA sheet. The Almirah shall be de-rusted primer coated and finished in two coats of synthetic paint as per indentors choice. EAT-1,2,3, EBT-1,2,3,4,5,6, EAT- 3,1,2, FBT & FAT, EBT-1,2,3,4,5,6, EAT-1,2,3, EBT-6, EAT-1&2, EBT- 2,3,4,5,6,EAT-1,2,3, EBT-6, EAT-1, BBBT-4,5,6, RACAT-1 & 2, PMBT- 1,2,3,4,5,5, PMAT-01, ABT-4,5,6, AAT-1,2, FBT & FAT, ECBT-1,2,3, ECBT-1,2,4,5, EAT-1,3, BBBT-1 to 6, PMBT-1,2,3,4,5,5, PMAT-1, EBT- 3,4,5,6, EBT-3,4,5,6, ECBT- 1,2,3,4&5 188 Nos 10900 2049200 Bagalkote-20, Kookanur-6, Puttur-13, Mandya-4, Shimoga-10, Tiptur-20, Haliyal- 2, Huvinahadagali-1, Karwar-5, Honnavara- 5, Nanjangud-5, Malavalli-20, Gurumitkal- 17, Madikere-15, Gowribidanur-12, Nalathwad-8. Bijapur-20 Davangere-5 2 1,66,66,83. STEEL ALMIRAH WITH LOCKERS : Size 78" H x 36"W x 19" D (including legs of 15.24cm) fitted with a locker at the top and sheves below the locker with double door with three way locking device controlled by implacable six lever lock with non-interchangeable keys in duplicate. Longitudinal rib of 15.24 cm wide including bent to require shape should be provided and fixed to each door at its center. The entire body shall be made using 20G CRCA sheet & door shall be made out of 18G CRCA sheet. The Almirah shall be de-rusted primer coated and finished in two coats of synthetic paint as per indentors choice. ECBT-1, EAT-1,5. 8Nos 11300 90400 Malavalli-3, Gurmitkal-5 2139600 Draft approved by the Commissioner) Joint Director(Trg) for Commissioner LIST OF FURNITURES TO BE PROCURED UNDER SHOPPING FOR PROJECT I.T.I's Total rupees twenty One lakhs thirty nine thousand six hundred only Page 787 Dept Of Employment & Training Page 788 NS-FUR-PKG-02 Sl No DGET SL NO. DESCRIPTION OF THE ITEMS Module Code QTY REQD AS PER DGET Estimated Cost Per Unit TOTAL Estimated Cost Consignee Govt I.T.I 1 3,3,3,3,3,3,3, 3,2,2,2,2,2,2, 3,3,3,3,3,3,3, 2,2,2,2,2,2.2, 2,2,2,1,2,2 STEEL STOOL WITH LAMINATED TOP : Of size 15” x 15” at Top and 24” height. The top shall be made out of 19mm thick block board laminated with 1mm thick mica sheet. The frame shall be of MS square tubes 25mmx25mmx16G for verticals and 15 mm dia MS round tube of 18G for horizontals. RACAM-1,2,3, RACBT-2,4,5,6, PMAT-1,2,3, FBT-1 to 6, PMAT-1 to 3, PMBT-1 to 6, BBBT-1,2,5,6, RACAT-1,2,3, ABT-1,2,5,6, AAT- 1,2,3, FBT & FAT, FBT-1,2,3,4,5,6 & FAT-2,4&5, PMBT-2,5,5, PMAT- 1. ABT-1,2,6, 973Nos 1390 1352470 Bidar-170, Belgaum-51, BT Centre-50, KGF-136, Karwar-119, Honnavara-119, Nanjangud-137, Devarayasamudra-137, Kanakpura-68. Mangalore-72, Davangere- 51 2 8,8,8,8,8,8,5, 5,5,5,8,5,5,5, 8,8,9,9,2,2,3, 3,10,8,5,5,8,8 ,8,8,8,8,8,8,8, 8,8,8,5,6,6,6, 6,6,5,8,8,8,8, 8,8,5,8,5,5,7. 4,8,8 STEEL SLOTTED ANGLE RACK : Of size 6' H x 3' W x 15”D overall with four upright and five panels, the uprights shall be slotted angles of section 38x38x2mm. The panels should be of 20G fixed to the uprights by means of GI bolts of sizes 8mm x 16 mm by providing 16 nos standard gussets at corners. RACAM-1,2,3, RACBT-1,2, PMAT- 1,2,3, EAT-1,2,3, EBT-4,6, EAT- 3,1,2, FBT-1 to 6, FBT & FAT, EAT- 1,2,3, PMAT-1 to 3, PMBT-1 to 6, EBT-2,3,4,6, EAT-1,2,3, PMBT-5, EBT-3,5,6, BBBT-1,2,3,5,6, RACAT-1,2,3, ABT-1,2,3,5,6, AAT- 1,2,3, FABT & FAT, FBT- 1,2,3,4,5,6 & FAT-2,4&5, ECBT-1, ECBT-1,2,4,5, BBBT-1 to 6, EBT- 5,6, EBT-3,5,6. 180Nos 4250 765000 Bidar-5, Belgaum-3, Bagalkote-13, BT Centre-16, Kookanur-2, Mandya-3, KGF- 18, Tiptur-18, Holenarasipura-5, Haliyal-4, Karwar-14, Honnavara-16, Nanjangud-11, Devarayasamudra-5, Malavalli-8, Gurumitkal-10, Madikere-4, Kanakpura-12, Gowribidanur-2, Nalathwad-6. Davangere- 5 2117470 Draft approved by the Commissioner) Joint Director(Trg) for Commissioner Dept Of Employment & Training LIST OF FURNITURES TO BE PROCURED UNDER SHOPPING FOR PROJECT I.T.I's Total Rupees twenty one lakhs seventeen thousand four hundred seventy only. Page 789 NS-FUR-PKG-03 Sl No DGET SL NO. DESCRIPTION OF THE ITEMS Module Code QTY REQD AS PER DGET Estimated Cost Per Unit TOTAL Estimated Cost Consignee Govt I.T.I 1 9,9,9,9,8,9,9, 9,9,9,9,9,9,9, 9,9.9,9,5 STORAGE SHELF: Of overall size 6 1/2' H (Including leg of 6") X 3'W X 19"D with four shelves. The entire storage shelf shall be made out of 20G CRCA sheet. The storage shelf shall be de-rusted primer coated and finished in two coats of synthetic paint as per indentors choice. PMAT-1,2,3, FBT-1 to 6, PMAT- 1,2,3, PMBT-1 to 6, PMBT-5, BBBT- 1,2,3,5,6, RACAT-1,2,3, ABT- 1,2,3,5,6, AAT-1,2,3, FBT & FAT, FBT-1,2,3,4,5,6 & FAT-2,4&5, PMBT-2,3,4,5,5, PMAT-1. 119Nos 10900 1297100 Belgaum-6, BT Centre-18, KGF-18, Holenarasipura-5, Karwar-16, Honnavara- 16, Nanjangud-15, Devarayasamudra-14, Kanakpura-7,Davangere-4 2 7,7,7,7,7,7,7, 7,7,7,7,7,7,7, 7,7,7,7,7,7,7, 9,9,9,9,7,7,7, 7,7,7,9,7,7,7, 7,5 BOOK CASE : Of size 66” H x 32” W x 14” D with four glass doors disappearing type moving on roller bearings. The book case shall be made out of 20G X 22G CRCA sheet. RACAM-1,2,3, RACBT-2,4,5,6, PMAT-1,2,3, FBT-1 to 6, PMBT-1 to 6, PMAT-1 to 3, BBBT- 3,5,6,RACAT-1,2,3, ABT-3,5,6, AAT-1,2,3, FBT&FAT, FBT- 1,2,3,4,5,6 & FAT-2,4&5, ECBT-1, ECBT-1,4,5, PMBT-1,2,3,4,5, PMAT-1, ECBT-1,3,4, ABT-2,3 71Nos 10500 745500 Bidar-9, Belgaum-3, Bagalkote-7, KGF-8, Karwar-6, Honnavara-6, Nanjangud 7, Devarayasamudra-7, Malavalli-1, Gurumitkal-3, Kanakpura-6., Bijapur-3, Davangere-3, Mangalore-2. 2042600 Draft approved by the Commissioner) Joint Director(Trg) for Commissioner Dept Of Employment & Training LIST OF FURNITURES TO BE PROCURED UNDER SHOPPING FOR PROJECT I.T.I's Total Rupees twenty lakhs forty two thousand six hundred only Page 790 NS-FUR-PKG-04 Sl No DGET SL NO. DESCRIPTION OF THE ITEMS Module Code QTY REQD AS PER DGET Estimated Cost Per Unit TOTAL Estimated Cost Consignee Govt I.T.I 1 2,2,2,2,2,2,4, 2,5,2,2,2,2,2, 4,2,5,2,1,1,2, 2,2,2,2,2,73,1 04,3,4,4,4,4,7 3,78,89,2,2,4, 2,5,2,2,4,2,5. REVOLVING STOOL: Of standard size. The chair shall have four legs made using 1" dia round MS tube of 18G. The top shall be made out of stainless steel plate of 20G fixed on MS flat frame. The chair shall have a sturdy screw rod system for height adjustment. EAT-1,2,3, EBT-1,2,3,4,5,6, EAT- 3,1,2, EBT-1,2,3,4,5,6, EBT-3, EAT- 1,2,3, EBT-1,2,4,5,6, EBT- 2,3,4,5,6, EBT-,3,5,6, ECBT-2, ECBT-2,4,5, EAT-1,3,5, EBT- 2,3,4,5,6, EBT-2,3,4,5,6. 839Nos 1565 1313035 Bagalkote-151, Puttur-96, Mandya-144, Tiptur-80, Haliyal-48, Malavalli-64, Gurumitkal-96, Gowribidanur-80, Nalathwad-80. 2 11,102,70,76, 1 INSTRUCTOR TABLE-SMALL : Of size 1.22, L x 0.61m W x 0.75m H overall the top shall be made of particle board with 1mm thick decorative laminate, with rounded comers and teal wood beading all-round. The table shall have a steel box containing three drawers unit of size 43cm H x 35cm W x 56cm D made out of 20g MS sheets. The drawers shall have full width recess box type handle with single automatic locking device. The MS tubes used shall be either square or round with 16G, thickness. The table shall be de-rusted primer coated and finished in two coats of synthetic paint as per indentors choice. EAT-1,2,3, ECBT-1, EAT-1,3, BBBT-1 to 6. 28Nos 7500 210000 Tiptur-3, Malavalli-3, Gurumitkal-2, Madikere-20. 3 3,3,3,3,3,3,10 INSTRUCTOR TABLE-BIG: Of overall size 5' L x 3' W x 30" H with three drawers on the right side with automatic locking device and a cupboard with a shelf on the left side side with square legs of section of 25mm x 25mm 16G. The top shall be of 20m thick width teakwood beading alround. The table shall be derusted, primer coated and painted with synthetic enamel paint as per indentors choice. All components shall be made out of MS sheet of 20G. EAT-1,2,3,3,1,2, EAT-1,2,3, 12Nos 9000 108000 Bagalkote-6, Mandya-3. Davangere-1, Shivmogga-02 LIST OF FURNITURES TO BE PROCURED UNDER SHOPPING FOR PROJECT I.T.I's Page 791 4 103,71,71,77, 87, STUDENT TABLE: Of overall size 2'X3'X30". Steel table with laminated top with one drawer and a cupboard. The frame shall be made out of 25mm square MS tube of 18G. The drawers unit shall be made out of 22 G CRCA sheet. The table top shall be made out of 18mm thick prelaminated block board with teak wood beading. ECBT-2, EAT-1,3,5, 80Nos 4930 394400 Malavalli-32, Gurumitkal-48. 2025435 Draft approved by the Commissioner) Joint Director(Trg) for Commissioner Dept Of Employment & Training Total Rupees Twenty Lakhs twenty five thousand four hundred thirty five Only Page 792 NS-FUR-PKG-05 Sl No DGET SL NO. DESCRIPTION OF THE ITEMS Module Code QTY REQD AS PER DGET Estimated Cost Per Unit TOTAL Estimated Cost Consignee Govt I.T.I 1 4,4,4,4,4,4,4, 4,4,4,4,4,4,4, 4,4,4,4,4,4,4, 4,4,4,4,4,4,4, 4,4,4,4,4,3,2 TOOL CABINET: Of overall size 78"H X 36W X 19" D.with double door. The entire cabinet shall be made using 20G CRCA sheet. RACAM-2,3, RACBT-1,2,3,4,5,6, PMAT-1,2,3, FBT-1 to 6, PMAT-1 to 3, PMBT-1 to 6, BBBT-1,2,3,4, RACAT-1,2,3, ABT-1,2,3,4, AAT- 1,3, FBT&FAT, FBT-1,2,3,4,5,6 & FAT-2,4&5, PMBT-2,3,4,5,5, PMAT- 01, 120Nos 13000 1560000 Bidar-9, Belgaum-6, BT Centre-14, KGF- 20, Karwar-14, Honnavara-14, Nanjangud- 12, Devarayasamudra-12, Kanakpura-12. Davangre-7 2 8,6 SHOE RACK: Of standard dimension made out of 1/2" MS tubular structure with five shelves. BBBT-5, ABT-6. 6Nos 1300 7800 Karwar-2, Honnavara-2, Davangere-2 1567800 Draft approved by the Commissioner) Joint Director(Trg) for Commissioner Dept Of Employment & Training NS-FUR-PKG-06 Sl No DGET SL NO. DESCRIPTION OF THE ITEMS Module Code QTY REQD AS PER DGET Estimated Cost Per Unit TOTAL Estimated Cost Consignee Govt I.T.I 1 5,5,5,5,5,5,5, 7,7,7,7,9,7,7, 7,5,5,5,5,7,7, 10,5,5,5,5,6,7 ,7,7,7,7,7,5,5, 5,3 TRAINEES LOCKERS : Industrial type locker cup board size 0f 78”H x 36” W x 17” D with 18 doors having external locking arragement for each compartment. Each door shall be provided with handle and name plate. The locker shall be made out of 20G x 22G CRCA Sheet. RACAM-1,2,3, RACBT-6, PMAT- 1,2,3, EAT-1,2,3, EBT-1,4, EAT- 2,3,1, FBT-1 to 6, FBT & FAT, EAT- 1,2,3, PMAT-1 to 3, PMBT-1 to 6, EBT-3,5,6, RACAT-2,3, FBT & FAT, FBT-1,2,3,4,5,6 & FAT- 2,4&5, ECBT-1, ECBT-1,2,4,5, BBBT-1 to 6, PMBT-1,5, PMAT-1. ABT-3 124 Nos. 15000 1860000 Bidar-6, Belgaum-6, Bagalkote-14, BT Centre-12, Kookanur-4, Mandya-3, KGF- 14, Haliyal-3, Karwar-4, Nanjangud-12, Devarayasamudra-12, Malavalli-4, Gurumitkal-12, Madikere-2, Kanakpura-4. Davangere-7, Mangalore-2, shivmogga-03 1860000 Draft approved by the Commissioner) Joint Director(Trg) for Commissioner Dept Of Employment & Training LIST OF FURNITURES TO BE PROCURED UNDER SHOPPING FOR PROJECT I.T.I's Total Rupees fifteen lakhs sixty seven thousand eight hundred only LIST OF FURNITURES TO BE PROCURED UNDER SHOPPING FOR PROJECT I.T.I's Total Rupees Eighteen lakhs sixty thousand only Page 793 NS-FUR-PKG-07 Sl No DGET SL NO. DESCRIPTION OF THE ITEMS Module Code QTY REQD AS PER DGET Estimated Cost Per Unit TOTAL Estimated Cost Consignee Govt I.T.I 1 10,10,10,2,10 ,10,10,1,1,1,2 ,4,2,2,1 COMPUTER TABLE: Of overall size 4'L x 2'W x 30"H. The table shall be made out of 19mm thick prelaminated particle board. All the exposed edges shall be neatly edge binded 2mm thick PVC tape machiune pressed using UVA hot melt glue. The table shall be provided with one drawer and a pull out keyboard tray. The table shall be provided with twin wheel castors with brakes. EAT-1,2,3,EBT-4, EAT-2,3,1, FBT & FAT, EBT-4, PMBT-3, EBT-6, EAT-1, EBT-6, EBT-6. 70 Nos. 7000 490000 Bagalkote-11, Kookanur-9, Mandya-3, KGF- 8, haliyal-8, Huvinahadagali-5, Gowribidanur-3, Nalathwad-3.Davangere- 20 2 3,3,3,3,3,3,3, 3,3,3,3,3,3,3. 3,3 DISCUSSION TABLE (as per drawing enclosed) PMAT-1,2,3, FBT-1 to 6, PMBT-1 to 6, PMAT-1 to 3, RACAT-2, AAT- 2,3, FBT & FAT, PMBT-2,3,4,5,5, PMAT-1,3. ABT-2,3 38 Nos. 10000 380000 Belgaum-3, BT Centre-2, KGF-9, Karwar- 2, Honnavara-2, Nanjangud- 9, Kanakpura- 8. Davangere-1, Mangalore-2 3 1,4,9,4,4. TABLE FOR PRINTERS AND SCANNERS: Of overall size 2'X3'X30". The table shall be made out of 19mm thick prelaminated particle board. All the exposed edges shall be neatly edge binded 2mm thick PVC tape machiune pressed using UVA hot melt glue. The table shall be provided with one shelf below to store papers. EBT-6, EBT-6, EBT-6, ECBT-1, EBT-6, EBT-6. 12 Nos. 4350 52200 Mandya-2, Tiptur-3, Haliyal-2, Malavalli-1, Gowribidanur-2, Nalathwad-2. 4 6,4,105,9. White Board with Aluminium frame size = 8' X 4' EAT-1,2,3, FBT & FAT, ECBT-1. 14 Nos. 11895 166530 Tptur-8, Nanjangud-3, Malavalli-3 5 5,3, MAGNETIC WHITE BOARD WITH ALUMINIUM FRAME: Of Size = 8” X 4” EAT-1,23, ECBT-1, ECBT-1, FBT & FAT. 15 Nos. 7850 117750 Tiptur-4, Karwar-3, Honnavara-3, Nanjangud-5 6 1, DRAWING BOARD (as per drawing enclosed) FBT & FAT 17 Nos. 3000 51000 Nanjangud- 17 8 5,5, Green Ceramic Board with an aluminium frame size = 8' X 4' ECBT-1, ECBT-5 2 Nos. 12150 24000 Malavalli-1, Gurumitkal-1 1281480 Draft approved by the Commissioner) Joint Director(Trg) for Commissioner Dept Of Employment & Training LIST OF FURNITURES TO BE PROCURED UNDER SHOPPING FOR PROJECT I.T.I's Total Rupees twelve lakhs eighty one thousand four hundred eighty only Page 794 NS-FUR-PKG-08 Sl No DGET SL NO. DESCRIPTION OF THE ITEMS Module Code QTY REQD AS PER DGET Estimated Cost Per Unit TOTAL Estimated Cost Consignee Govt I.T.I 1 10,10,10,2,10 ,10,10,1,1,1,2 ,4,2,2,2 COMPUTER CHAIR: The seat and back shall be made using high-density moulded foam. The seat and back shall have ABS back. The chair shall have PU armrest. The base shall be strong five pronged nylon base fitted with twin wheel castors for smooth movement. The base shall have pneumatic gas lift for height adjustment. EAT-1,2,3,EBT-4, EAT-2,3,1, FBT & FAT, EBT-4, PMBT-3, EAT-1, EBT-6. 68 Nos. 3000 204000 Bagalkote-11, Kookanur-9, Mandya-3, KGF- 17, Huvinahadagali-5, Gowribidanur- 3.Davangere-20 2 8, CUSHION CHAIR WITH ARMS: The frame shall be made out of 25mm dia round MS tube of 18G. The entire frame shall be neatly powder coated. The seat & back shall be made out of hot pressed ply provided with high density moulded foam upholstered with good quality fabric. The arm rets shall be of mpolyeurathane material. EAT-1,2,3 12 Nos. 3600 43200 Tiptur-12 3 103,71,71,77, 87, STUDENT CHAIR: The chair shall made using 3/4" dia MS tubular frame with 18G CRCA sheet perforated sheet for the seat and back. The entire chair shall be neatly powder coated. ECBT-2, EAT-1,3,5, 80 Nos. 1660 132800 Malavalli-32, Gurumitkal-48. 4 4,4,4,4,4,4,4, 7,4,5,4,4,4,4, 4,6.11, EXECUTIVE REVOLVING CHAIR: Executive revolving chair with PU armrests & tilting and revolving arrangement of standard size with high density moulded foam for the seat and back upholstered with good quality fabric. The chair shall be with full high back with head rest and to be fitted on the Nylon revolving base with 5 prongs fitted with twin wheel castors. . EAT-1,2,3,3,1, EAT-1,2,3, EBT- 1,2,3,4,5,6, EBT-3,5,6, EAT-1, BBBT-1 to 6, EBT-1,2,3,4,5,6. 50 Nos. 7800 390000 Bagalkote-5, Mandya-45, Haliyal-3, Huvinahadagali-1, Madikere-20, Nalathwad- 6. Davangere-1 LIST OF FURNITURES TO BE PROCURED UNDER SHOPPING FOR PROJECT I.T.I's Page 795 5 12,75, INSTRUCTOR CHAIR: 'S' type continuous Armed chair, the seat & back knitted with nylon cane. The Tubular frame should be of 25mm dia 16 gauge MS tube & Steel table size 48"x 24"x 30". The top shall be made of 19mm thick block board with rounded corners and Teak wood beading all-round & with 3 drawers unit of size 17” X 14” X 22 made out of 20g EAT-1,2,3, EAT-3. 5 Nos. 2500 12500 Tiptur-3, Gurumitkal-2. 6 2,2,2,2,2. DUEL DESK: of size 60"L made out MS tubular frame. The table top and the seat shall be made out of 18mm thick plywood laminated with 1mm thick decorative laminate. The desk shall be provided with a shelf (As per the drawing). RACAM-1,2,3, RACBT-1,2. 34 Nos. 9000 306000 BIdar-34 7 2,2 Z' TYPE DESK : Of size 6' length with fabricated in tubular steel pipe with wooden plank (As per drawing enclosed). EAT-1,2,3, EAT-1. 96 Nos. 7440 714240 Tptur-45, Huvinahadagali-51 8 2, REVERSIBLE DESKS: (Honne/Salwood). Specifications: Cast iron folding legs of 26kgs for 2Nos. The writing plank is of size 182.88cmL X 30.0cmB X 2.5cm thickness. The sitting plank is of size 182.88cmL X 25.4cmB X 3.048cm thickness. The writing and sitting planks are fixed using bolts nuts and washers and planks are neatly polished. FBT & FAT, 30 Nos. 6995 209850 Kookanur-30. 2012590 Draft approved by the Commissioner) Joint Director(Trg) for Commissioner Dept Of Employment & Training Total Rupees twenty lakhs twelve thousand five hundred ninety only Page 796 NS-FUR-PKG-09 Sl No DGET SL NO. DESCRIPTION OF THE ITEMS Module Code QTY REQD AS PER DGET Estimated Cost Per Unit TOTAL Estimated Cost Consignee Govt I.T.I 1 1,1,1,1,11,2,9 9,67,67,73,84 ,1, 10,75,3,3,75. 55,54,44,1 WORK BENCH: Suitable Practical work tables of size (2.5 x1.20x0.9m) with M.S. Angle (As per Drawing enclosed) EBT-1, PMBT-3, EBT-5,6, EAT-1, ECBT-1, EAT-1,3,5, EBT-1,ECBT- 1, ECBT-5,4, EAT-1,AAT- 01,02,ABT-05, ABT-1 58Nos. 32000 1856000 Bagalkote-2, KGF-4, Haliyal-4, Huvinahadagali-2, Malavalli-13, Gurumitkal- 14, Gowribidanur-2, Honnavara-10, Davangere-5, Mangalore-2 1856000 Joint Director(Trg) forCommissioner, Employment & Training NS-FUR-PKG-10 Sl No DGET SL NO. DESCRIPTION OF THE ITEMS Module Code QTY REQD AS PER DGET Estimated Cost Per Unit TOTAL Estimated Cost Consignee Govt I.T.I 1 1,1,1,4,1,1,1, 1,2,2,2,2,1, WORK BENCH : of size (2.5 x1.20x0.9m) with M.S. Angle on top 1 mm MS Sheet(As per Drawing enclosed) PMAT-1,2,3, FBT & FAT, PMBT- 2,4,5,6, PMAT-1to3, RACAT-3, AAT-3, FBT & FAT, FBT- 1,2,3,4,5,6 & FAT-2,4&5, ECBT-1, ECBT-5,4,3, EBT-1, PMBT-2,5,5, PMAT-1. 64 Nos. 30200 1932800 Belgaum-6, Kookanur-10, KGF-11, Karwar-2, Honnavara-2, Nanjangud-11, Devarayasamudra-11, Malavalli-1, Gurumitkal-3, Madikere-3, Kanakpura-4. 1932800 Joint Director(Trg) forCommissioner, Employment & Training LIST OF FURNITURES TO BE PROCURED UNDER SHOPPING FOR PROJECT I.T.I's Total Rupees Eighteen lakhs fifty six thousand only LIST OF FURNITURES TO BE PROCURED UNDER SHOPPING FOR PROJECT I.T.I's Draft approved by the Commissioner) Total Rupees Nineteen Lakhs Thirty Two Thousand Eight Hundred Only Draft approved by the Commissioner) Page 797 NS-FUR-PKG-11 Sl No DGET SL NO. DESCRIPTION OF THE ITEMS Module Code QTY REQD AS PER DGET Estimated Cost Per Unit TOTAL Estimated Cost Consignee Govt I.T.I 1 1,1,1,1,1,1,1, 1,1,1,1,1,3,3, 3,1,1,1,1,1,1, 1,1, ELECTRONIC WORK BENCH        EAT-1,2,3, EBT-2,3,4,5,6, EAT- 3,1,2, FBT-6, EAT-1,2,3, EBT-2, ECBT-1, ECBT-3,2, BBBT-2 to 5, EBT-2,3,4,5, EBT-2,5,6. 72 Nos. 16300 1173600 Bagalkote-12, BT Centre-4, Mandya-4, Malavalli-2, Gurumitkal-8, Madikere-16, Gowribidanur-24, Nalathwad-2. 1173600 Joint Director(Trg) forCommissioner, Employment & Training LIST OF FURNITURES TO BE PROCURED UNDER SHOPPING FOR PROJECT I.T.I's Total Eleven Lakhs Seventy Three Thousand Six Hundred Only Draft approved by the Commissioner) Page 798 NS-FUR-PKG-12 Sl No DGET SL NO. DESCRIPTION OF THE ITEMS Module Code QTY REQD AS PER DGET Estimated Cost Per Unit TOTAL Estimated Cost Consignee Govt I.T.I 1 62 Arc welding table 822x92x60 cm all metal with positioner (appox)(As per Drawing enclosed) FBT-04,FAT-04 48 Nos 24600 1180800 BT Centre,B-22-12, Devraysamudra-12, Kooknur-12, Nanjangud-12 2 16 Metal stand table for surface plate 900x500x750mm (As per Drawing enclosed) PMBT-01, FBT-01 32 Nos. 21500 688000 KGF-04, Belgaum-04, Kanakapura-04, Holenarasipura-04,BT Centre,B-22-04, Devraysamudra-04, Kooknur-04, Nanjangud-04 3 16 Metal stand table for surface plate 650 x 650 x 1200mm.(As per Drawing enclosed) RACBT-I 4 Nos. 21600 86400 Bidar-02, Karwar-02 1955200 Joint Director(Trg) forCommissioner, Employment & Training NS-FUR-PKG-13 Sl No DGET SL NO. DESCRIPTION OF THE ITEMS Module Code QTY REQD AS PER DGET Estimated Cost Per Unit TOTAL Estimated Cost Consignee Govt I.T.I 1 62,64,64,61 Gas welding table 82cm x 92 cm x 60 cm fire bricks on stand (As per Drawing enclosed) FAT-01,03,04, FBT-04 48 Nos 28300 1358400 BT Centre,B-22-12, Devraysamudra-12, Kooknur-12, Nanjangud-12 2 15,15 Marking table 1200 x 1200 x 900 mm(As per Drawing enclosed) FBT-03,03 2Nos 25600 51200 BT Centre,B-22-01 Nanja,ngud-01 3 5 Marking table 90x90x90 cm(As per Drawing enclosed) EBT-01 20 Nos. 22500 450000 Haliyala-2,Hadagali-2,Tiptur-02, Chitradurga-02, Gowribidnur-02, Puttur-02, Nalathwad-02, Bagalkot-02, Mandya-02, Madikeri-02 1859600 Joint Director(Trg) forCommissioner, Employment & Training LIST OF FURNITURES TO BE PROCURED UNDER SHOPPING FOR PROJECT I.T.I's Draft approved by the Commissioner) Total Rupees Nineteen Lakhs Fifty Five Thousand Two Hundred Only LIST OF FURNITURES TO BE PROCURED UNDER SHOPPING FOR PROJECT I.T.I's Total Rupees Eighteen Lakhs Fifty Nine Thousand Six Hundred Only Draft approved by the Commissioner)